Raspberry Ups
Los 10 mejores productos de julio de 2025
Última actualización:
12 de julio de 2025
Waveshare
Waveshare Uninterruptible Power Supply UPS Hat Compatible with Raspberry Pi,Stable 5V Power Output Multi Battery Protection Circuits
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 2.5A continuous output current.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
31,99 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (MAX 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € EN AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
94
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,00 € EN AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi Pico/Pico W UPS Power Supply Uninterruptible UPS Hat, Power Bank Power Management Expansion Board for Raspberry Pi Pico/Pico W
Envío gratis
87
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Esta es una fuente de alimentación portátil para Raspberry Pi Pico;Plug & Play
Solo es compatible con la batería de litio 18650
La potencia restante de la batería se puede leer a partir de los 4 indicadores LED. También puede leer la información de voltaje y corriente de la batería conectando el cable USB a TTL a los pines del puerto serie del inversor.
El indicador de carga durante la carga es muy intuitivo, y cuando la batería está completamente cargada, deja de cargarse y el indicador de espera en el panel se enciende.
Todos los GPIO están a la cabeza y proporcionan serigrafías claras que son muy convenientes para los experimentos Pico.
Contenido del paquete: 1 UPS para Raspberry Pi Pico
12,99 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € EN AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is Not Included)
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po battery recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time.
Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the battery operating status.
28,99 € EN AMAZON
Waveshare
Waveshare UPS Hat (D) for Raspberry Pi, Supports 21700 Li Battery (Not Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output At The Same Time
Envío gratis
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Onboard Li battery charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
Onboard LED indicators for monitoring the battery operating status. Supports displaying battery level on the system, easy to check the battery remaining capacity
Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
35,99 € EN AMAZON
PI PISUGAR
Pisugar 3 portátil 1200 mAh UPS batería de litio Pwnagotchi Power Module for Raspberry Pi-Zero W/WH Model Accessories handhold (no incluye Raspberry Pi)
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
PiSugar 3 agrega una función de watchdog de software. Cuando la función se vuelve a encender, el perro necesita ser golpeado regularmente, lo que puede prevenir eficazmente la Raspberry Pi del choque e improve la reliabilidad del sistema.
PiSugar 3 provides hardware battery protection like never before, limiting battery voltage to nearly 80%. Cuando la protección de carga se turned on, los ciclos de batería pueden improved.Set up quad-overvoltage protection function, overcurrent protection function and undervoltage protection function to sure the safety of the Raspberry Pi, PiSugar as well as the Lithium battery.
PiSugar 3 continues to use el pogo pin design to connect with Raspberry Pi from the back. En este camino, no ocupa el GPIO, y es compatible con otros dispositivos GPIO.
PiSugar 3 tiene funciones completas de UPS y puede configurar múltiples métodos para conocer varias necesidades de proyecto.
PiSugar 3 comunicados con la Raspberry Pi a través de la interfaz I2C y es compatible con dispositivos I2C. En adición, la dirección de comunicación I2C se puede personalizar para evitar conflictos de direcciones I2C.
49,33 € EN AMAZON
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
64
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
57,89 € EN AMAZON
raspberry pi ups
ups raspberry pi
ups
raspberry pi ups hat
ups para raspberry pi
#1 GANADOR
