E Ink Display Raspberry Pi
Los 10 mejores productos de mayo de 2025
Última actualización:
25 de mayo de 2025
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
69,99 € EN AMAZON
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
24,99 € EN AMAZON
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
Envío gratis
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
Comes with development resources and manual (examples for Raspberry Pi)
36,99 € EN AMAZON
Waveshare
Waveshare 2.13 Inch E-Paper Raw Display V4 Panel 250x122 E-Ink Electronic Paper Screen Without PCB, Embedded Controller Partial Refresh SPI Interface, for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Note:V4 Version,please use corresponding demo code in wiki.This is an E-Ink raw display, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
13,99 € EN AMAZON
Waveshare
Waveshare 4.2Inch E-Paper Display Panel Module Kit 400 x 300 Resolution 3.3v E-Ink Electronic PaperScreen,Embedded Controller for Raspberry Pi/Arduino/Nucleo Support Full Refresh SPI Interface
Envío gratis
86
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
43,99 € EN AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
V4 Latest Version.Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,,but incompatible with Netatmo
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € EN AMAZON
Waveshare
Waveshare 9.7 Inch E-Ink Display Hat for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ E-Paper Screen with 1200x825 Resolution IT8951 Controller USB/SPI/I80 Interface
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
No backlight, keeps displaying last content for a long time even when power down
Low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
189,99 € EN AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
V4 Latest Version Ink display, This is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh.
Note:Please check the version of display and use the corresponding demo code in wiki!!!
No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing
Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo.
Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.
20,99 € EN AMAZON
LUCKFOX
LUCKFOX 7.3-Inch e-Paper Hat (F), 7-Color e-Ink Screen with PCB, 800x480 Pixels, Low Power Consumption - for Raspberry Pi/Jetson Nano/STM32, Suitable for Electronic Shelf Labels, Meeting Badges, etc
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Advanced Color ePaper technology with an ACeP seven-color display and a resolution of 800x480
Low power consumption with minimal power usage during refresh and long-lasting display in case of a power outage
SPI Control interface compatible with Raspberry Pi/Jetson Nano/STM32, and other control boards
Onboard level shifting chip supporting 3.3V and 5V interfaces, adding to its versatility
Compatible with usage in applications such as electronic shelf labels, pricing tags, meeting badges, and more
87,99 € EN AMAZON
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) V2,296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
68
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
29,99 € EN AMAZON
display raspberry pi
raspberry pi display
e ink display
e-ink display
#1 GANADOR
