main logo

Waveshare Display

Los 10 mejores productos de octubre de 2025
Última actualización: 7 de octubre de 2025
Waveshare
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display Hat, 240x240 Pixels with Embedded Controller, Communicating Via SPI Interface
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
  • This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi)
  • Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Envío gratis
star

96

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#2

  • V4 Latest Version.Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,,but incompatible with Netatmo
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
star

94

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 69,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13inch E-Paper Display Hat V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Envío gratis
star

92

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#4

  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 Latest Version 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. But incompatible with Netatmo.Onboard voltage translator, for 3.3V/5V MCUs.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating Via SPI Interface
Envío gratis
star

83

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 8.8inch IPS Side Monitor 480×1920 Resolution HDMI Display Panel HiFi Speaker No Touch 170° Viewing Angle Supports All Versions of Raspberry Pi Jetson Nano PC
Envío gratis
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • Supports Raspbian / Ubuntu / Kali / WIN10 IoT / Retropie, driver free
  • Supports all versions of Raspberry Pi
  • Jetson Nano:Supports Ubuntu
  • Supports Windows 11 / 10 / 8.1 / 8 / 7
  • HDMI cable and USB cable in the examples are NOT included.
  • 109,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Envío gratis
star

79

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • V4 Latest Version Ink display, This is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!
  • No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo.
  • Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.9inch IPS Display, 400x1280, Toughened Glass Panel, HDMI Interface, with Hi-Fi Speaker, Collapsible Stand&Metal Case, Compatible with Raspberry Pi/Jetson Nano/Core3566/PC
Envío gratis
star

78

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • This 7.9-inch IPS display with a hardware resolution of 400 x 1280 (H x V). Zinc alloy case, toughened glass panel with up to 6H hardness. Can be used as a PC Side Monitor or a Machine Monitoring Screen.(Note: This screen defaults to vertical display, you can modify the software to set it to horizontal display)
  • Support Plug & Play Without Driver. When used for Raspberry Pi, it supports Raspberry Pi OS/Ubuntu/Kali/Retropie. When used for Jetson Nano, it supports Ubuntu. When working as a computer monitor, it supports Windows 11 / 10 /8.1 / 8 /7 without a driver. Support backlight control for power saving
  • Multiple Application: [Used for Hardware Monitoring]Monitoring Temperature/Usage/Voltage/Fan/Network speed. [Used as a Dynamic Light Panel]Dynamic wallpaper/Video/Picture/Live comment
  • Multiple Application: [Used for Music Spectrum] A Visualized music spectrum, pulsing with the rhythm of the music. [Used as a PC Side Monitor]Shortcut Command Bar/Auxiliary Display
  • Up To 170° Wide Viewing Angle. Vivid colors for more delicate picture. This IPS screen with excellent display performance brings an amazing visual experience. Supports HDMI Signal Input. With dual-track stereo speaker, high-fidelity sound quality, greatly enhances your listening experience
  • 108,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 4.2Inch E-Paper Display Panel Module Kit 400 x 300 Resolution 3.3v E-Ink Electronic PaperScreen,Embedded Controller for Raspberry Pi/Arduino/Nucleo Support Full Refresh SPI Interface
Envío gratis
star

70

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 43,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4inch Capacitive Touch Display Development Board V3(Latest Version), 480x480, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Support WiFi, Onboard Antenna
Envío gratis
star

70

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • ESP32-S3-Touch-LCD-4 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates 16MB Flash and 8MB PSRAM. Onboard 4inch 480 × 480 capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces to quickly develop the HMI of ESP32-S3, suitable for scenarios such as smart control panel, home gateway, intelligent interactive panel, industrial control, and smart lighting control.
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color. Features optimized RS485 solution, power isolation, TVS, and power supply.
  • Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
  • 47,99 € EN AMAZON
waveshare