Shield Raspberry Pi
Los 10 mejores productos de noviembre de 2025
Última actualización:
17 de noviembre de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
91
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm X1201-C1 Metal Case for Raspberry Pi 5 & X1201 UPS Shield
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Funda para Raspberry Pi 5 UPS: X1201-C1 carcasa metálica para Raspberry Pi 5 y X1201 UPS (ASIN: B0CRT51ZP7), compatible con instalación de enfriador activo
【Soporte apilable TOP Raspberry Pi 5 PIP Shield】Espacio reservado en la parte superior para montar PIP PCIe to NVMe Shield en la parte superior de Raspberry Pi 5. Para ejemplo: X1001 (ASIN: B0CPLF6JYX) / X1003 (ASIN: B0CSJZ7NSS) / X1004 (ASIN: B0D22JPQRB) / X1000 (ASIN: B0CQ4NTZ7G) / M901 (ASIN: B0D111) 79YJ9 K
Colocación precisa del orificio: fácil de insertar y quitar la tarjeta SD, fácil acceso al botón de alimentación X1201
Montaña de pared: con agujero de montaje VESA, puedes colgarlo en la pared o en cualquier lugar que desees
Dimensiones de la caja: 111 x 90,8 x 46,8 mm / 4,37 x 3,57 x 1,84 pulgadas
Lista de embalaje: 1 funda metálica X1201-C1, 1 paquete de tornillos
19,00 € EN AMAZON
Geekworm
Geekworm X1205 5V UPS HAT Shield for Raspberry Pi 5|Max 5.1V 6A Output|Wide 9-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection Function
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Compatibility: Pi 5 UPS HAT compatible con Raspberry Pi 5 16GB/8GB/4GB; Modelo: X1205, Matching Case is X1205-C1
Function: X1205 provides max 5.1V 5000mA Power Backup, gestión inteligente y segura de la energía como encendido automático, apagado seguro, apagado de energía y detección de fallos del adaptador de alimentación
Cómo alimentar (3 opciones): 1. 5Vdc via USB Type-C of X1205; 2. 9-18Vdc via DC5521 barril of X1205; 3. 9-18 VDC via XH2.54 conector de X1205 (no incluye cable de alimentación XH2.54)
Batería de 2 celdas 21700: longitud máxima de la batería 70,5 mm, diámetro máximo 21,1 mm (¡no incluye pilas, por favor prepare yourself!)
Lista de embalaje: 1 x X1205 UPS Shield, 4 x CM2.5 x 4 mm screws; no incluye Raspberry Pi 5, pilas o adaptador de alimentación
63,27 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
KEYESTUDIO
Raspberry Pi Módulo de Placa Relé De DC/AC 4 Canales 5V KEYESTUDIO Relay Shield para Raspberry Pi 2/3/4/4B
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
🍓Este escudo utiliza relé SONGLE, proporcionando entrada y salida de 4 canales. Funciona con Raspberry Pi A+/B+/Pi 2 Modelo B/Pi 3 Modelo B
🍓Todos los canales pueden controlar hasta 24 V CC o 250 V CA en 10 A
🍓Incluye paquete de instalación, código fuente y guía de inicio rápido PDF. 【Descarga tutorial:】👉 https://fs.keyestudio.com/KS0212
🍓Con pruebas funcionales, pruebas de voltaje y corriente, todas nuestras tablas están totalmente calificadas antes de la venta
🍓Adopta materias primas respetuosas con el medio ambiente, ha pasado la certificación FCC de los Estados Unidos y la certificación CE de la UE
12,99 € EN AMAZON
GeeekPi
GeeekPi N04 M.2 2280 PCIe to NVMe SSD Shield PiP PCIe Peripheral Board Top for Raspberry Pi 5
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no se requiere soldering.
PCIe x1 interface in both Gen2 & Gen3 estándar. El recorrido corto de PCIe es más fiable y rápido, reuniendo plenamente los requisitos de señal de PCIe 3.0.
Diseño de orificio de ventilación proporciona excelente ventilación de flujo de aire para enfriar; Integrated Voltage Regulator delivering up to 3A for the 3.3V power rail compliant with M.2 (NGFF) estándar.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NO incluido)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminio Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
14,99 € EN AMAZON
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 16GB / 8GB / 4GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
57,89 € EN AMAZON
#1 GANADOR
