Raspberry Pi Zero 2 W Display
Los 10 mejores productos de octubre de 2025
Última actualización:
7 de octubre de 2025
IBest
2.13inch E-Paper Display Hat V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
20,90 € EN AMAZON
Waveshare
Waveshare 3.5inch Capacitive Touch Display Module, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH// ESP32 / Arduino,320×480 Resolution, IPS Display
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
320×480 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime
Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins
Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
Onboard voltage translator, compatible with 3.3V / 5V operating voltage
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
29,99 € EN AMAZON
Wonrabai
Pantalla táctil IPS de 2 pulgadas compatible con Raspberry Pi 5/4B/3B+/3B/Pi Zero/Zero W/Pi Zero 2W/Pico/Pico W/Pico 2/Pico 2W/ESP32, pantalla LCD táctil capacitiva de resolución de 240 x 320,
94
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Módulo de pantalla táctil capacitiva de 2 pulgadas, pantalla IPS, resolución de 240 × 320, colores de 262 K, efecto de visualización claro y colorido. Alta transmisión de pantalla táctil, respuesta rápida y larga vida útil.
Integrado con chip controlador ST7789T3 y chip de control táctil capacitivo CST816D, utilizando comunicación SPI e I2C respectivamente, minimiza los pines IO necesarios.
Adapta el conector de 15 pines y la ranura FPC de 18 pines para conectar el módulo LCD a la placa host. Traductor de voltaje integrado, compatible con voltaje de funcionamiento de 3,3 V/5 V.
Compatible con Raspberry Pi 5/4B/3B+/3B/Pi Zero/Zero W/Pi Zero 2W/Pico/Pico W/Pico 2/Pico 2W/ESP32/Ardui.
Viene con guía de uso de tutorial en línea y recurso de desarrollo en línea, por favor verifica: n9.cl/8lo09l
22,07 € EN AMAZON
Waveshare
Waveshare 2.15inch e-Paper Hat+ (G), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 296x160, Red/Yellow/Black/White, SPI Interface E-Ink Display with Driver Board
Envío gratis
89
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
25,99 € EN AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
Envío gratis
86
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,00 € EN AMAZON
Raspberry Pi
Raspberry Pi Zero 2 WH
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
CPU Arm Cortex-A53 de cuatro núcleos a 64 bits y 1 GHz
512MB SDRAM
2,4 GHz 802.11 b/g/n LAN inalámbrica
Bluetooth 4.2, Bluetooth Low Energy (BLE), antena integrada
Puerto Mini HDMI y puerto micro USB On-The-Go (OTG)
29,30 € EN AMAZON
GeeekPi
GeeekPi Basic Starter Kit for Raspberry Pi Zero 2 W, with Zero 2 W Aluminum Case, 20Pin GPIO Header, OTG Cable, MicroUSB Switch Cable,Heatsinks, MicroUSB to OTG Cable, HDMI Adapter for Zero 2 W
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Raspberry Pi Zero 2 W Board Included --- The core of the Raspberry Pi Zero 2 W is the RP3A0. With a quad-core 64-bit ARM Cortex-A53 processor clocked at 1GHz and 512MB of SDRAM, Zero 2 W is up to five times as fast as the original Raspberry Pi Zero.
Raspberry Pi Zero 2 W Aluminum Passive Cooling Case --- Made of Aluminum alloy, and Access to all ports of Raspberry Pi Zero 2 W.
Comes with a copper heatsink for better heat dissipation
GPIO header makes it easy to connect the GPIO ports
The Micro USB Power Switch Cable makes it easier for shut down
Package includes: 1x Raspberry Pi Zero 2 W Board;1x Black Aluminum Case with Heatsink;1x Switch Cable;1x OTG Cable;1x HDMI Adapter;1x GPIO Header
39,99 € EN AMAZON
Waveshare
Waveshare 1.44inch LCD Display Hat Compatible with Raspberry Pi Zero Series Boards, 128x128 Pixels Handheld LCD with Embedded Controller, Communicating Via SPI Interface
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface.
Trying to add a control interface for your Pi? Even making the Pi into a handheld game console? This compact display would be the ideal choice.
Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/Zero/Zero W
1x joystick (5-position), 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
17,99 € EN AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat (B) V4,212x104 Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi Zero/Zero W/Zero WH/Zero 2W/3B/3B+/4B with SPI Interface
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Note:Version 3 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano
Ultra low power consumption, basically power is only required for refreshing; SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
No backlight, keeps displaying last content for a long time even when power down;Onboard voltage translator, compatible with 3.3V/5V MCUs
23,99 € EN AMAZON
Wonrabai
Pantalla táctil de 3.5 pulgadas compatible con Raspberry Pi 5/4B/3B+/3B/Pi Zero/Zero W/Pi Zero 2W/Pico/Pico W/Pico 2/Pico 2W/ESP32, pantalla IPS LCD táctil capacitiva de resolución de 320 x 480,
69
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Módulo de pantalla táctil capacitiva de 3.5 pulgadas, resolución de 320 × 480, pantalla IPS, colores de 262 K, efecto de visualización claro y colorido. Alta transmisión de pantalla táctil, respuesta rápida y larga vida útil.
Integrado con chip controlador ST7796S y chip de control táctil capacitivo FT6336U, utilizando comunicación SPI e I2C respectivamente, minimiza los pines IO necesarios.
Ranura para tarjeta TF integrada para almacenar más fotos, videos, música, etc.
Adapta el conector de 15 pines y la ranura FPC de 18 pines para conectar el módulo LCD a la placa host. Traductor de voltaje integrado, compatible con voltaje de funcionamiento de 3,3 V/5 V.
Compatible con Raspberry Pi 5/4B/3B+/3B/Pi Zero/Zero W/Pi Zero 2W/Pico/Pico W/Pico 2/Pico 2W/ESP32/Ardui.
Viene con guía de uso de tutorial en línea y recurso de desarrollo en línea, por favor verifica: n9.cl/3uea1
28,79 € EN AMAZON
raspberry pi zero 2 w
raspberry pi zero 2 w+
raspberry pi zero w 2
raspberry pi zero 2 w usb
raspberry pi zero 2 w power
pi zero 2 w
pi zero w 2
raspberry pi zero 2 w case
raspberry pi 2 zero
raspberry pi zero 2
#1 GANADOR
