main logo

Waveshare Arduino

Los 10 mejores productos de julio de 2025
Última actualización: 13 de julio de 2025
Waveshare
Waveshare
ESP32-C6 Microcontroller WiFi 6 Mini Development Board with Pre-soldered Header ESP32-C6FH4 Module with 32-bit RISC-V Processor, WiFi 6+Bluetooth 5+Bluetooth Mesh,Compatible with ESP-IDF, Arduino
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • ESP32-C6-Zero WiFi 6 Development Board with Pre-soldered Header .Based on ESP32-C6FH4, onboard multi-function GPIO pins.Castellated Module, Suitable For SMD Applications
  • ESP32-C6 Suitable For AIoT Applications.Powered By A High-Performance 32-Bit RISC-V Processor And A Low-Power 32-Bit RISC-V Processor, The Main Frequency Is Up To 160 MHz, Powerful AI Computing Capability & Reliable Security Features
  • WIFI 6 And BLE 5 Support.ESP32-C6 Integrates 2.4 GHz Wi-Fi 6 (802.11 Ax/B/G/N) With 40 MHz Of Bandwidth Support, Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (LE) And Bluetooth Mesh
  • Supports ESP-IDF, Arduino.Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
  • 12,49 € EN AMAZON
Waveshare
Waveshare
Waveshare 1.5inch RGB OLED Display Module 128x128 Pixels 16-bit High Color SPI Interface with Embedded Controller
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#2

  • This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
  • 128x128 high resolution, 65K colors, clearly displays colorful images
  • Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Driver: SSD1351; Interface: 4-wire SPI, 3-wire SPI; Display color: RGB, 65K colors; Resolution: 128x128; Viewing angle: >160° Operating voltage: 3.3V / 5V; Dimension: 44.5 x 37 (mm)
  • 25,99 € EN AMAZON
Waveshare
Waveshare
Waveshare RGB Full-Color LED Matrix Panel 2.5mm Pitch 64x32 Pixels Adjustable Brightness Compatible with Raspberry Pi/Raspberry Pi Pico / ESP32 / Arduino
Envío gratis
star

95

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • Compatible with Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino.
  • Chainable design,multi LED matrix panel can be chained together to build a larger panel via HUB75 input/output header.
  • Usage Scenarios,DIY maker desktop or wall mount display, signboard, environment monitor.
  • 28,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Wave Rover Flexible and Expandable 4WD Mobile Robot Chassis, Full Metal Body, Multiple Hosts Support, with Onboard ESP32 Module
Envío gratis
star

89

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • Equipped with N20 reduction motors that use high-quality gearboxes, enabling it to travel at a high speed of 1.25m/s. The flexible rubber tires significantly reduce the impact of complex terrains on the product. It features a 0.91-inch OLED screen for interactive purposes. The product is designed with a charging interface and automatic download circuit, allowing it to be used while charging
  • The UPS power module on board contains an INA219 acquisition chip, facilitating real-time monitoring of battery voltage and charging current. The UPS power module utilizes three series-connected 18650 batteries with a large capacity of 7800mAh, providing a higher output current and stronger motor power. It also offers 5V and 3.3V outputs for expanding other devices
  • The module includes a lithium battery protection circuit, offering functions such as overcharging, over-discharging, overcurrent, and short-circuit protection. The sample code is developed using Arduino IDE, eliminating the need for manual configuration of the compilation environment. The open-source resource includes planar drawings and chassis structural drawings, including 3D models, facilitating secondary development
  • Upon startup, the ESP32 automatically establishes a WIFI hotspot. Users can connect and log in to the control interface using a smartphone (Android/iOS) or a computer (Linux/Windows/Mac) with any Chromium-based browser, without requiring an app download. The entire code is open-source and comes with online rich development documentation and tutorials
  • The slave ESP32 can be used to drive DC motors and serial bus servos and supports interfaces for OLED screens, TF card slots, a nine-axis IMU module, WiFi, and Bluetooth. Even without installing an upper-level device, it can be used independently.The system can be extended with various host devices, using serial communication to transmit control data in JSON format
  • 128,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Envío gratis
star

86

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
star

81

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 69,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) V2,296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Envío gratis
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 29,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 1.28 Pulgadas Pantalla Redonda LCD para Arduino/Jetson Nano/Raspberry Pi / STM32, Monitor de Pantalla IPS 240 × 240 Colores 65K RGB, con SPI Bus, Controlador GC9A01 Integrado
star

76

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • 1.28" LCD 240×240 round high-definition screen display module for Raspberry Pi/Jetson Nano/Arduino/STM32
  • 65K RGB colors monitor, IPS screen, clear and colorful displaying effect
  • Controlled via 4-wire SPI Bus, minimizes required IO pins, embedded GC9A01 driver, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
  • Operating voltage: 3.3V/5V, Dimension: 40.4×37.5(mm) Φ37.5(mm)
  • Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
  • 21,59 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3-Nano Development Board Onboard Microcontroller ESP32-S3R8 Compatible with Arduino Nano ESP32, 2.4GHz Wi-Fi and Bluetooth LE Dual-Mode Wireless Communication
Envío gratis
star

72

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • ESP32-S3-Nano Development Board adopts ESP32-S3R8 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
  • Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 16MB Flash memory.Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance
  • Supports seamlessly switching between Arduino and MicroPython programming, more flexible usage.Supports HID, emulating Human Interface Devices such as keyboards or mice via USB port for easier interaction with PC
  • Compatible with Arduino IoT Cloud, allows monitoring and controlling your project from anywhere by using the Arduino IoT Cloud app
  • 16,49 € EN AMAZON
Waveshare
Waveshare
Waveshare 1.54 Inch E-Paper Screen Display Module 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
star

70

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,19 € EN AMAZON
waveshare