Geekworm X1009
Los 10 mejores productos de octubre de 2025
Última actualización:
8 de octubre de 2025
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case with Active Cooler, Support Top PCIe to M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 (P579-H500)
Envío gratis
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), M901(ASIN; B0D179YJ9K) , X1000 (ASIN: B0CQ4NTZ7G) ②for separate Raspberry Pi 5 16GB/8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
24,89 € EN AMAZON
Geekworm
Geekworm X1003 PCIe M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB with official active cooler【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
15,50 € EN AMAZON
Geekworm
Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Para usar con: ① para Raspberry Pi 5 con PCIe a Dual M.2 NVMe Shield Base X1005 (ASIN: B0D89MZTCY); ② para Raspberry Pi 5 con PCIe to M.2 NVMe Shield Base X1002 (ASIN: B0CQXPCNZK)
Compatible con Raspberry Pi 5 Active Cooler (NO incluido). Soporta la instalación activa del refrigerador Raspberry Pi 5, junto con orificios de refrigeración bellamente elaborados para garantizar una disipación eficiente del calor
Fácil acceso a Pi 5: la funda P580-V2 Raspberry Pi 5 puede acceder fácilmente a Raspberry Pi 5 USB-C, puertos micro HDMI, puertos USB, conector Ethernet, ranura para tarjeta SD, botón de alimentación, etc.
Lista de embalaje: 1 funda metálica P580-V2, 1 x 4 almohadillas de goma; 1 x paquete de tornillos
Nota: no incluye placa base Raspberry Pi 5, X1002/X1005 PIP Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, o adaptador de alimentación. !
12,89 € EN AMAZON
Geekworm
Geekworm X1012 PCIe to M.2 HAT NVMe SSD Shield Support PoE for Raspberry Pi 5
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Compatibilidad: solo compatible con Raspberry Pi 5 SBC (no incluye Raspberry Pi 5), modelo: X1012
Compatible con PoE: alimentación a través de Ethernet y compatible con especificaciones 802.3af/at
M2 NVMe SSD soportado: soporta instalación M.2 KEY-M NVMe SSD 2230/2242/2260/2280 de longitud. Viene con standoffs para instalación SSD 2230/2242/2260.
【 Cómo alimentar 】 35 – 57 V CC a través de Ethernet o 40 – 57 V CC mediante conector de alimentación auxiliar
Lista de embalaje: 1 x X1012 NVMe+protector POE, 2 x cable PCIe FFC (1 pieza es para respaldo), 1 x paquete de tornillos
Funda a juego (no incluida). Referencia a P579 (ASIN: B0CRB3DT5M), pero P579 no tiene orificio reservado para el conector de alimentación auxiliar X1012 CC.
41,00 € EN AMAZON
Geekworm
Geekworm X1500-C1 - Carcasa metálica para Raspberry Pi CM5 y X1500/X1501 IO Carrier Board
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Carcasa metálica para CM5 y X1500/X1501: esta es una funda metálica X1500-C1 para Raspberry Pi CM5 y X1500 IO Board (ASIN: B0F5WNWBFY) / X1501 IO Board (ASIN: B0F5WQQJVL)
Diseño compacto y ahorro de espacio: dimensiones optimizadas que aseguran una pequeña huella en el pie, ideal para entornos conformados en el espacio mientras mantiene la compatibilidad completa con las tablas X1500/X1501
【Opciones de montaje versátiles】Características soportes de montaje reforzados laterales para montaje en pared fácil o instalación vertical/horizontal en bastidores, armarios o proyectos de bricolaje.
Dimensiones de la caja: 110 x 90 x 33 mm
Lista de embalaje: 1 funda metálica X1500-C1, 4 tornillos M2,5 x 5 mm, 4 alfombrillas antideslizantes
18,50 € EN AMAZON
Geekworm
Geekworm X1500 CM5 IO Carrier Board for Raspberry Pi Compute Module 5 Support Dual M.2 NVMe SSD|1GbE Ethernet Port
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Compatibility: X1500 is compatible with Raspberry Pi Compute Module 5 CM5 and all CM5 variants
Function: Support Dual M.2 NVMe SSD, with 1GbE Ethernet Ports, Dual USB 3.0 Ports, Dual Hdmi 2.0 Ports, Dual MIPI DSI/CSI-2 Connectors, RTC, PWM Fan connector and convenient power button
How to Power: 5.1Vdc +/-5% 5A power via USB-C port of X1500; Please use power supply capable of delivering 5.1V at 5A output, an incompatible power supply with a lower output voltage may fail to power on the system
Packing List: 1 x X1500 CM5 IO Carrier Board, 1 x Screws Pack Accessories
Matching Metal Case (Not included): Case for Raspberry Pi CM5 and X1500 IO board, refer to X1500-C1 case (ASIN: B0F5WXFX3R)
58,00 € EN AMAZON
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 16GB / 8GB / 4GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
57,89 € EN AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Kit de Almacenamiento para Raspberry Pi 4 Modelo B
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
【Script for PWM fan】Refer to: wiki.geekworm.com/X-C1_Software. If the fan does not work in third-party OS, only remove the jumper on 'Fan FS' of X-C1 to let the fan run at full speed
【Wifi description】5G WiFi is stable enough, recommend using Ethernet or 5G WiFi
62,89 € EN AMAZON
geekworm
#1 GANADOR
