main logo

Raspberry Pi Zero W Screen

Los 10 mejores productos de julio de 2025
Última actualización: 11 de julio de 2025
IBest
IBest
2.13inch E-Paper Display Hat V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Envío gratis
star

99

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,90 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Envío gratis
star

97

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#2

  • V4 Latest Version.Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,,but incompatible with Netatmo
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch E-Paper Raw Display V4 Panel 250x122 E-Ink Electronic Paper Screen Without PCB, Embedded Controller Partial Refresh SPI Interface, for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B
Envío gratis
star

94

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • Note:V4 Version,please use corresponding demo code in wiki.This is an E-Ink raw display, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 7,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat (B) V4,212x104 Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi Zero/Zero W/Zero WH/Zero 2W/3B/3B+/4B with SPI Interface
Envío gratis
star

92

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#4

  • Note:Version 3 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing; SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • No backlight, keeps displaying last content for a long time even when power down;Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 23,99 € EN AMAZON
Geekworm
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
star

82

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • 【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
  • 【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
  • 【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
  • 【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
  • 【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
  • 28,00 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.8inch Capacitive Touch Screen LCD For Raspberry Pi 480×640 dpi IPS Display Fully Laminated Toughened Glass Cover Low Power Solution
Envío gratis
star

82

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#6

  • The display orientation is portrait by default, 480×640 resolution (H×V). Change the software config for landscape display.
  • Based on Raspberry Pi 40PIN GPIO header. Driven by Raspberry Pi DPI666 interface, up to 60Hz refresh rate.
  • 4-Points touch control through Raspberry Pi I2C interface.
  • Supports systems like Raspbian, Kali. Supports future version which is backward compatible.
  • Up to 5-points touch,depending on the operating system,up to 6H hardness toughened glass panel, fully laminated screen, better display experience, dust-proof.
  • 39,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Pantalla de 1.3 Pulgadas LCD Hat para Raspberry Pi 4B/3B+/3B/2B/Zero W WH, 240x240 IPS Pantalla RGB 65K Color, Interfaz SPI, con 1x Joystick, 3X Pulsadores
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • 1.3inch LCD Display HAT with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • High definition in small size, 240x240 pixels, RGB 65K display color, with embedded controller, communicating via SPI interface
  • IPS screen, wide viewing angle, better display
  • 1x joystick, 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 17,32 € EN AMAZON
Raspberry Pi
Raspberry Pi
RASPBERRY PI ZERO WH - Ordenador de Sobremesa    
star

76

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • BCM2835 (igual que Pi 1) pero acelerado a 1 GHz, por lo que un 40% más rápido
  • 512 MB de RAM y Mini HDMI
  • Puerto USB On-The-Go
  • LAN inalámbrica 802.11b/g/n y Bluetooth 4.1
  • 32,50 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Envío gratis
star

74

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • V4 Latest Version Ink display, This is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!
  • No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo.
  • Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.
  • 20,99 € EN AMAZON
IBest
IBest
IBest 2.13inch E-Ink Display Hat 250x122 Resolution 3.3V/5V Three-Color e-Paper Display eink Screen for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Jetson Nano,SPI Interface
star

69

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • This is a tri-olor 2.13 inch E-paper Module Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano, Arduino,Nucleo,STM32
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 23,99 € EN AMAZON
raspberry pi zero screen raspberry pi zero 2 w screen raspberry pi w zero raspberry pi zero w raspberry pi zero w usb raspberry pi zero 2w screen raspberry pi zero 2 w raspberry pi zero 2 w+ raspberry pi zero w 2 raspberry pi zero w case