Waveshare Raspberry Pi
Los 10 mejores productos de octubre de 2025
Última actualización:
8 de octubre de 2025
Waveshare
Waveshare Raspberry Pi Power Relay Board Raspberry Pi Expansion Board Module for Raspberry Pi A+/B+/2B/3B
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Supports Raspberry Pi A+/B+/2B/3B/3B+ High quality relays, loads up to 5A 250V AC or 5A 30V DC
High quality relays, loads up to 5A 250V AC or 5A 30V DC
Photo coupling isolation, prevent interference from high voltage circuit
Onboard LEDs for indicating relays status
Relay control jumper, allows to control the relays by custom pins other than the default pins;Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835
19,99 € EN AMAZON
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display Hat, 240x240 Pixels with Embedded Controller, Communicating Via SPI Interface
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
20,99 € EN AMAZON
Waveshare
Waveshare Raspberry Pi 8-ch Relays Expansion Board Control High Voltage Products Standard Rail Mount Bottom Case
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Supports Raspberry Pi A+/B+/2B/3B/3B+ High quality relays, loads up to 5A 250V AC or 5A 30V DC
Photo coupling isolation, prevent interference from high voltage circuit Standard rail mount bottom case
Onboard LEDs for indicating relays status Relay control pin selection jumper, allows to control the relays by custom pins other than the default pins
Reserved control Interface, allows to work with controllers like PLC
Comes with development resources, including examples in wiringPi, bcm2835, python, python-bottle (webpage control), and crontab (cron job)
32,99 € EN AMAZON
Waveshare
Waveshare PoE Power Over Ethernet Hat (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € EN AMAZON
Waveshare
Waveshare Game Hat for Raspberry Pi A+/B+/2B/3B/3B+/4B 3.5inch IPS Screen 480 * 320 Resolution 60 Frame Experience Make Your Own Game Console
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Note：This product can support the recalbox now as we updated the image in our wiki.Please check our wiki to download the image for recalbox. This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.
3.5inch IPS screen, 480×320 resolution 60 frame experience, smoothly display, no more frame loss
Compatible with Raspberry Pi A+/B+/2B/3B/3B+/4B (Raspberry Pi Zero/Zero W/Zero WH requires another HDMI cable)
Integrates battery charge circuitry, powered from a 18650 lithium battery (NOT included), plays anywhere anytime.Please focus on the direction of battery, if you reversely connecting the battery, the charging circuit will be damaged, so please pay attention to it when you mounting the battery.
Battery capacity indicator Onboard speaker and earphone jack, listen to the familiar BGM from the old days
55,99 € EN AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
V4 Latest Version.Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,,but incompatible with Netatmo
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € EN AMAZON
Waveshare
Waveshare Micro HDMI To HDMI Multifunctional Adapter, Compatible with Raspberry Pi 5 / 4B, Two Power Supply Methods, Supports Dual 4K Outputs
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Micro HDMI To HDMI Adapter Board, compatible with Raspberry Pi 5 & Pi 4B, Dual 4K Outputs
Easy To Connect The HDMI Screens: Converts Micro HDMI Interfaces To HDMI Female Ports For Easier Connection
Two Power Supply Methods: Supports Power Supply Via Type-C Port Or Screw Terminal
12,99 € EN AMAZON
Waveshare
Waveshare PoE Hat (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/At Network Standard, Power Over Ethernet Hat (G), Suitable for RPi 5 Official Case
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability，IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € EN AMAZON
Waveshare
RS485 Can Hat para Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Permitir la Comunicación a Larga Distancia a Través de la Función RS485/CAN
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
19,52 € EN AMAZON
Waveshare
Waveshare 4.3inch Capacitive Touch Display for Raspberry Pi with Protection Case 800×480 Resolution IPS Wide Angle MIPI DSI Interface,Compatible with Raspberry Pi 4 Only
Envío gratis
68
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Note：The case can compatible with Raspberry Pi4B only,other Raspberry pi models can choose the version not include the case. Supports Raspberry pi, 5-points touch, driver free.
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
Supports Retropie, driver free. Supports Pi 4B/3B+/3B.
Raspberry Pi is NOT included.
The case is 3D-printed, so you may feel the surfaces is a little bit rough, please make sure you don't mind it before purchasing.
49,99 € EN AMAZON
waveshare raspberry pi 5
waveshare raspberry
raspberry pi
cargador raspberry pi
alternativa raspberry pi
carcasa raspberry pi
pack raspberry pi
raspberry pi 16gb
raspberry pi carcasa
raspberry pi hole
#1 GANADOR
