Waveshare E-ink
Los 10 mejores productos de julio de 2025
Última actualización:
12 de julio de 2025
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
69,99 € EN AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
V4 Latest Version.Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,,but incompatible with Netatmo
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € EN AMAZON
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
24,99 € EN AMAZON
Waveshare
Waveshare 4.2Inch E-Paper Display Panel Module Kit 400 x 300 Resolution 3.3v E-Ink Electronic PaperScreen,Embedded Controller for Raspberry Pi/Arduino/Nucleo Support Full Refresh SPI Interface
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
43,99 € EN AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating Via SPI Interface
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
67,99 € EN AMAZON
Waveshare
Waveshare V4 2.13inch E-Paper Hat+ for Raspberry Pi 5 /for Raspberry Pi Zero 2 W/for Raspberry Pi 3 B/for Raspberry Pi 4B /for Pi Pico W, 250x122, SPI, Hat+ Standard E-Ink Display for pwnagotchi Kit
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect
With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws
Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving
Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial
27,99 € EN AMAZON
Waveshare
Waveshare 2.13inch E-Paper Display Hat V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 Latest Version 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. But incompatible with Netatmo.Onboard voltage translator, for 3.3V/5V MCUs.
Note:Please check the version of display and use the corresponding demo code in wiki!!!Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
20,99 € EN AMAZON
Waveshare
Waveshare 7.3 Inch ACeP 7-Colour E-Paper with Solid Wood Photo Frame, Ultra-Long Standby, 800 x 480 Resolution, Suitable for Content Displays, Calendars, Paintings,Posters, Batteries Are Not Included
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Advanced Color ePaper (ACeP) technology, supports 7-Color display
Ultra-low power consumption, basically power is only required for refreshing
Onboard power saving circuit, allows thousand times of refreshing by one charge
Onboard RTC chip for timing refresh. Simple solid wood photo frame, elegant and beautiful
Rotatable stand and hook hanger on the back, not limited to usage scenarios. Open source code, more freedom to customize functions
103,99 € EN AMAZON
Waveshare
Waveshare 2.13 Inch E-Paper Raw Display V4 Panel 250x122 E-Ink Electronic Paper Screen Without PCB, Embedded Controller Partial Refresh SPI Interface, for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Note:V4 Version,please use corresponding demo code in wiki.This is an E-Ink raw display, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
7,99 € EN AMAZON
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) V2,296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
65
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
29,99 € EN AMAZON
waveshare e ink
waveshare e-ink esp32
e ink
e-ink
telefono e ink
e ink notebook
e ink display
e-ink display
movil e ink
movil e-ink
#1 GANADOR
