main logo

Waveshare Esp32-s3 5inch

Los 10 mejores productos de julio de 2025
Última actualización: 12 de julio de 2025
Waveshare
Waveshare
Waveshare ESP32-S3 5 Inch Capacitive Touch Display + Development Board, 1024 x 600, 178° Viewing Angle, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Support WiFi, Onboard
star

99

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • A microcontroller development board with 5inch capacitive touch display, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • 1024x600 resolution, 65K color. 178° Viewing Angle. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation
  • Onboard voltage regulator, supports 7~36V wide range power supply. Onboard RTC chip and rechargeable battery to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
  • Onboard LED indicators for indicating the power and battery recharging status. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 55,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Pantalla táctil capacitiva de 5 pulgadas + placa de desarrollo, táctil de 5 puntos, procesador LX7 de doble núcleo de 32 bits, frecuencia de hasta 240 MHz, compatible con WiFi,
Envío gratis
star

96

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#3

  • Una placa de desarrollo de microcontrolador con pantalla táctil capacitiva de 5 pulgadas, puede ejecutar sin problemas programas GUI como LVGL. Combinado con varias interfaces periféricas, adecuado para el rápido desarrollo de la HMI y otras aplicaciones ESP32-S3
  • Resolución de 800 x 480, color 65K. Ángulo de visión de 160°. Equipado con procesador Xtensa LX7 de doble núcleo de 32 bits, frecuencia principal de hasta 240 MHz. SRAM integrado de 512 KB y ROM de 384 KB, con flash integrado de 16 MB y PSRAM de 8 MB
  • Soporta Wi-Fi de 2.4 GHz (802.11 b/g/n) y BT5 (LE), con antena integrada. Soporta control táctil capacitivo a través de interfaz I2C, táctil de 5 puntos con soporte de interrupción. Soporta entrada digital pasiva y activa, con aislamiento optoacoplador bidireccional
  • Regulador de voltaje integrado, soporta fuente de alimentación de amplio rango de 7 ~ 36 V. Chip RTC integrado y batería recargable para garantizar que los datos de tiempo no se pierdan cuando se pierde energía. CAN, RS485, interfaz I2C y ranura para tarjeta TF, cabezal de batería GH1.25 2P e interfaces IO aisladas digitales, etc.
  • Indicadores LED integrados para indicar el estado de alimentación y recarga de la batería. Soporta salida digital con aislamiento optoacoplador, proporciona una mayor capacidad de conducción con corriente de hundimiento de hasta 450 mA. Soporta reloj flexible, ajuste independiente de la fuente de alimentación del módulo y otros controles para realizar un bajo consumo de energía en diferentes escenarios
  • 51,99 € EN AMAZON
Waveshare
Waveshare
WaveshareESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board Onboard ESP32-S3-WROOM-1-N8R8 Module Dual Core Processor Supports ESP-IDF MicroPython with Pre-Soldered Header Version
Envío gratis
star

79

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • The ESP32-S3-DEV-KIT-N8R8 is a compact-size microcontroller development board with multiple digital interfaces. ESP32-S3 Integrates 2.4 GHz Wi-Fi (802.11 B/G/N) With 40 MHz Of Bandwidth Support Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (LE) And Bluetooth Mesh
  • Adopts ESP32-S3-WROOM-1-N8R8 module, which is equipped with a dual-core Xtensa 32-bit LX7 processor with 240MHz running frequency, built-in 512 KB SRAM (TCM) and 8MB PSRAM
  • Onboard CH343 and CH334 chips for USB and UART development via USB-C port. Compatible with the pinout of ESP32-S3-DevKitC-1 development board, more convenient to use and expand a variety of peripheral modules.
  • Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Type-C connector, easier to use
  • Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios You can choose ESP-IDF, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.
  • 19,99 € EN AMAZON