main logo

E-ink Display

Los 10 mejores productos de mayo de 2025
Última actualización: 23 de mayo de 2025
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating Via SPI Interface
Envío gratis
star

99

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € EN AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 7.3-Inch e-Paper Hat (F), 7-Color e-Ink Screen with PCB, 800x480 Pixels, Low Power Consumption - for Raspberry Pi/Jetson Nano/STM32, Suitable for Electronic Shelf Labels, Meeting Badges, etc
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#2

  • Advanced Color ePaper technology with an ACeP seven-color display and a resolution of 800x480
  • Low power consumption with minimal power usage during refresh and long-lasting display in case of a power outage
  • SPI Control interface compatible with Raspberry Pi/Jetson Nano/STM32, and other control boards
  • Onboard level shifting chip supporting 3.3V and 5V interfaces, adding to its versatility
  • Compatible with usage in applications such as electronic shelf labels, pricing tags, meeting badges, and more
  • 87,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 4.2Inch E-Paper Display Panel Module Kit 400 x 300 Resolution 3.3v E-Ink Electronic PaperScreen,Embedded Controller for Raspberry Pi/Arduino/Nucleo Support Full Refresh SPI Interface
Envío gratis
star

93

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 43,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
star

92

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#4

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 69,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Hat Display Module, 800×480 Resolution, Supports Black/White 2 Colors, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Envío gratis
star

83

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 69,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Raw Display Panel (B) 800x480 Resolution E-Ink Electronic Paper Screen Without PCB Support Red Black and White Three-Color and White SPI Interface
Envío gratis
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • INTERFACE:3-wire SPI, 4-wire SPI; OUTLINE DIMENSIONS:170.2 × 111.2 × 1.18mm; FULL REFRESH TIME:26s; DISPLAY SIZE:163.2 × 97.92mm ; DOT PITCH:0.205 × 0.204mm; VIEWING ANGLE:>170°.
  • Low power consumption, basically power is only required for refreshing.Wide viewing angle, paper-Like displaying without electricity
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags,industrial instruments.
  • E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
  • E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
  • 65,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
Envío gratis
star

79

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 36,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Envío gratis
star

76

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • V4 Latest Version Ink display, This is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!
  • No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo.
  • Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Envío gratis
star

72

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € EN AMAZON
Binghe
Binghe
2.13" E-Ink Lora Display Binghe 2.13" E-Ink Lora Display con ESP32-S3 Lora Placa de Desarrollo con Placa acrílica/Cable de batería/Antena Soporte WIFILORA Bluetooth Compatible con Arduino
Envío gratis
star

69

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • 【Tecnología de núcleo y versatilidad】: ESP32-S3 LoRa módulo integrado con ESP32-S3FN8 y 1262 chips, soporta WiFi, LoRa, y Bluetooth para opciones de desarrollo flexible.Compatible con meshtastick.
  • 【Pantalla de alta calidad】: ESP32-S3 LoRa con pantalla de 250x122 píxeles en blanco y negro con alto contraste, alta reflectividad, y ultra-amplio ángulo de visión para una visibilidad clara en diversas condiciones de iluminación.
  • 【Diseño de bajo consumo de energía】: La placa ESP32-S3 LoRa con pantalla E-Ink de 2,13» admite alimentación por USB y batería de litio, con una duración de la pantalla de más de 180 días después de apagarla.
  • 【Compatible con múltiples fuentes de alimentación】: 2,13 E-ink ESP32-S3 LoRa admite interfaces Tipo-C y de batería de litio con un rango de voltaje de 3-5V, lo que garantiza una alimentación estable en diversos entornos.
  • 【Función de actualización incorporada】: 2.13 elik blanco y negro equipado con una función de actualización parcial de pantalla incorporada, lo que permite actualizaciones rápidas con tiempo y energía reducidos para la actualización completa.
  • 28,99 € EN AMAZON
e ink display e ink e-ink e-ink display 32 e ink display raspberry pi color e ink e-ink color e-ink reader e ink watch e-ink watch