Raspberry Pi 5 Ssd Sata
Los 10 mejores productos de octubre de 2025
Última actualización:
7 de octubre de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 Pulgadas SATA HDD/SSD Expansion Board Compatible con UASP para Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Solamente (no Incluye Raspberry Pi)
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € EN AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0FGPSRQ75)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € EN AMAZON
Raspberry Pi
Raspberry Pi SSD 256 Go
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Factor de forma M.2 2230
Cumple con el estándar PCIe Gen 3
Interfaz de registro NVMe 1.4 y conjunto de comandos
Requiere un adaptador M.2 compatible con Raspberry Pi 5, como el Raspberry Pi M.2 HAT+ (se vende por separado).
NVMe de 256 GB – 40 K IOPS (lecturas aleatorias de 4 kB), 70 K IOPS (escrituras aleatorias de 4 kB)
NVMe de 512 GB – 50 K IOPS (lecturas aleatorias de 4 kB), 90 K IOPS (4 kB escrituras aleatorias)
47,00 € EN AMAZON
Geekworm
Geekworm X825-C8 Case, Only Support X825 V2.0 2.5 Inch SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Not Included)
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
20,00 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Pimoroni
Pimoroni NVMe Base (M.2 2230, 2242, 2260 y 2280) SSD PCIe para Raspberry Pi 5 (¡hasta 800 MB/s!)
31% Descuento
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
solución perfecta para un servidor de archivos o centro multimedia Raspberry Pi 5
sigue las pautas proporcionadas por Raspberry Pi para garantizar la compatibilidad con el sistema operativo Raspberry Pi
solo para uso con SSD NVMe M.2; ¡no funcionará con discos SATA!
funciona con Raspberry Pi 5 (¡no incluido!)
protege de forma segura su disco NVMe
23,06 € EN AMAZON
Coolwell
PCIe to 2-Channel SATA Hat+ Adapter for Raspberry Pi 5, SATA 3.0 Expansion Board with Dual SATA Ports, LED Indicators, EEPROM, Plug and Play, High-Speed HDD/SSD Storage Support
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
✅ High-Speed PCIe to 2-Port SATA 3.0 Adapter for Raspberry Pi 5: This dual-channel PCIe to SATA HAT+ supports SATA 3.0 (6Gbps) for fast and stable HDD/SSD storage, specially designed for Raspberry Pi 5 via 16PIN PCIe interface.
🔌 Plug and Play SATA Expansion Board, Driver-Free Setup: No driver installation needed—this SATA HAT+ adapter is fully plug-and-play on Rasp-berry Pi 5, allowing for quick setup of external storage with zero hassle.
💡 Onboard Dual LED Indicators for Status Monitoring: Features two status LEDs for each SATA port, making it easy to monitor SATA HDD/SSD activity and system operation at a glance.
📦 Integrated EEPROM for HAT ID and Product Info Storage: The onboard EEPROM stores the HAT+ identity and technical details, ensuring compatibility with the Rasp-berry Pi HAT+ standard and auto-recognition on boot.
🛠️ Compact, Reliable SATA Expansion for Raspberry Pi NAS Projects; Perfect for building your own Rasp-berry Pi NAS, media server, or data backup system—this 2-Port SATA PCIe adapter is compact, efficient, and ideal for DIY storage solutions.
25,91 € EN AMAZON
Freenove
Freenove Dual M.2 NVMe SSD Hat for Raspberry Pi 5, M.2 Adapter AI Hat 2 Slots NAS Raid Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 MAX Speed 500 MB/s, Detailed Tutorial
Envío gratis
67
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € EN AMAZON
raspberry pi 5 ssd
ssd raspberry pi 5
adaptador ssd sata raspberry pi 5
raspberry pi 5 sata
sata raspberry pi 5
raspberry pi 5 16gb ssd
raspberry pi 5 8gb ssd
hat raspberry pi 5 ssd
raspberry pi 5 ssd hat
raspberry pi 5 ssd 2.5
#1 GANADOR
