Raspberry Pi Ssd
Los 10 mejores productos de octubre de 2025
Última actualización:
7 de octubre de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Raspberry Pi
Raspberry Pi SSD 256 Go
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Factor de forma M.2 2230
Cumple con el estándar PCIe Gen 3
Interfaz de registro NVMe 1.4 y conjunto de comandos
Requiere un adaptador M.2 compatible con Raspberry Pi 5, como el Raspberry Pi M.2 HAT+ (se vende por separado).
NVMe de 256 GB – 40 K IOPS (lecturas aleatorias de 4 kB), 70 K IOPS (escrituras aleatorias de 4 kB)
NVMe de 512 GB – 50 K IOPS (lecturas aleatorias de 4 kB), 90 K IOPS (4 kB escrituras aleatorias)
47,00 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
87
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 Pulgadas SATA HDD/SSD Expansion Board Compatible con UASP para Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Solamente (no Incluye Raspberry Pi)
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € EN AMAZON
GeeekPi
GeeekPi N04 M.2 2280 PCIe to NVMe SSD Shield PiP PCIe Peripheral Board Top for Raspberry Pi 5
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no se requiere soldering.
PCIe x1 interface in both Gen2 & Gen3 estándar. El recorrido corto de PCIe es más fiable y rápido, reuniendo plenamente los requisitos de señal de PCIe 3.0.
Diseño de orificio de ventilación proporciona excelente ventilación de flujo de aire para enfriar; Integrated Voltage Regulator delivering up to 3A for the 3.3V power rail compliant with M.2 (NGFF) estándar.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NO incluido)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminio Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
19,99 € EN AMAZON
Raspberry Pi
Raspberry Pi Kit SSD (256 GB)
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Cumple con las especificaciones Raspberry Pi HAT+
Contiene Raspberry Pi SSD (NVMe de 256 GB o NVMe de 512 GB)
Incluye cabezal apilable de 16 mm, espaciadores y tornillos para adaptarse a Raspberry Pi 5
Temperatura de funcionamiento: 0 °C a 50 °C (ambiente)
NVMe de 256 GB – 40 K IOPS (lecturas aleatorias de 4 kB), 70 K IOPS (escrituras aleatorias de 4 kB)
NVMe de 512 GB - 50 K IOPS (lecturas aleatorias de 4 kB), 90 K IOPS (escrituras aleatorias de 4 kB)
87,57 € EN AMAZON
Pimoroni
Pimoroni NVMe Base (M.2 2230, 2242, 2260 y 2280) SSD PCIe para Raspberry Pi 5 (¡hasta 800 MB/s!)
31% Descuento
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
solución perfecta para un servidor de archivos o centro multimedia Raspberry Pi 5
sigue las pautas proporcionadas por Raspberry Pi para garantizar la compatibilidad con el sistema operativo Raspberry Pi
solo para uso con SSD NVMe M.2; ¡no funcionará con discos SATA!
funciona con Raspberry Pi 5 (¡no incluido!)
protege de forma segura su disco NVMe
23,06 € EN AMAZON
Geekworm
Geekworm X825-C8 Case, Only Support X825 V2.0 2.5 Inch SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Not Included)
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
20,00 € EN AMAZON
ssd raspberry pi
raspberry pi 3 ssd
ssd raspberry pi 3
raspberry pi ssd hat
ssd usb raspberry pi
nvme ssd raspberry pi
raspberry pi nvme ssd
ssd raspberry pi 3b+
raspberry pi case ssd
raspberry pi ssd case
#1 GANADOR
