Raspberry Pi 5 Pcie 3.0
Los 10 mejores productos de julio de 2025
Última actualización:
12 de julio de 2025
Waveshare
Waveshare PCIe to Gigabit Ethernet and USB 3.2 Gen1 Hat, Compatible with Raspberry Pi 5, 3X USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug and Play
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
For reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list. [Connecting To PI5 Via 16PIN Cable]: Based On 16PIN PCIe Interface Of Raspberry Pi 5
[More USB Capability For Raspberry Pi 5]: Extends The PCIe Interface To 3x High Speed USB 3.2 Gen1 Ports For Connecting More Peripherals
[Extends 1x Gigabit Ethernet Port]: Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Beautiful
[Network Speed Measurement]: Supports Raspberry Pi OS / Ubuntu / OpenWRT, Etc., Stable And Reliable Network Speed
[Onboard Power Monitoring Chip And EEPROM]: Real-Time Monitoring Of Power Status, Supports USB Port Power Control Via Software
42,99 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € EN AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Envío gratis
93
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
39,50 € EN AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield para Raspberry Pi 5
Envío gratis
91
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,00 € EN AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 256GB SSD), M.2 Hat Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Envío gratis
84
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
37,95 € EN AMAZON
db-tronic
Raspberry Pi 5 8GB PCIe M.2 NVMe - Juego | Caja metálica | Enfriador Activo | Placa PCIe SSD M.2 NVMe | Fuente de alimentación Oficial USB-C 27W | 64 GB Edition | Cable HDMI 4K
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
✔ Raspberry Pi 5 con 8 GB de RAM: Diseñado para obtener el máximo rendimiento en aplicaciones como soluciones de servidor, domótica y multimedia.
✔ Placa PCIe SSD NVMe M.2: conecte y utilice fácilmente el almacenamiento NVMe para una transferencia de datos rápida.
✔ Carcasa metálica: Carcasa robusta que combina protección y refrigeración. El refrigerador activo y el sombrero NVMe encajan perfectamente en el estuche.
✔ Active Cooler oficial: Potente ventilador diseñado específicamente para Raspberry Pi 5 para disipar el calor de manera efectiva.
✔ Fuente de alimentación oficial USB-C 27W: Estabilidad y seguridad en la fuente de alimentación para Raspberry Pi y dispositivos periféricos.
✔ Tarjeta de memoria 64 GB: Solución flexible para instalar un sistema operativo de su elección.
✔ Cable Micro HDMI 4K: listo para una salida de vídeo 4K nítida en monitores o televisores compatibles.
✔ Materiales de sujeción y cable plano: Todo está incluido para una instalación suave y segura.
149,90 € EN AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
17,50 € EN AMAZON
db-tronic
Raspberry Pi 5 8GB Starter Kit | 128GB Edition | Fuente de alimentación Oficial USB-C 27W | Carcasa Oficial con Ventilador | Cable Micro HDMI 4K 1 m | Disipador de Calor
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
✔ Raspberry Pi 5 con 8 GB de RAM: Potente computadora de placa única para proyectos y aplicaciones versátiles.
139,90 € EN AMAZON
Raspberry Pi
Raspberry Pi 5 8GB
Envío gratis
71
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Procesador quad-core a 2.4GHz, 64-bit Arm Cortex-A76
GPU VideoCore VII, con soporte OpenGL ES 3.1 y Vulkan 1.2
Dual-band 802.11ac Wi-Fi
Bluetooth 5.0 / Bluetooth Low Energy (BLE)
microSD card slot, con soporte para el modo de alta velocidad SDR104
2 puertos USB 3.0, cada uno soportando hasta 5Gbps simultaneamente
97,13 € EN AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 Hat Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Envío gratis
68
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (104MB/s max) to SSD (PCIe 2.0: 500MB/s max, PCIe 3.0: 1231MB/s max). (Note: Usually unable to reach maximum speed due to various limitations.) (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Compatible SSDs -> M.2 NVMe SSDs are compatible, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280. (Note: NOT compatible with M.2 SATA SSDs.)
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
15,79 € EN AMAZON
raspberry pi 5 pcie
raspberry pi 0
pcie 5.0
raspberry pi 0 1.3 zero
tarjeta raspberry pi 5
#1 GANADOR
