Rpi 5 M.2 Hat
Los 10 mejores productos de mayo de 2025
Última actualización:
24 de mayo de 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
Yahboom
Yahboom Hailo-8L/Hailo-8 AI Acceleration Module,13 TOPS/26 Tops Computing Power,PCIe to M.2 SSD Expansion Board Kit,Compatible with RPi-5 (Hailo-8L 13T AI Hat+ Official Kit)
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Powerful and efficient edge AI acceleration chip: Hailo AI chip has 13TOPS or 26TOPS high-performance AI architecture; typical power consumption is 2.5W; supports multiple data streams, multiple neural networks and multi-chip stacking.
Supports installation of radiator: The official M.2 HAT+ PCIe to M.2 SSD expansion board supports the installation of the official active radiator. The Yahboom M.2 HAT+ PCIe to M.2 SSD expansion board can be stacked on the back and is compatible with various radiator installations.
Efficient AI reasoning architecture: Complete tool chain helps deep neural network models to be deployed quickly and efficiently, using distributed computing and more than 30 patent certifications
Building environment and operating environment: seamless integration with existing deep learning architecture, more than 100 kinds of general free models, AI computing performance through effective use of neural network core resources; pre-trained templates, combined with AI tasks and complete data path applications; real-time runtime library, intuitive API (C/C++/Python)
Hailo's powerful and scalable AI technology enables new features in various market sectors and is widely used in smart cities, assisted driving, industrial fields and digital products.
109,99 € EN AMAZON
GeeekPi
GeeekPi N04 M.2 2280 PCIe to NVMe SSD Shield PiP PCIe Peripheral Board Top for Raspberry Pi 5
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no se requiere soldering.
PCIe x1 interface in both Gen2 & Gen3 estándar. El recorrido corto de PCIe es más fiable y rápido, reuniendo plenamente los requisitos de señal de PCIe 3.0.
Diseño de orificio de ventilación proporciona excelente ventilación de flujo de aire para enfriar; Integrated Voltage Regulator delivering up to 3A for the 3.3V power rail compliant with M.2 (NGFF) estándar.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NO incluido)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminio Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
19,99 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 128GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
83
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
25,95 € EN AMAZON
Waveshare
Waveshare NVMe PCIe To M.2 Hat+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € EN AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat for Raspberry Pi 5, with Official Raspberry Pi 5 Active Cooler, Support M.2 NVMe SSD 2230 2242 2260 2280
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Compatibilidad】Este kit incluye a P33 M.2 NVME M-Key PoE+ HAT y un oficial Raspberry Pi Active Cooler, especialmente diseñado para el último modelo Raspberry Pi 5, un rendimiento óptimo y compatibilidad.
【Alta velocidad NVMe SSD Support】Los soportes de tabla de HAT M.2 NVMe SSDs para accesos y almacenamiento de datos rápidos.
【M.2 Interface】Utiliza la interfaz PCIe para comunicación de alto rendimiento entre SSD y Raspberry Pi.
【PoE HAT Design】Fácil entrega de energía con alimentación a través de Ethernet, eliminando la necesidad de cables adicionales.
【802.3at PoE Support】Requires a 802.3at PoE switch to provide up to 30W of power, ensuring sufficient power for demanding aplications.
【Máxima entrega de energía】 Capaz de delivering up to 25W at 5,1 V/4,5 A, adecuado para alimentar tanto la Raspberry Pi como el NVMe SSD.
39,99 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 Hat Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, MAX Speed 1231 MB/s
Envío gratis
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Waveshare
Waveshare PCIe to M.2 Mini Adapter, Compatible with Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 from Solid State Drive
Envío gratis
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
For reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list. [Connecting To PI5 Via 16PIN Cable]: Based On 16PIN PCIe Interface Of Raspberry Pi 5
[PCIe To M.2 Mini Adapter]: Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
[Compact Size Design]: Practical And Compact, Easily Embedded Into Your Projects
[NVMe Drive Protocol Support]: Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes. Supports Booting PI5 From Solid State Drive
[Onboard Dual LED Indicators]: Easy To Monitor The Working Status
12,99 € EN AMAZON
raspberry pi 5 hat m.2
#1 GANADOR
