Pi Hat
Los 10 mejores productos de octubre de 2025
Última actualización:
8 de octubre de 2025
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display Hat, 240x240 Pixels with Embedded Controller, Communicating Via SPI Interface
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
20,99 € EN AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat for Raspberry Pi 5, with Official Raspberry Pi 5 Active Cooler, Support M.2 NVMe SSD 2230 2242 2260 2280
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibilidad】Este kit incluye a P33 M.2 NVME M-Key PoE+ HAT y un oficial Raspberry Pi Active Cooler, especialmente diseñado para el último modelo Raspberry Pi 5, un rendimiento óptimo y compatibilidad.
【Alta velocidad NVMe SSD Support】Los soportes de tabla de HAT M.2 NVMe SSDs para accesos y almacenamiento de datos rápidos.
【M.2 Interface】Utiliza la interfaz PCIe para comunicación de alto rendimiento entre SSD y Raspberry Pi.
【PoE HAT Design】Fácil entrega de energía con alimentación a través de Ethernet, eliminando la necesidad de cables adicionales.
【802.3at PoE Support】Requires a 802.3at PoE switch to provide up to 30W of power, ensuring sufficient power for demanding aplications.
【Máxima entrega de energía】 Capaz de delivering up to 25W at 5,1 V/4,5 A, adecuado para alimentar tanto la Raspberry Pi como el NVMe SSD.
39,99 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Waveshare
Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € EN AMAZON
Waveshare
RS485 Can Hat para Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Permitir la Comunicación a Larga Distancia a Través de la Función RS485/CAN
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
19,52 € EN AMAZON
Waveshare
Waveshare Game Hat for Raspberry Pi A+/B+/2B/3B/3B+/4B 3.5inch IPS Screen 480 * 320 Resolution 60 Frame Experience Make Your Own Game Console
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Note：This product can support the recalbox now as we updated the image in our wiki.Please check our wiki to download the image for recalbox. This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.
3.5inch IPS screen, 480×320 resolution 60 frame experience, smoothly display, no more frame loss
Compatible with Raspberry Pi A+/B+/2B/3B/3B+/4B (Raspberry Pi Zero/Zero W/Zero WH requires another HDMI cable)
Integrates battery charge circuitry, powered from a 18650 lithium battery (NOT included), plays anywhere anytime.Please focus on the direction of battery, if you reversely connecting the battery, the charging circuit will be damaged, so please pay attention to it when you mounting the battery.
Battery capacity indicator Onboard speaker and earphone jack, listen to the familiar BGM from the old days
55,99 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Carcasa de Aluminio Con Ventilador y Disipador - Compatible Con Modelo B y PoE Hat
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
15,99 € EN AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is Not Included)
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po battery recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time.
Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the battery operating status.
28,99 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 PoE Hat Aislado Compatible con el estándar IEEE 802.3af o 802.3at PoE, con Raspberry Pi Ventilador 30x30x7mm y Disipador para Raspberry Pi 4 Modelo B / 3B + 3B Plus
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Estándar: IEEE 802.3af-2003 PoE
Voltaje de entrada: 37 ~ 57 V CC, dispositivo de clase 2; Voltaje de salida: 5 V CC / 2,5 A
Enfriamiento: ventilador sin escobillas de 30 mm x 30 mm con 4 sombreretes
Fuente de alimentación en modo conmutado completamente aislada
Soporte tecnológico: https: //wiki.52pi.com/index.php/RPi_Isolated_PoE_Hat_SKU: _EP-0127
21,99 € EN AMAZON
Raspberry Pi
Raspberry Pi POE+ SOMBRERO
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
El Raspberry Pi PoE+ HAT es un accesorio Power Over Ethernet (PoE+) para Raspberry Pi 3B+/4B.
En comparación con su predecesor Raspberry Pi PoE HAT, cuenta con un mejor efecto de enfriamiento, implementando el estándar 802.3af/en con 5V DC/4A de salida de potencia más grande, proporcionando suficiente energía tanto para Raspberry Pi 3B+/4B a carga máxima como para otros periféricos al mismo tiempo.
Ventilador integrado sin escobillas de 25 x 25 mm que ofrece 2.2 CFM para una mejor disipación del calor
Fuente de alimentación de modo conmutado totalmente aislada para una mejor eficiencia energética
Proporciona conexión de red y fuente de alimentación para tu Raspberry Pi en un solo cable
40,99 € EN AMAZON
pi zero hat
pi poe hat
poe hat pi
pi hat midi
hat raspberry pi
raspberry pi hat
raspberry pi 3 hat
pi 4 poe hat
#1 GANADOR
