Ssd 240gb M2 Para Raspberry Pi 5
Los 10 mejores productos de octubre de 2025
Última actualización:
7 de octubre de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
37,95 € EN AMAZON
KEYESTUDIO
KEYESTUDIO PCIE-M.2NVME SSD Shield para Raspberry Pi 5
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it： New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Tutoriali link-https://bit.ly/4eSOPE7
20,68 € EN AMAZON
Raspberry Pi
Raspberry Pi SSD 256 Go
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Factor de forma M.2 2230
Cumple con el estándar PCIe Gen 3
Interfaz de registro NVMe 1.4 y conjunto de comandos
Requiere un adaptador M.2 compatible con Raspberry Pi 5, como el Raspberry Pi M.2 HAT+ (se vende por separado).
NVMe de 256 GB – 40 K IOPS (lecturas aleatorias de 4 kB), 70 K IOPS (escrituras aleatorias de 4 kB)
NVMe de 512 GB – 50 K IOPS (lecturas aleatorias de 4 kB), 90 K IOPS (4 kB escrituras aleatorias)
47,00 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
86
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
Geekworm
Geekworm X1015 PCIe to M.2 NVMe SSD Shield Support Hailo-8 AI Accelerator for Raspberry Pi 5
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Compatibilidad: Raspberry Pi 5 NVMe solo compatible con Raspberry Pi 5, modelo: X1015
【Múltiples M2 NVMe SSD soportado】Soporte M.2 KEY-M NVMe SSD 2230/2242/2260/2280 de longitud de instalación. Viene con cable de cobre SSD para instalación SSD 2230/2242/2260.
【 Raspberry Pi 5 AI Hat Extension】 Soporta módulo de aceleración Hailo AI integrado alrededor del chip Hailo-8L del kit Raspberry Pi AI.
【Cómo alimentar】 5 V CC +/-5% de potencia a través del cabezal de pin GPIO y FFC, convertido a 3,3 V máx. 3 A para alimentar el SSD; se recomienda utilizar el adaptador de alimentación Geekworm PD de 27 W (ASIN: B0CP8SRXSC) o (ASIN: B0CZCZF2QV)
Lista de embalaje: 1 placa periférica PCIe X1015, 2 cables FFC PCIe de 40 mm (uno como copia de seguridad), 1 cabezal GPIO, 1 paquete de tornillos (nota: no incluye Raspberry Pi 5, SSD, tarjeta TF o adaptador de alimentación)
Funda a juego (no incluida). Referencia a la funda metálica P579 (ASIN: B0CRB3DT5M), o P579 con refrigerador activo oficial (ASIN: B0CT4P893Q), o P579 con H501 Active Coolr (ASIN: B0D5LCJQZ5)
17,00 € EN AMAZON
Patriot Memory
Patriot P310 M.2 PCIe Gen 3 x4 240GB SSD de bajo Consumo - P310P240GM28
Envío gratis
72
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Controlador de última generación; 2280 M.2 PCIe de 3.ª generación x4, NVMe 1.3;2280 M.2 PCIe Gen3 x 4, NVMe 1.3
Protección de ruta de datos integrada extremo a extremo, tecnología SmartECC, y tecnología de estrangulamiento térmico
Soporta “Verificacion de paridad de baja densidad” LDPC para corregir errores durante la lectura para asegurar la integridad de los datos y la tecnologia NANDX- ECC para extender la vida util del NAND Flash
Rendimiento de lectura SEQ de hasta 1700MB/s, y escritura de hasta 1000MB/s; 4K Aligned Random Write: Hasta 280K IOPs
3 años de garantia
22,99 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
65
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € EN AMAZON
ssd para raspberry pi 5
raspberry pi 5 ssd m2
ssd m2 raspberry pi 5
raspberry pi 5 ssd
ssd raspberry pi 5
raspberry pi 5 16gb ssd
raspberry pi 5 ssd sata
raspberry pi 5 with ssd
raspberry pi 5 case ssd
hat raspberry pi 5 ssd
#1 GANADOR
