Raspberry Pi Hat Sata
Los 10 mejores productos de julio de 2025
Última actualización:
10 de julio de 2025
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 Pulgadas SATA HDD/SSD Expansion Board Compatible con UASP para Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Solamente (no Incluye Raspberry Pi)
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 Hat Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, MAX Speed 1231 MB/s
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € EN AMAZON
KEYESTUDIO
KEYESTUDIO PCIE-M.2NVME SSD Shield para Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports:2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it: New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Tutoriali link-https://bit.ly/4eSOPE7
14,57 € EN AMAZON
ODSS
Raspberry Pi 5 Penta SATA HAT, hasta 5 discos SATA HAT
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Paquete: 1 sombrero Penta SATA
Perfectamente compatible con Raspberry Pi 5 Series
La solución perfecta para servidor NAS: 4 SATA + 1 interfaz eSATA
Interfaces de expansión adicionales: diseñadas para soportar pantalla OLED y ventilador
Opciones de interfaz de alimentación flexible: interfaz de alimentación ATX estándar o interfaz de alimentación de 12 V CC
110,89 € EN AMAZON
APBVIHL
Raspberry Pi 5 Penta SATA HAT con placa superior, hasta 5 discos SATA
84
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
El paquete contiene: 1 sombrero Penta Sata+tabla superior
Perfectamente compatible con Raspberry Pi serie 5
La solución perfecta para servidor NAS: 4 Sata + 1 interfaz eSata
Opciones de interfaz de alimentación flexibles: interfaz de alimentación ATX estándar o interfaz de alimentación de 12 V CC
Interfaces de expansión adicionales: diseñadas para soportar pantalla OLED y ventilador
115,00 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Kit de Almacenamiento para Raspberry Pi 4 Modelo B
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
【Script for PWM fan】Refer to: wiki.geekworm.com/X-C1_Software. If the fan does not work in third-party OS, only remove the jumper on 'Fan FS' of X-C1 to let the fan run at full speed
【Wifi description】5G WiFi is stable enough, recommend using Ethernet or 5G WiFi
62,89 € EN AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
85,89 € EN AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € EN AMAZON
GeeekPi
GeeekPi Carcasa NAS de Aluminio para Raspberry Pi 4 con Ventilador PWM y Adaptador M.2 SATA SSD - Refrigeración Pasiva con Ventilador Ultra Silencioso 3510 para Modelo B 2GB 4GB 8GB
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Compatible con Raspberry Pi 4 Modelo B: esta funda de aluminio contiene un disipador de calor de aluminio Armor Lite y una placa de expansión SSD M.2 SATA, solo está diseñada para Raspberry Pi 4 Modelo B versión 1GB/2GB/4GB/8GB.
La funda con material de aluminio de alta calidad, resistente y duradera, puede proteger bien la Raspberry Pi y mantener tu Raspberry Pi 4 libre de arañazos, polvo y daños.
Con una placa de expansión SSD M.2 SATA que puede ampliar el almacenamiento masivo para tu Raspberry Pi. Nota: las unidades SSD Raspberry Pi 4B y M.2 SATA no están incluidas en el paquete, requiere compra adicional. Presta atención al tipo de unidad SSD, debe ser M.2 SATA SSD 2280, la placa adaptadora no es compatible con NVME SSD.
Buen efecto de disipación de calor: con ventilador de refrigeración ultra silencioso 3510 y almohadillas térmicas, puede reducir la temperatura de la placa Raspberry Pi rápidamente. A diferencia de los ventiladores ordinarios, este ventilador de refrigeración soporta la regulación de velocidad PWM, que es perfectamente compatible con Raspberry Pi OS.
Recomendamos encarecidamente utilizar el sistema operativo oficial Raspberry Pi, que puede configurar directamente el ventilador para ajustar la velocidad de acuerdo con la temperatura de la CPU a través del comando raspi-config. Otros sistemas operativos pueden requerir que escribas software tú mismo y envíes señales PWM al ventilador a través de pines GPIO para controlar la velocidad del ventilador.
El paquete incluye: 1 funda de aluminio, 1 ventilador de refrigeración ultrasilencioso 3510, 1 placa de expansión SSD SATA M.2 (Nota: Raspberry Pi no está incluida)
Soporte tecnológico: wiki.52pi.com/index.php?title=ZP-0140
45,99 € EN AMAZON
raspberry pi sata hat
raspberry pi 3 sata hat
raspberry pi 4 sata hat
raspberry pi 5 sata hat
raspberry pi sata
sata raspberry pi
hat raspberry pi
raspberry pi hat
raspberry sata hat
raspberry pi 3 hat