Nvme Ssd Raspberry Pi 5
Los 10 mejores productos de octubre de 2025
Última actualización:
7 de octubre de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Pimoroni
Pimoroni NVMe Base (M.2 2230, 2242, 2260 y 2280) SSD PCIe para Raspberry Pi 5 (¡hasta 800 MB/s!)
31% Descuento
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
solución perfecta para un servidor de archivos o centro multimedia Raspberry Pi 5
sigue las pautas proporcionadas por Raspberry Pi para garantizar la compatibilidad con el sistema operativo Raspberry Pi
solo para uso con SSD NVMe M.2; ¡no funcionará con discos SATA!
funciona con Raspberry Pi 5 (¡no incluido!)
protege de forma segura su disco NVMe
23,06 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
91
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Geekworm
Geekworm X1015 PCIe to M.2 NVMe SSD Shield Support Hailo-8 AI Accelerator for Raspberry Pi 5
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Compatibilidad: Raspberry Pi 5 NVMe solo compatible con Raspberry Pi 5, modelo: X1015
【Múltiples M2 NVMe SSD soportado】Soporte M.2 KEY-M NVMe SSD 2230/2242/2260/2280 de longitud de instalación. Viene con cable de cobre SSD para instalación SSD 2230/2242/2260.
【 Raspberry Pi 5 AI Hat Extension】 Soporta módulo de aceleración Hailo AI integrado alrededor del chip Hailo-8L del kit Raspberry Pi AI.
【Cómo alimentar】 5 V CC +/-5% de potencia a través del cabezal de pin GPIO y FFC, convertido a 3,3 V máx. 3 A para alimentar el SSD; se recomienda utilizar el adaptador de alimentación Geekworm PD de 27 W (ASIN: B0CP8SRXSC) o (ASIN: B0CZCZF2QV)
Lista de embalaje: 1 placa periférica PCIe X1015, 2 cables FFC PCIe de 40 mm (uno como copia de seguridad), 1 cabezal GPIO, 1 paquete de tornillos (nota: no incluye Raspberry Pi 5, SSD, tarjeta TF o adaptador de alimentación)
Funda a juego (no incluida). Referencia a la funda metálica P579 (ASIN: B0CRB3DT5M), o P579 con refrigerador activo oficial (ASIN: B0CT4P893Q), o P579 con H501 Active Coolr (ASIN: B0D5LCJQZ5)
17,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € EN AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5, Soporte M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD y Pi5 Board no están incluidos)
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
【Compatibilidad】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB board. Nota: Raspberry Pi 5 board no está incluido.
【Soporte M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it support the Installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
【Cómo encender】Utiliza 5 V DC +/-5%, 5 A to power via Raspberry Pi 5 and Pi 5 will power N07 via pogo pins to supplementary power during large data transfer. y los datos se transfieren a través de FFC ribben cable con Raspberry Pi 5 a través de PCIe ranura, recomienda utilizar GeeekPi PD 27W Power Adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Diseño de orificio de ventilación proporciona excelente ventilación de flujo de aire para enfriar y también soporte Raspberry Pi 5 Active Cooler instalación.
【El paquete incluye: 1 x N07 M.2 2280 PCIe to NVMe Bottom; 1 cable personalizado PCIe FFC; 4 x M2,5 x 6 mm copper pillar; 4 x M2,5 x 12 +4 mm de largo copper pillar; 4 x M2,5 x 4 mm plano screw; 2 x M2 x Hard drive copper Pillars and Screeners ws (to fix NVME M.2 SSD)
【Wiki】https://wiki.52pi.com/index.php?title=EP-0211
18,99 € EN AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
39,50 € EN AMAZON
db-tronic
Raspberry Pi 5 8GB PCIe M.2 NVMe - Juego | Caja metálica | Enfriador Activo | Placa PCIe SSD M.2 NVMe | Fuente de alimentación Oficial USB-C 27W | 64 GB Edition | Cable HDMI 4K
Envío gratis
65
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
✔ Raspberry Pi 5 con 8 GB de RAM: Diseñado para obtener el máximo rendimiento en aplicaciones como soluciones de servidor, domótica y multimedia.
✔ Placa PCIe SSD NVMe M.2: conecte y utilice fácilmente el almacenamiento NVMe para una transferencia de datos rápida.
✔ Carcasa metálica: Carcasa robusta que combina protección y refrigeración. El refrigerador activo y el sombrero NVMe encajan perfectamente en el estuche.
✔ Active Cooler oficial: Potente ventilador diseñado específicamente para Raspberry Pi 5 para disipar el calor de manera efectiva.
✔ Fuente de alimentación oficial USB-C 27W: Estabilidad y seguridad en la fuente de alimentación para Raspberry Pi y dispositivos periféricos.
✔ Tarjeta de memoria 64 GB: Solución flexible para instalar un sistema operativo de su elección.
✔ Cable Micro HDMI 4K: listo para una salida de vídeo 4K nítida en monitores o televisores compatibles.
✔ Materiales de sujeción y cable plano: Todo está incluido para una instalación suave y segura.
149,90 € EN AMAZON
nvme raspberry pi 5
raspberry pi 5 nvme
raspberry pi 5 ssd
ssd raspberry pi 5
nvme ssd raspberry pi
raspberry pi nvme ssd
carcasa raspberry pi 5 nvme
raspberry pi 5 16gb nvme
raspberry pi 5 ssd sata
case raspberry pi 5 nvme
#1 GANADOR
