main logo

Waveshare Esp32

Los 10 mejores productos de julio de 2025
Última actualización: 12 de julio de 2025
Waveshare
Waveshare
Waveshare ESP32-S3-POE-ETH-8DI-8RO(PoE Network Port), Industrial 8-Ch ESP32-S3 WiFi Relay Module, Isolated RS485 Interface, Xtensa 32-bit LX7 2Core Processor, Up To 240MHz, Multi Isolation Protection
Envío gratis
star

91

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • PoE network port version, with built-in PoE module for PoE capability (compliant with IEEE 802.3af standard). Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance
  • High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control
  • Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging
  • Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal
  • Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use
  • 69,99 € EN AMAZON
Waveshare
Waveshare
WaveshareESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board Onboard ESP32-S3-WROOM-1-N8R8 Module Dual Core Processor Supports ESP-IDF MicroPython with Pre-Soldered Header Version
Envío gratis
star

78

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • The ESP32-S3-DEV-KIT-N8R8 is a compact-size microcontroller development board with multiple digital interfaces. ESP32-S3 Integrates 2.4 GHz Wi-Fi (802.11 B/G/N) With 40 MHz Of Bandwidth Support Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (LE) And Bluetooth Mesh
  • Adopts ESP32-S3-WROOM-1-N8R8 module, which is equipped with a dual-core Xtensa 32-bit LX7 processor with 240MHz running frequency, built-in 512 KB SRAM (TCM) and 8MB PSRAM
  • Onboard CH343 and CH334 chips for USB and UART development via USB-C port. Compatible with the pinout of ESP32-S3-DevKitC-1 development board, more convenient to use and expand a variety of peripheral modules.
  • Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Type-C connector, easier to use
  • Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios You can choose ESP-IDF, MicroPython, or other development environments in software so that you can easily and quickly get started and apply it to the product.
  • 19,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 with Display, Support 3.7V Li Battery(Not Included)
Envío gratis
star

75

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € EN AMAZON