Raspberry Shield
Los 10 mejores productos de julio de 2025
Última actualización:
11 de julio de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
KEYESTUDIO
KEYESTUDIO PCIE-M.2NVME SSD Shield para Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it： New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Tutoriali link-https://bit.ly/4eSOPE7
14,57 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 Active Cooler, refer to ASIN: B0D5LCJQZ5
12,96 € EN AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield Hat with Pin Header, GPIO Status LED
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € EN AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi Pico 1 2 W H WH, Terminal Block Shield Hat with Pin Header, GPIO Status LED
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Compatible Models: Raspberry Pi Pico / Pico H / Pico W / Pico WH / Pico 2 / Pico 2 W (NOT included in this kit)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi Pico, 2.54 mm (0.1 inch) pitch
Pin Name: The name of each Pin is printed next to it
14,95 € EN AMAZON
KEYESTUDIO
Raspberry Pi Módulo de Placa Relé De DC/AC 4 Canales 5V KEYESTUDIO Relay Shield para Raspberry Pi 2/3/4/4B
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
🍓Este escudo utiliza relé SONGLE, proporcionando entrada y salida de 4 canales. Funciona con Raspberry Pi A+/B+/Pi 2 Modelo B/Pi 3 Modelo B
🍓Todos los canales pueden controlar hasta 24 V CC o 250 V CA en 10 A
🍓Incluye paquete de instalación, código fuente y guía de inicio rápido PDF. 【Descarga tutorial:】👉 https://fs.keyestudio.com/KS0212
🍓Con pruebas funcionales, pruebas de voltaje y corriente, todas nuestras tablas están totalmente calificadas antes de la venta
🍓Adopta materias primas respetuosas con el medio ambiente, ha pasado la certificación FCC de los Estados Unidos y la certificación CE de la UE
12,99 € EN AMAZON
GeeekPi
GeeekPi FFC - Set de 16 pines para Raspberry Pi 5 PCIe to NVMe SSD Shield (40 mm, 60 mm, 80 mm, longitud: 80 mm)
Envío gratis
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
GeeekPi FFC - Set de 16 pines para Raspberry Pi 5 PCIe to NVMe SSD Shield (40 mm, 60 mm, 80 mm, longitud: 80 mm)
8,99 € EN AMAZON
VooGenzek
VooGenzek 18650 Battery Shield ESP32 3V/1A 5V/2A, Micro USB Tipo-B & Tipo-C Puerto, con Cable USB, Compatible con Arduino, Raspberry Pi, Wemos
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Nota: Para utilizarlo, toque primero el interruptor de botón blanco. Cuando el interruptor de modo se conmuta a NOMAL, se detendrá automáticamente durante unos 10 segundos y pasará al modo de espera. Cuando el interruptor de modo está en HOLD, permanecerá encendido independientemente de la situación hasta que se agote la batería.
El paquete incluye: este producto es para batería 18650, pero no incluye batería 18650. El kit incluye 18650 Battery Shield y un cable de puerto USB tipo B.
Protección de la batería: Equipado con un circuito de protección con protección contra sobrecorriente, sobrevoltaje, bajo voltaje y cortocircuito.
Entrada y salida: Entrada de puerto micro USB, salida USB tipo B & tipo C, con corriente de carga de 600mA, con indicación de modo de funcionamiento y alimentación a través de LED integrados.
Atención especial: La instalación de la batería debe determinarse positiva y negativa. Debe seguir la dirección de "+" "-" en la PCB. Se recomienda utilizar dos baterías 18650.
11,58 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Metal Case,Support PCIe M.2 NVMe SSD Shield Top X1001 / X1003 / X1000 / N04 / N05 & Raspberry Pi 5 Active Cooler (Not Included)
Envío gratis
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler (not included) (case with active cooler,ASIN: B0CMZG29LG)
【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
【Easy Access to all Ports of Pi 5】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
【Package Includes】1x Metal Case for Raspberry Pi 5; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or Power Adapter.
12,65 € EN AMAZON
shield raspberry
raspberry pi shield
shield raspberry pi
raspberry
#1 GANADOR
