Raspberry Pi Ssd Card
Los 10 mejores productos de mayo de 2025
Última actualización:
24 de mayo de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 128GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
26,95 € EN AMAZON
GeeekPi
GeeekPi Soporte para rack de 10 pulgadas 2U para Raspberry Pi 5/4B, con 4 adaptadores PCIe a M.2 NVMe SSD adaptadores, soporta hasta 4 placas Raspberry Pi 5/4B, compatible con DeskPi RackMate
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Diseño que ahorra espacio: el soporte de montaje en rack 2U está especialmente diseñado para las Raspberry Pi 4B y Raspberry Pi 5 y ofrece una solución robusta y eficiente para acomodar estos ordenadores de una sola placa en un rack de servidor estándar de 10". Optimiza el espacio disponible mientras proporciona potencia informática adicional.
Almacenamiento ampliable: equipado con una placa PCIe NVMe que admite SSD M.2 NVMe en los factores de forma 2230, 2242, 2260 y 2280. Proporciona una interfaz PCIe para transferencias de datos de alta velocidad y permite una expansión de almacenamiento sin problemas. NOTA: ¡Esta función solo es compatible con Raspberry Pi 5!
Acceso práctico: los puertos y tarjetas importantes son fácilmente accesibles gracias a su diseño fácil de usar; interfaz I2C trasera a través de puertos PogoPin para periféricos externos. Pin GPIO4 para controlar LED programables.
Compatibilidad con Raspberry Pi: especialmente diseñada para Raspberry Pi 4B y Raspberry Pi 5, compatible con el sistema operativo y el entorno de software de Raspberry Pi.
LED rojo para identificación del dispositivo o indicador de estado. Puede ser programado por software para mostrar diferentes estados.
Wiki: https://wiki.52pi.com/index.php?title=DP-0046
99,99 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 with 128GB SSD, M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0 3.0, 800MB/s
Envío gratis
87
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
34,51 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 Active Cooler, refer to ASIN: B0D5LCJQZ5
12,96 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Metal Case,Support PCIe M.2 NVMe SSD Shield Top X1001 / X1003 / X1000 / N04 / N05 & Raspberry Pi 5 Active Cooler (Not Included)
Envío gratis
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler (not included) (case with active cooler,ASIN: B0CMZG29LG)
【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
【Easy Access to all Ports of Pi 5】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
【Package Includes】1x Metal Case for Raspberry Pi 5; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or Power Adapter.
12,65 € EN AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Envío gratis
72
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € EN AMAZON
Yahboom
Yahboom Argon One V3 Case Raspberry Pi 5 Case Black Aluminum Alloy Case, Magnetic Upper Vover, with Cooling Fan,for RPi5 NVME M.2 SSD PWM Cooler PCIE, with M.2 Solid-State Card Slot
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Applicable to Pi5】The two cases only support Raspberry Pi5. The Pi5 case has a built-in PWM cooling fan. Argon ONE V3 M.2 has a solid-state card slot for installing SSD. The entire top of the case provides passive cooling for the Raspberry Pi, which combined with the included cooling fan and multiple vents provides excellent cooling.
【Supports installation of M.2 SSD】Only for Argon ONE V3 M.2 model, M.2 NVMe supports multi-size compatibility, the size is 2230/2240/2280, connect M.2 NVMe through the PCle slot on the Raspberry Pi 5 drives and enjoy faster, higher storage access. NOTE: M.2 SSD not included.
【Built-in RP2040 chip and infrared receiver】Through the RP2040 chip of Raspberry Pi, the features and functions of Argon ONE V3 can be controlled according to needs, such as fan speed, power management status, etc. (for example, manual or automatic startup after power outage, only A jumper pin needs to be set inside the shell); with a built-in infrared receiver, you can use an infrared remote control to control the Argon ONE V3 case
【Safe and Convenient Power Button】Provides a power button to realize one-touch switch. No need to use a pin, just press it lightly with your finger to turn on the power. Combined with a one-line script to turn on/off the computer while keeping stored files safe, it also supports custom functions. Equipped with 4 anti-slip pads, which need to be installed manually.
【Sliding magnetic adsorption design】The case has reserved motherboard GPIO ports and various interface holes, and the silk screen is clear; when not in use, the removable upper cover can be hidden by magnetic suction, which is dust-proof, beautiful and easy to disassemble. With black ABS bottom case and black aluminum top cover, it is simple and beautiful.
58,99 € EN AMAZON
raspberry pi ssd
ssd raspberry pi
raspberry pi sd card
raspberry pi sound card
raspberry pi 3 ssd
ssd raspberry pi 3
raspberry pi ssd hat
nvme ssd raspberry pi
raspberry pi nvme ssd
ssd card
#1 GANADOR
