Pi Zero Hat
Los 10 mejores productos de octubre de 2025
Última actualización:
7 de octubre de 2025
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is Not Included)
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po battery recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time.
Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the battery operating status.
28,99 € EN AMAZON
Waveshare
RS485 Can Hat para Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Permitir la Comunicación a Larga Distancia a Través de la Función RS485/CAN
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
19,52 € EN AMAZON
Waveshare
Waveshare USB HUB Hat (B) For Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Envío gratis
94
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
4x extended USB ports, compatible with USB 2.0 / 1.1
Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
13,99 € EN AMAZON
Waveshare
Waveshare 2.15inch e-Paper Hat+ (G), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 296x160, Red/Yellow/Black/White, SPI Interface E-Ink Display with Driver Board
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
25,99 € EN AMAZON
Waveshare
Waveshare 1.44inch LCD Display Hat Compatible with Raspberry Pi Zero Series Boards, 128x128 Pixels Handheld LCD with Embedded Controller, Communicating Via SPI Interface
Envío gratis
87
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface.
Trying to add a control interface for your Pi? Even making the Pi into a handheld game console? This compact display would be the ideal choice.
Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/Zero/Zero W
1x joystick (5-position), 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
17,99 € EN AMAZON
Waveshare
Waveshare SIM7600G-H 4G Hat (B) for Raspberry Pi Supports LTE Cat-4 4G/3G/2G GNSS Positioning Global Band
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
4G HAT FOR RASPBERRY PI,Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning,Based on SIM7600G-H, Global Band
Suitable For Raspberry Pi / PC,Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
Global Band 4G / 3G / 2G Support,Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network
USB HUB Feature,Onboard USB HUB Chip With USB2.0/1.1 Compliant, Providing 2x USB-A Connector And 1x USB Solder Pad
GNSS Positioning,Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Telephoto Call & SMS Support,Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
96,99 € EN AMAZON
Waveshare
Waveshare RS485 Can Hat for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Allows Stable Long Distance Communication
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485
Reserved control pins, allows to work with other control boards
Comes with development resources and manual (examples in wiringPi/python)
19,99 € EN AMAZON
innomaker
InnoMaker DAC Mini Hat PCM5122 - Tarjeta de audio para Raspberry Pi 5/4/3B+/Zero 2W, HiFi Shield 384 kHz/32bit DAC con RCA y salida de 3,5 mm
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Ajuste perfecto para tablas compactas: especialmente diseñado para Raspberry Pi Zero, Zero W, Zero 2 y Zero 2 W, se ajusta perfectamente sin sobrevivir. Totalmente compatible con todos los modelos de 40 pines, incluyendo Pi 5, Pi 4 y 3B+.
Amplia compatibilidad con software: funciona instantáneamente con todos los sistemas de reproductores de música populares como Volumio, Moode, RuneAudio, OSMC, PiCorePlayer y Max2Play, así como con sistemas operativos estándar como Raspberry Pi OS, Debian y Ubuntu.
【Combinación de amplificador y DAC de alto rendimiento】Equipado con PCM5122 DAC de alta resolución de 32 bits/384 kHz para una claridad excepcional y el amplificador de auriculares TPA6133 con salida de 2,1 Vrms para un sonido potente y limpio.
Doble salida dorada: ofrece tanto conectores RCA RCA (izquierda/derecha) como una salida de auriculares de 3,5 mm para conexiones de alta calidad a altavoces, amplificadores o auriculares directamente desde el Raspberry Pi.
Sonido excelente, valor inmejorable: ofrece un nivel de ruido extremadamente bajo y una calidad de sonido de audio que desafía los costosos DAC independientes – una increíble relación calidad-precio para los entusiastas del audio.
28,99 € EN AMAZON
innomaker
InnoMaker Placa de Expansión Audio DAC HiFi Hat para Raspberry Pi 5/4/3B+/Zero | PCM5122 384kHz/32bit con Soporte DOP | Osciladores Duales, Salida RCA/3.5mm (112dB SNR)
Envío gratis
72
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Placa de Expansión DAC HiFi de Conexión Directa】Integración con Raspberry Pi 5/4/3B+/Zero via GPIO 40 pines. Sin soldaduras ni cables externos – audio profesional al 10% del costo. DAC PCM5122 384kHz/32bit con osciladores doble ultra-bajo jitter (45.158MHz/49.152MHz).
【Ingeniería de Audio Clase Referencia】DAC TI PCM5122 (112dB SNR/-78dB THD+N) con salidas RCA/3.5mm acopladas a condensador de película. Modo Master Clock elimina jitter, soporta DSD over PCM (DOP) y 8kHz-384kHz.
【Compatibilidad Universal con OS】Probado con Volumio, Moode, RuneAudio, LibreELEC y Raspberry Pi OS. Transmisión Hi-Res via red/NAS/USB. Configuración plug-and-play mediante EEPROM.
【Interfaz de Doble Salida Profesional】Salidas de línea RCA doradas (2.1Vrms) + amplificador de auriculares dedicado (138mW@32Ω via TPA6133). Tierra independiente contra diafonía para monitores de estudio/auriculares de alta impedancia.
【Diseño Optimizado para Desarrolladores & Soporte】Regulación de potencia ultra-silenciosa + puerto IR reservado (GPIO26). Cumple especificaciones HAT, con SDK open-source, API documentada y soporte via InnoMaker Wiki (enlace en manual).
34,99 € EN AMAZON
Waveshare
Triple LCD Hat para Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B, Pantalla Principal IPS LCD de 1.3 Pulgadas, Pantallas Secundarias IPS LCD de 0.96 Pulgadas, 2X Teclas Definidas por el Usuario
Envío gratis
66
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Triple LCD HAT for Raspberry Pi onboard 1.3inch IPS LCD main screen, with built in ST7789 driver chip, SPI interface communication, supports 65K color display, 240×240 resolution, support clear and vivid color image display, suitable for various application scenarious
Onboard dual 0.96inch LCD secondary screens, with built in ST7735S driver chip, SPI interface communication, supports 65K color display, 160×80 resolution, can be used to display key informations, status indicator messages or small graphics
Onboard 2x user-defined keys for extended applications, supports customizing the key function, easy to use
Onboard standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, easy to integrate
Comes with online Development Resources and Technical Support (Raspberry Pi/VisionFive2/Arduino/STM32, etc.), if you have any question, feel free to contact us
24,49 € EN AMAZON
raspberry pi zero hat
pi zero 2w hat
pi hat
pi zero
raspberry pi zero
banana pi zero
#1 GANADOR
