Geekworm
Los 10 mejores productos de octubre de 2025
Última actualización:
8 de octubre de 2025
Geekworm
Geekworm Raspberry Pi 5 Case with Active Cooler, Support Top PCIe to M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 (P579-H500)
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), M901(ASIN; B0D179YJ9K) , X1000 (ASIN: B0CQ4NTZ7G) ②for separate Raspberry Pi 5 16GB/8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
24,89 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 /X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, PCIe to NVMe SSD Shield, M.2 NVMe SSD, Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,96 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm X1015 PCIe to M.2 NVMe SSD Shield Support Hailo-8 AI Accelerator for Raspberry Pi 5
Envío gratis
86
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Compatibilidad: Raspberry Pi 5 NVMe solo compatible con Raspberry Pi 5, modelo: X1015
【Múltiples M2 NVMe SSD soportado】Soporte M.2 KEY-M NVMe SSD 2230/2242/2260/2280 de longitud de instalación. Viene con cable de cobre SSD para instalación SSD 2230/2242/2260.
【 Raspberry Pi 5 AI Hat Extension】 Soporta módulo de aceleración Hailo AI integrado alrededor del chip Hailo-8L del kit Raspberry Pi AI.
【Cómo alimentar】 5 V CC +/-5% de potencia a través del cabezal de pin GPIO y FFC, convertido a 3,3 V máx. 3 A para alimentar el SSD; se recomienda utilizar el adaptador de alimentación Geekworm PD de 27 W (ASIN: B0CP8SRXSC) o (ASIN: B0CZCZF2QV)
Lista de embalaje: 1 placa periférica PCIe X1015, 2 cables FFC PCIe de 40 mm (uno como copia de seguridad), 1 cabezal GPIO, 1 paquete de tornillos (nota: no incluye Raspberry Pi 5, SSD, tarjeta TF o adaptador de alimentación)
Funda a juego (no incluida). Referencia a la funda metálica P579 (ASIN: B0CRB3DT5M), o P579 con refrigerador activo oficial (ASIN: B0CT4P893Q), o P579 con H501 Active Coolr (ASIN: B0D5LCJQZ5)
17,00 € EN AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,00 € EN AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.5 (MAX 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 4 8GB/4GB/2GB/3B+/3B/2B
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Function】X728 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B09Z6CC262), or N300 Case (ASIN: B07WZXPR2W), P165-A (ASIN: B089CK12C6), P165-B (ASIN: B08N617L1J)
【Other Geekworm UPS Recommended】X703 ultra-compact ups (ASIN: B09HZXDN8S); X708 UPS (ASIN: B08DJ5YZ7M)
51,89 € EN AMAZON
Geekworm
Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4B Heatsink/Radiator for Raspberry Pi 4 Model B & Pi 4 Expansion Board Support POE Extension
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
New version Geekworm embedded armor aluminum alloy Heatsink (P165-B) is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, embedded heatsink with 11mm thickness. WIKI for reference: raspberrypiwiki.com/P165
Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board(also support PoE board); It is compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board.
Only equipped with 4pcs M2.5X5+6mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.
Add one piece thermal tape as gift in case you will need. But it is strongly recommend to use the CPU grease (not included) to get better heat dissipation.
Supports the installation of 30mm fan; Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved.
9,80 € EN AMAZON
Geekworm
Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Para usar con: ① para Raspberry Pi 5 con PCIe a Dual M.2 NVMe Shield Base X1005 (ASIN: B0D89MZTCY); ② para Raspberry Pi 5 con PCIe to M.2 NVMe Shield Base X1002 (ASIN: B0CQXPCNZK)
Compatible con Raspberry Pi 5 Active Cooler (NO incluido). Soporta la instalación activa del refrigerador Raspberry Pi 5, junto con orificios de refrigeración bellamente elaborados para garantizar una disipación eficiente del calor
Fácil acceso a Pi 5: la funda P580-V2 Raspberry Pi 5 puede acceder fácilmente a Raspberry Pi 5 USB-C, puertos micro HDMI, puertos USB, conector Ethernet, ranura para tarjeta SD, botón de alimentación, etc.
Lista de embalaje: 1 funda metálica P580-V2, 1 x 4 almohadillas de goma; 1 x paquete de tornillos
Nota: no incluye placa base Raspberry Pi 5, X1002/X1005 PIP Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, o adaptador de alimentación. !
12,89 € EN AMAZON
Geekworm
Geekworm X1003 PCIe M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Envío gratis
65
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB with official active cooler【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
15,50 € EN AMAZON
geekworm x1002
geekworm x1009
geekworm raspberry
geekworm x728
geekworm naspi
geekworm p579
geekworm p580
#1 GANADOR
