Raspberry Pi 5 Ssd 2.5
Los 10 mejores productos de julio de 2025
Última actualización:
28 de julio de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
GeeekPi
GeeekPi W01 U2500 USB 2.5G Ethernet PCIe a M.2 NVMe SSD Shield para Raspberry Pi 5, Placa Periférica Superior (SSD y Pi5 No Incluidos)
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
El adaptador W01 U2500 M.2 NVMe a PCIe está diseñado para la última Raspberry Pi 5. Soporta la instalación de unidades NVMe (llave M) en tamaños de formato M.2 2230 y 2242. Tornillo de montaje CNC SSD extra personalizado, no requiere soldadura.
Interfaz PCIe x1 en estándares Gen2 y Gen3. El enrutamiento de seguimiento corto de PCIe es más fiable y rápido, cumpliendo plenamente los requisitos de señal de PCIe 3.0.
El diseño hueco proporciona un excelente flujo de aire de ventilación para la refrigeración; regulador de voltaje integrado que ofrece hasta 3 A para el riel de alimentación de 3.3 V, cumple con el estándar M.2 (NGFF).
Velocidades ultrarrápidas: desbloquea velocidades de red ultrarrápidas de hasta 2.5 Gigabit por segundo, asegurando un rendimiento suave y sin retrasos para tus actividades en línea.
Viene con una cinta FPC PCIe, tornillos M2 y M2.5, espaciadores y tornillo de montaje CNC SSD extra personalizado.
27,99 € EN AMAZON
ZDE
ZDE ZP593 PCIe to 2.5G Ethernet Network Port PCIe to M.2 Key M NVMe SSD Hat Adapter Expansion Board for Raspberry Pi 5 Support M.2 NVMe 2230 2242 2260 2280 SSD
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
This expansion board adds one 2.5GBE network port and one M.2 Key-M interface for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet and M.2 Key-M NVME.
After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
Support M.2 NVMe SSD for expansion and storage, compatible with M.2 KEY-M NVMe SSD in 2230/2242/2260/2280 length. Support boot from SSD, and it needs Raspberry Pi official firmware, which is at least 2024.5.13.
With four M2.5 fixing holes, the concave design on the top of the board is convenient for the operation and use of 40Pin GPIO.
This adapter board is suitable for use with aluminum case. Only for aluminum enclosure, please refer to ZC506 (ASIN: B0F93SQ67G). For ZP593 PCIe Peripheral Board with ZC506 aluminum case, please refer to ZP545 (ASIN: B0F93SQ52B).
26,99 € EN AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Kit de Almacenamiento para Raspberry Pi 4 Modelo B
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
【Script for PWM fan】Refer to: wiki.geekworm.com/X-C1_Software. If the fan does not work in third-party OS, only remove the jumper on 'Fan FS' of X-C1 to let the fan run at full speed
【Wifi description】5G WiFi is stable enough, recommend using Ethernet or 5G WiFi
62,89 € EN AMAZON
KEYESTUDIO
KEYESTUDIO PCIE-M.2NVME SSD Shield para Raspberry Pi 5
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it： New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Tutoriali link-https://bit.ly/4eSOPE7
12,19 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 Pulgadas SATA HDD/SSD Expansion Board Compatible con UASP para Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Solamente (no Incluye Raspberry Pi)
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € EN AMAZON
ZDE
ZDE ZC506 Aluminum Case for Raspberry Pi 5 2GB 4GB 8GB 16GB Support PCIe to 2.5G Ethernet Port M.2 NVMe PoE Hat WIFI7 PCIe Peripheral Board ZP593 ZP595 ZP511 ZP581 ZP590B and Pi 5 Active Cooler
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Compatibility: The enclosure is compatible with the latest Raspberry Pi 5 2GB/4GB/8GB/16GB board, specifically designed for HAT expansion boards with 2.5G Ethernet Port (The two modules for 2.5GBE Ethernet ports are easily detachable). For 2.5G Ethernet Port HAT adapter, please refer to ZP593(ASIN: B0DQ8KZBD1); ZP595(ASIN: B0DQ8BLD6L). It also supports installation of various PCIe to M.2 NVMe SSD expansion boards, PoE HAT shields, and WiFi7 adapter boards.
High-quality Material: Made of lightweight and durable aluminum material, it can offer excellent protection and heat dissipation, protect the Raspberry Pi 5 board from damage, dust and scratches.
Active Cooler Supported: Support installation of official Raspberry Pi 5 active cooler and other third-party cooling fans for heatsink. For active cooler, please refer to ZP536(ASIN: B0DSZYHNF5).
Easy Access to Pi 5: This aluminum case can access all ports of Pi 5, including USB-C power jack, micro HDMI ports, USB ports, Ethernet jack, micro SD card slot, power button, 4-lane MIPI DSI/CSI connectors.
Practical Accessories: Provide 4pcs M2.5x5+5mm spacers and 4pcs M2.5x6mm copper nuts for easy installation and fixation of the Pi 5 and expansion boards. A screwdriver is also provided.
19,99 € EN AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Envío gratis
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0FGPSRQ75)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € EN AMAZON
raspberry pi 5 ssd
ssd raspberry pi 5
raspberry pi 5 ssd sata
raspberry pi 5 16gb ssd
raspberry pi 5 case ssd
hat raspberry pi 5 ssd
raspberry pi 5 ssd hat
raspberry pi 5 ssd kit
nvme ssd raspberry pi 5
raspberry pi 5 with ssd
#1 GANADOR
