Raspberry Pi 4 Hat
Los 10 mejores productos de julio de 2025
Última actualización:
11 de julio de 2025
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
85,89 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Carcasa de Aluminio Con Ventilador y Disipador - Compatible Con Modelo B y PoE Hat
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
15,99 € EN AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 PoE Hat Aislado Compatible con el estándar IEEE 802.3af o 802.3at PoE, con Raspberry Pi Ventilador 30x30x7mm y Disipador para Raspberry Pi 4 Modelo B / 3B + 3B Plus
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Estándar: IEEE 802.3af-2003 PoE
Voltaje de entrada: 37 ~ 57 V CC, dispositivo de clase 2; Voltaje de salida: 5 V CC / 2,5 A
Enfriamiento: ventilador sin escobillas de 30 mm x 30 mm con 4 sombreretes
Fuente de alimentación en modo conmutado completamente aislada
Soporte tecnológico: https: //wiki.52pi.com/index.php/RPi_Isolated_PoE_Hat_SKU: _EP-0127
21,99 € EN AMAZON
Waveshare
Waveshare SIM7600G-H 4G Hat (B) for Raspberry Pi Supports LTE Cat-4 4G/3G/2G GNSS Positioning Global Band
Envío gratis
87
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
4G HAT FOR RASPBERRY PI,Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning,Based on SIM7600G-H, Global Band
Suitable For Raspberry Pi / PC,Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
Global Band 4G / 3G / 2G Support,Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network
USB HUB Feature,Onboard USB HUB Chip With USB2.0/1.1 Compliant, Providing 2x USB-A Connector And 1x USB Solder Pad
GNSS Positioning,Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Telephoto Call & SMS Support,Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
98,99 € EN AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 Hat, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € EN AMAZON
Waveshare
Power Over Ethernet (PoE) Hat para Raspberry Pi 4B / 3B+, IEEE 802.3af/at, 5V 4A USB-A y 12V 2A Salidas de Encabezado, Ventilador de Refrigeración Integrado y Chip MP8676 Buck
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
25,99 € EN AMAZON
Waveshare
Waveshare USB 3.2 Gen1 HUB Hat for Raspberry Pi 4 with 4X USB 3.2 Gen1 Ports Up To 5 Gbps Data Rate Support Driver-Free Plug and Play USB Capability Expansion Board
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € EN AMAZON
SUNFOUNDER
SunFounder Placa de expansión Robot Hat diseñada para Raspberry Pi 4/3B+/3B/Zero W Robot, IoT, sensores, motores, servocontroladores, batería recargable incluida, 5V2A, altavoz, ADC, PWM, IIC, UART,
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Solución de hardware todo en uno: el robot HAT integra funcionalidades como conducción de motor, salida de audio, ADC y PWM, ofreciendo a los usuarios una plataforma de hardware completa. Esto elimina la necesidad de comprar y conectar varios módulos individuales, ahorrando tiempo y costo. Compatible con Raspberry Pi 5/4/3B+/3B/Zero W/Zero
Compatibilidad y capacidad de expansión sin costuras: perfectamente alineado con los pines GPIO de la Raspberry Pi, garantiza una conexión impecable. Con múltiples interfaces como SPI, UART e I2C, proporciona a los usuarios una amplia gama de opciones de expansión y conectividad, atendiendo a diversas necesidades de proyectos, incluyendo robots móviles, sistemas domésticos inteligentes y sistemas automatizados de riego de plantas
Gestión avanzada de energía: equipado con capacidades de carga para baterías de litio y una descarga de 5 V/3 A CC-CC, proporciona una fuente de alimentación estable para Raspberry Pi y otros dispositivos, lo que hace que los proyectos móviles e inalámbricos sean factibles
Seguridad y fiabilidad: el sombrero robot viene con múltiples mecanismos de protección, incluyendo protección de polaridad inversa, protección de bajo voltaje de entrada y protección contra sobrecalentamiento, asegurando un funcionamiento seguro en diversas condiciones
Apoyo educativo y comunitario: una excelente herramienta para el aprendizaje y la educación, el sombrero robot es adecuado para principiantes, ingenieros y profesores por igual. Ofrece una gran cantidad de tutoriales, recursos técnicos, ayudando a los usuarios a comenzar y dar vida a sus ideas
34,99 € EN AMAZON
Waveshare
Waveshare USB HUB Hat (B) For Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Envío gratis
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
4x extended USB ports, compatible with USB 2.0 / 1.1
Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
13,99 € EN AMAZON
raspberry pi 4 sata hat
raspberry pi 4 ssd hat
poe hat raspberry pi 4
raspberry pi 4 poe hat
raspberry 4 hat
raspberry 4 pi
raspberry pi 4
hat raspberry pi
raspberry pi hat
carcasa raspberry pi 4
#1 GANADOR
