Ups Raspberry Pi 5
Los 10 mejores productos de mayo de 2025
Última actualización:
24 de mayo de 2025
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (MAX 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € EN AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € EN AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
94
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
55,89 € EN AMAZON
Geekworm
Geekworm X1206 4-Cell 5V UPS Shiled for Raspberry Pi 5, Max 5.1V 6A Output|Wide 9-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Compatibility: UPS compatible con Raspberry Pi 5 16GB/8GB/4GB; Modelo: X1206; Matching Case is X1206-C1
Function: X1206 provides max 5.1V 6000mA Power Backup, Smart and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
Cómo alimentar (3 opciones): 1. 5Vdc via USB Type-C of X1206; 2. 9-18Vdc via DC5521 barril of X1206; 3. 9-18 VDC via XH2.54 conector de X1206 (no incluye cable de alimentación XH2.54)
Batería compatible con 4 celdas 21700: longitud máxima de la batería 70,5 mm, diámetro máximo de 21,1 mm. (No incluye pilas, por favor prepare usted mismo)
Lista de embalaje: 1 x X1206 5V UPS Shield, 1 x Screws Pack (no incluye Pi 5, pilas o adaptador de alimentación)
67,00 € EN AMAZON
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with MAX 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Envío gratis
85
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
57,89 € EN AMAZON
Waveshare
Waveshare UPS Hat (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (Not Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € EN AMAZON
Waveshare
Waveshare Uninterruptible Power Supply UPS Hat Compatible with Raspberry Pi,Stable 5V Power Output Multi Battery Protection Circuits
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 2.5A continuous output current.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
35,99 € EN AMAZON
Geekworm
Geekworm X1202-C1 Metal Case for Raspberry Pi 5 & X1202 UPS Shield
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Funda para Raspberry Pi 5 UPS: X1202-C1 carcasa metálica para Raspberry Pi 5 y X1202 UPS (ASIN: B0CRTRQNG9), soporte activo de instalación del refrigerador
【Soporte apilable TOP Raspberry Pi 5 PIP Shield】Espacio reservado en la parte superior para montar PIP PCIe to NVMe Shield en la parte superior de Raspberry Pi 5. Para ejemplo: X1001 (ASIN: B0CPLF6JYX) / X1003 (ASIN: B0CSJZ7NSS) / X1004 (ASIN: B0D22JPQRB) / X1000 (ASIN: B0CQ4NTZ7G) / M901 (ASIN: B0D111) 79YJ9 K
Colocación precisa del orificio: fácil de insertar y quitar la tarjeta SD, fácil acceso al botón de alimentación X1202
Montaña de pared: con agujero de montaje VESA, puedes colgarlo en la pared o en cualquier lugar que desees
Dimensiones de la caja: 100 x 90,8 x 62,8 mm
Lista de embalaje: 1 funda metálica X1202-C1, 1 paquete de tornillos
19,50 € EN AMAZON
Geekworm
Geekworm X1205-C1 Metal Case for Raspberry Pi 5 and X1205 UPS and Active Cooler and X1001/X1003/X1004/X1015/M901/X1000 PCIe Top
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
UPS Case for Raspberry Pi 5: Metal Case for Raspberry Pi 5 and X1200 UPS ONLY, support active cooler and top PCIe board installation, modelo: X1205-C1
Support Stacking TOP Raspberry Pi 5 PCIe Adaptador: Space reserved for mounting TOP PCIe to NVMe Shield above Raspberry Pi 5. Such as X1001/X1004/X1003/X1000/X1015/M901
Dimensiones de la caja: 91 x 76 x 64 mm
Colocación del agujero preciso: fácil de insertar y quitar la tarjeta SD, fácil acceso al botón de alimentación X1205
Montaña de pared: con agujero de montaje VESA, puedes colgarlo en la pared o en cualquier lugar que desees
Lista de embalaje: 1 x X1205-C1 Metal Case, 1 x Screws Pack; NO incluye Raspberry Pi 5, batería, X1205 UPS, o PCIe to NVMe Shield
19,00 € EN AMAZON
Geekworm
Geekworm X1205 5V UPS HAT Shield for Raspberry Pi 5|Max 5.1V 6A Output|Wide 9-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection Function
Envío gratis
66
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Compatibility: Pi 5 UPS HAT compatible con Raspberry Pi 5 16GB/8GB/4GB; Modelo: X1205, Matching Case is X1205-C1
Function: X1205 provides max 5.1V 5000mA Power Backup, gestión inteligente y segura de la energía como encendido automático, apagado seguro, apagado de energía y detección de fallos del adaptador de alimentación
Cómo alimentar (3 opciones): 1. 5Vdc via USB Type-C of X1205; 2. 9-18Vdc via DC5521 barril of X1205; 3. 9-18 VDC via XH2.54 conector de X1205 (no incluye cable de alimentación XH2.54)
Batería de 2 celdas 21700: longitud máxima de la batería 70,5 mm, diámetro máximo 21,1 mm (¡no incluye pilas, por favor prepare yourself!)
Lista de embalaje: 1 x X1205 UPS Shield, 4 x CM2.5 x 4 mm screws; no incluye Raspberry Pi 5, pilas o adaptador de alimentación
62,00 € EN AMAZON
raspberry pi 5
raspberry pi ups
ups raspberry pi
electrocookie raspberry pi 5
raspberry pi 5 16gb
torre raspberry pi 5
hat raspberry pi 5
nas raspberry pi 5
raspberry pi 5 desktop
raspberry pi 5 display
#1 GANADOR
