Raspberry Pi Ups Hat
Los 10 mejores productos de julio de 2025
Última actualización:
12 de julio de 2025
Waveshare
Waveshare Uninterruptible Power Supply UPS Hat Compatible with Raspberry Pi,Stable 5V Power Output Multi Battery Protection Circuits
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 2.5A continuous output current.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
31,99 € EN AMAZON
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € EN AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € EN AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is Not Included)
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Power Your Pi Zero Seamlessly From Power Connection OR The Backup Batteries. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po battery recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time.
Multi battery protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the battery operating status.
28,99 € EN AMAZON
Waveshare
Waveshare UPS Hat (D) for Raspberry Pi, Supports 21700 Li Battery (Not Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output At The Same Time
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Onboard Li battery charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
Onboard LED indicators for monitoring the battery operating status. Supports displaying battery level on the system, easy to check the battery remaining capacity
Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
35,99 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi Pico/Pico W UPS Power Supply Uninterruptible UPS Hat, Power Bank Power Management Expansion Board for Raspberry Pi Pico/Pico W
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Esta es una fuente de alimentación portátil para Raspberry Pi Pico;Plug & Play
Solo es compatible con la batería de litio 18650
La potencia restante de la batería se puede leer a partir de los 4 indicadores LED. También puede leer la información de voltaje y corriente de la batería conectando el cable USB a TTL a los pines del puerto serie del inversor.
El indicador de carga durante la carga es muy intuitivo, y cuando la batería está completamente cargada, deja de cargarse y el indicador de espera en el panel se enciende.
Todos los GPIO están a la cabeza y proporcionan serigrafías claras que son muy convenientes para los experimentos Pico.
Contenido del paquete: 1 UPS para Raspberry Pi Pico
12,99 € EN AMAZON
DFRobot
DFRobot Raspberry Pi UPS HAT, DFR0494 – Negro, Compacto, UPS para aplicaciones Raspberry Pi
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
DFRobot Raspberry Pi UPS HAT, DFR0494
Interfaz de expansión estándar Raspberry Pi, compatible con otras tarjetas de expansión
Admite salida de corriente máxima de 2 A, adecuado para más aplicaciones de pi de frambuesa
Cambio automático de la ruta de carga y carga contra apagado
La batería de litio de 3,7 V no está incluida en el envío
25,90 € EN AMAZON
MakerHawk
MakerHawk Raspberry Pi UPS fuente de alimentación ininterrumpida UPS HAT 18650 cargador de batería Power Bank Power Management Expansion Board 5V para Raspberry Pi 4 Modelo B / 3B + / 3B
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
[Uso y nota] Este producto pertenece al dispositivo de fuente de alimentación. Mantener fuera del alcance de los niños. Por favor, consulte estrictamente las instrucciones para el producto UPS, instale la batería primero, luego conecte el UPS al Raspberry Pi. No invierta la batería. Si la polaridad de la batería se invierte, se quemará directamente el chip de gestión de energía del dispositivo. No agregue ningún componente por usted mismo.
[Pantalla de alimentación LED] Puede utilizar la mayoría de las baterías 18650 y cumplir plenamente con las características de la batería en términos de duración de la batería. La luz LED iluminada puede mostrar rápidamente la potencia de permanencia y apoyar la descarga mientras se carga. Puede conectarse directamente a la fuente de alimentación externa para la carga. Al mismo tiempo, la Raspberry Pi no se apagará.
[Protección múltiple] Soporta sobrecorriente, sobretensión, protección contra cortocircuitos; sobretensión de entrada, sobrecarga, sobredescarga, descarga de sobrecorriente y protección contra sobrecalentamiento de la máquina. Seguro y fiable.
[Paquete] 1* Raspberry Pi UPS; 4* M2.5* palo de cobre; 4* M2.5* tornillos de cobre largo; 4* M2.5* tuercas M2.5; 1* Escudo acrílico; 1* Instrucciones [100% garantía de satisfacción] Siempre tenemos en cuenta que su satisfacción es nuestra prioridad. Por cualquier razón no está satisfecho con nuestro producto en cualquier momento, simplemente siéntase libre de contacto para el intercambio o reembolso. Haga clic en Innovateking-EU y luego haga una pregunta para ponerse en contacto con nosotros.
[Diseño inteligente] UPS para Raspberry PI 4B / 3B + / 3B. Gestión de rutas de alimentación integrada, soporte de carga lateral, función de compensación de línea de alta corriente. Hay dos salidas de alimentación de puerto USB A, y también añade salida tipo C. Proporciona una potencia ininterrumpida para el Raspberry Pi para hacer que tu Raspberry Pi siga funcionando mientras se mueve, y su diseño es tan inteligente que puedes deshacerte de los problemas de un cable masivo.
106,50 € EN AMAZON
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
57,89 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-Compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € EN AMAZON
raspberry pi ups
ups raspberry pi
hat raspberry pi
raspberry pi hat
raspberry pi 3 hat
ups raspberry pi 4
raspberry pi hat sata
raspberry pi sata hat
ups raspberry pi 5
raspberry pi hat m2