Adaptador Ssd Sata Raspberry Pi 5
Los 10 mejores productos de octubre de 2025
Última actualización:
8 de octubre de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 Pulgadas SATA HDD/SSD Expansion Board Compatible con UASP para Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Solamente (no Incluye Raspberry Pi)
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € EN AMAZON
KEYESTUDIO
KEYESTUDIO PCIE-M.2NVME SSD Shield para Raspberry Pi 5
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it： New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Tutoriali link-https://bit.ly/4eSOPE7
20,68 € EN AMAZON
KingData
KingData Cable SATA, SATA a USB adaptador convertidor/conector SATA III Lector de disco duro, compatible con 3,5 y 2,5 pulgadas HDD SSD, USB SATA portátil Raspberry Pi 4 crucial WD Seagate Toshiba
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
[5 Gbps con aceleración UASP]: Admite velocidades de transferencia de datos de hasta 5 Gbps, compatible con USB 2.0/1.1. Este adaptador SATA a USB utiliza tecnología UASP, lo que permite velocidades de lectura y escritura más rápidas en comparación con USB 3.0 convencional cuando todos los dispositivos conectados admiten UASP. 【Nota: La velocidad de transferencia real depende de las capacidades de su dispositivo.】
[Diseño fácil de usar]: Las luces LED integradas actúan como indicadores del estado de trabajo del lector USB SATA externo. Además, el adaptador USB SATA SSD cuenta con un modo de suspensión automático, lo que contribuye a prolongar la vida útil del disco duro.
[Amplia compatibilidad]: Compatible con la mayoría de unidades de disco duro SATA III/II/I de 2,5" y SSD (unidades de estado sólido), así como discos duros de 3,5". Este adaptador funciona a la perfección con dispositivos USB-A, como portátiles, tabletas, computadoras de escritorio, HDTV y enrutadores. Los teléfonos requieren la función OTG (el convertidor de USB-A a interfaz para su teléfono no está incluido). Los discos duros de 3,5" requieren alimentación.
[Sistemas compatibles]: El convertidor de USB-A a SATA es compatible con varios sistemas, como Microsoft Windows 11/10/8/8.1/7/Vista/XP o superior, Mac OS 9, 10, 11 o posterior, Linux, Chrome OS, Android, Harmony OS, etc.
[Aplicaciones versátiles]: Conecte sin esfuerzo su SSD de 2,5" y HDD de 3,5" a un PC, portátil, PS4, TV o router para ampliar el almacenamiento, actualizar sistemas, hacer copias de seguridad de archivos, restaurar y transferir datos. Ideal para arrancar discos duros/SSD antiguos y recuperar archivos importantes de una PC defectuosa. El paquete incluye: 1 x adaptador USB 3.0 a SATA y 1 x adaptador de alimentación.
11,99 € EN AMAZON
Freenove
Freenove Dual M.2 NVMe SSD Hat for Raspberry Pi 5, M.2 Adapter AI Hat 2 Slots NAS Raid Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 MAX Speed 500 MB/s, Detailed Tutorial
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € EN AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0FGPSRQ75)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € EN AMAZON
Coolwell
PCIe to 2-Channel SATA Hat+ Adapter for Raspberry Pi 5, SATA 3.0 Expansion Board with Dual SATA Ports, LED Indicators, EEPROM, Plug and Play, High-Speed HDD/SSD Storage Support
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
✅ High-Speed PCIe to 2-Port SATA 3.0 Adapter for Raspberry Pi 5: This dual-channel PCIe to SATA HAT+ supports SATA 3.0 (6Gbps) for fast and stable HDD/SSD storage, specially designed for Raspberry Pi 5 via 16PIN PCIe interface.
🔌 Plug and Play SATA Expansion Board, Driver-Free Setup: No driver installation needed—this SATA HAT+ adapter is fully plug-and-play on Rasp-berry Pi 5, allowing for quick setup of external storage with zero hassle.
💡 Onboard Dual LED Indicators for Status Monitoring: Features two status LEDs for each SATA port, making it easy to monitor SATA HDD/SSD activity and system operation at a glance.
📦 Integrated EEPROM for HAT ID and Product Info Storage: The onboard EEPROM stores the HAT+ identity and technical details, ensuring compatibility with the Rasp-berry Pi HAT+ standard and auto-recognition on boot.
🛠️ Compact, Reliable SATA Expansion for Raspberry Pi NAS Projects; Perfect for building your own Rasp-berry Pi NAS, media server, or data backup system—this 2-Port SATA PCIe adapter is compact, efficient, and ideal for DIY storage solutions.
25,91 € EN AMAZON
UeeKKoo
Adaptador PCIe a SATA de 2 canales compatible con Raspberry Pi 5, SATA 3.0, indicadores LED duales integrados y EEPROM, HAT + estándar, sin controlador, Plug and Play
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
PCIe TO 2-CH SATA HAT+, compatible con Raspberry Pi 5, sin controlador, plug and play.
Conexión a Pi 5 a través de cable de 16 pines: basado en la interfaz PCIe de 16 pines de Raspberry Pi 5.
Protocolo de disco duro SATA: interfaces SATA de doble canal, cumple con el estándar SATA Gen3.
PCIe a SATA 3.0 de alta velocidad de 2 canales: cumple con los estándares SATA 3.0 (SATA Gen3) y PCIe Gen2.
Indicadores LED duales integrados: fácil de controlar el estado de trabajo. EEPROM integrada: para guardar el ID del sombrero y la información del producto.
Viene con recursos de desarrollo en línea y tutoriales para ayudarte a empezar rápidamente: bit.ly/4nF3h6V
25,91 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
raspberry pi 5 ssd sata
raspberry pi 5 ssd
ssd raspberry pi 5
raspberry pi 5 16gb ssd
adaptador ssd raspberry pi 4
raspberry pi 5 8gb ssd
raspberry pi 5 case ssd
raspberry pi 5 ssd m2
ssd m2 raspberry pi 5
raspberry pi 5 sata
#1 GANADOR
