main logo

Waveshare Raspberry

Los 10 mejores productos de julio de 2025
Última actualización: 13 de julio de 2025
Waveshare
Waveshare
Waveshare Game Hat for Raspberry Pi A+/B+/2B/3B/3B+/4B 3.5inch IPS Screen 480 * 320 Resolution 60 Frame Experience Make Your Own Game Console
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Note：This product can support the recalbox now as we updated the image in our wiki.Please check our wiki to download the image for recalbox. This Game HAT will turn your Raspberry Pi into a classic game console in a second, recalls you all the gaming pleasures in the memory.
  • 3.5inch IPS screen, 480×320 resolution 60 frame experience, smoothly display, no more frame loss
  • Compatible with Raspberry Pi A+/B+/2B/3B/3B+/4B (Raspberry Pi Zero/Zero W/Zero WH requires another HDMI cable)
  • Integrates battery charge circuitry, powered from a 18650 lithium battery (NOT included), plays anywhere anytime.Please focus on the direction of battery, if you reversely connecting the battery, the charging circuit will be damaged, so please pay attention to it when you mounting the battery.
  • Battery capacity indicator Onboard speaker and earphone jack, listen to the familiar BGM from the old days
  • 55,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display Hat, 240x240 Pixels with Embedded Controller, Communicating Via SPI Interface
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#2

  • Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
  • This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi)
  • Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Micro HDMI To Female HDMI Adapter Board Compatible with Raspberry Pi 5/4 B,Supports Dual 4K Outputs,Two Power Supply Methods
Envío gratis
star

93

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • Micro HDMI To HDMI Adapter Board,Supports Raspberry Pi 5 & Raspberry Pi 4B
  • Dual 4K Outputs
  • Easy To Connect The HDMI Screens,Converts Micro HDMI Interfaces To HDMI Female Ports For Easier Connection
  • Two Power Supply Methods,Supports Power Supply Via Type-C Port Or Screw Terminal
  • 12,49 € EN AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 3.5inch RPi LCD (C) Resistive Touch Screen TFT 480x320 Resolution 125MHz High-Speed SPI for All Version of Raspberry Pi Raspberry Pi 4
Envío gratis
star

91

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • 480x320 hardware resolution;Resistive touch control;Supports any revision of Raspberry Pi (directly-pluggable)
  • 125MHz High-Speed SPI signal transmission, clear & stable display effect Drivers provided (works with your own Raspbian/Ubuntu/Kali directly)
  • Supports FBCP software driver as well, it is possible to config software resolution and dual-screen display
  • Combined with the 50Hz refresh rate Raspberry Pi, allows you to: Watch videos (multi formats like MP4) Play video games (RetroPie, take a bite)
  • Take photos by touching (up to 17 camera modes) Support software keyboard (system interaction without keyboard/mouse)
  • 33,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 4.3inch HDMI LCD (B) 800x480 IPS Capacitive Touch Screen Monitor Display for Raspberry Pi BB Black Banana Pi Raspberry Pi 4
Envío gratis
star

83

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • 4.3inch,HDMI interface, 800x480, IPS, capacitive touch LCD,Supports Multi mini-PCs, Multi Systems
  • Supports popular mini PCs such as Raspberry Pi, Jetson Nano,BB Black, Banana Pi, as well as general desktop computers
  • When works with Raspberry Pi,such as RPi3 B,Raspberry Pi 3 Model A+ or Model B+ , supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
  • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, speaker connector, supports HDMI audio output
  • 59,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Micro HDMI To HDMI Multifunctional Adapter, Compatible with Raspberry Pi 5 / 4B, Two Power Supply Methods, Supports Dual 4K Outputs
Envío gratis
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • Micro HDMI To HDMI Adapter Board, compatible with Raspberry Pi 5 & Pi 4B, Dual 4K Outputs
  • Easy To Connect The HDMI Screens: Converts Micro HDMI Interfaces To HDMI Female Ports For Easier Connection
  • Two Power Supply Methods: Supports Power Supply Via Type-C Port Or Screw Terminal
  • 12,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Ethernet/USB HUB Hat (B) for Raspberry Pi Series 1x RJ45 Ethernet Port 3X USB 2.0 Ports
Envío gratis
star

79

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • The ETH/USB HUB HAT (B) is an Ethernet and USB HUB designed for Raspberry Pi, providing 1x RJ45 Ethernet port and 3x USB 2.0 ports.
  • It's pogo pin design is specialized for Zero series, while the onboard normal USB connector can be used to connect with other Raspberry Pi boards through a USB cable.
  • Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
  • Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
  • USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
  • 21,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 4.3inch LCD Capacitive Touch Display for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+ 800×480 IPS Wide Angle MIPI DSI Interface Screen
Envío gratis
star

77

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • Supports Raspbian, 5-points touch, driver free.
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
  • Supports Retropie, driver free.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+ (CM3/3+ requires extra adapter board).
  • up to 5-points touch, depending on the operating system.
  • 44,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Envío gratis
star

71

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
star

65

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 69,99 € EN AMAZON
waveshare raspberry pi waveshare waveshare raspberry pi 5