Power Supply Esp32
Los 10 mejores productos de julio de 2025
Última actualización:
12 de julio de 2025
Independently published
ESP32 Essentials: Comprehensive Manual for Modern Embedded Systems
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
Freenove
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield HAT with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Envío gratis
97
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Compatible Models: Freenove ESP32 / ESP32-S3 series (Note: Not compatible with boards from other brands due to different pinout)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Power Circuit: Provide multiple 5V and 3.3V power outputs (5V output up to 3A with external power supply)
Terminal Block and Header: Connect to all pins of ESP32 / ESP32-S3, 2.54 mm (0.1 inch) pitch
12,95 € EN AMAZON
Waveshare
Waveshare ESP32-S3 Eth Development Board with PoE Module and Camera Module,10/100Mbps RJ45 Ethernet Port,Based on ESP32-S3R,Support Wi-Fi and Bluetooth,240MHz Dual Core Processor
Envío gratis
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
ESP32-S3 ETH Development Board with PoE Function,Supports Wi-Fi, Bluetooth, and Ethernet communication, Onboard TF card slot, camera interface and Pico-compatible header
ESP32-S3 Designed for AIoT applications.Powered by Xtensa 32-bit LX7 dual-core processor with frequency up to 240 MHz.Powerful AI Computing Capability & Reliable security features
WIFI and BLE 5 support.ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 b/g/n) with 40 MHz of bandwidth support.Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh
Two power supply methods.Supports both PoE and USB Type-C power supply
for PoE Module, Supports PoE Power Supply.Supports OV2640 / 0V5640 and other mainstream cameras
35,51 € EN AMAZON
TECNOIOT
300W XL4016 DC-DC Max 9A Step Down 5-40V to 1.2-35V Adjustable Power Supply
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【XL4016】El regulador combina la viruta de la regulación del voltaje de la conmutación XL4016 y la rectificación doble de MBR10200, el voltaje de entrada máximo puede ser 40V, voltaje de la salida es ajustable continuamente 1.25-36V.
【Protección múltiple】 protección contra sobrecorriente, sobretemperatura y cortocircuito, etc.
【Fácil instalación】 Este convertidor de CC se puede instalar en el panel: 1. perforar un agujero de 7 mm en el panel; 2. poner la manija del potenciómetro fuera del panel; 3. Bloquee los tornillos e instale la perilla.
【alto rendimiento】 Este regulador de voltaje tiene alta eficiencia de conversión que es hasta 94%, además, se proporciona con frecuencia de conmutación de 180KHz.Nota: La corriente de salida máxima puede ser de hasta 8A y necesita trabajar con el ventilador bajo esta corriente máxima; Se sugiere utilizar corriente dentro de 5A para un uso a largo plazo
【Entrega rápida】 Entrega rápida y de alta calidad de España comprando en TECNOIOT
11,46 € EN AMAZON
Waveshare
Waveshare ESP32-S3-POE-ETH-8DI-8RO(PoE Network Port), Industrial 8-Ch ESP32-S3 WiFi Relay Module, Isolated RS485 Interface, Xtensa 32-bit LX7 2Core Processor, Up To 240MHz, Multi Isolation Protection
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
PoE network port version, with built-in PoE module for PoE capability (compliant with IEEE 802.3af standard). Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance
High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control
Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging
Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal
Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use
69,99 € EN AMAZON
Waveshare
Waveshare ESP32 Servo Driver Expansion Board Built-in WiFi,Dedicated Driver Board Designed for Serial Bus Servos
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Allows controlling up to 253 SC, ST series serial bus servos at the same time (adequate power supply required). Wide range voltage input 6-12V (the input voltage and the servo voltage must be matched).
Built-in WiFi, as well as ESP-NOW support, for remote control and servo debugging. Automatic download circuit for easy uploading programs.
Open source web application and various robot structures. Compact size and space saving, suitable for integration into sorts of space-limited projects.
Note: though one channel UART is able to control up to 253 bus servos, due to the high power of the servos, it is necessary to consider whether the power supply solution is enough when using too many servos.
Note: The input voltage must match the servo voltage, e.g. when using the SC15 Servo with a voltage of 6-8.4V, the input voltage of the DC port of the drive board should also be within the same range of 6-8.4V.
24,99 € EN AMAZON
Waveshare
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module, Onboard RS485 / Pico Hat Interfaces, with Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module
Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. High quality relay, contact rating: ≤10A 250VAC/30VDC. Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard USB Type-C port for power supply, firmware downloading and debugging
Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard digital isolation to prevent interference from external signal
Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Rail-mounted ABS case, easy to install, safe to use
Onboard 40PIN header compatible with some Raspberry Pi Pico HAT, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
43,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3-ETH-8DI-8RO(Common Network Port), Industrial 8-Ch ESP32-S3 WiFi Relay Module, Isolated RS485 Interface, Xtensa 32-bit LX7 2-Core Processor, Up To 240MHz, Multi Isolation Protection
Envío gratis
77
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Common network port version. Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance
High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control
Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging
Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal
Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use
63,99 € EN AMAZON
GeeekPi
GeeekPi Fuente de alimentación por Raspberry Pi 4 18W USB C,Raspberry Pi 4 5V 3.6A Power Supply with On/Off Switch for Raspberry Pi 4 Model B 8GB/4GB/2GB/1GB,con un Adaptador Micro USB para Pi 3B+/3B
Envío gratis
73
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Compatible with Pi4/Pi3B+/3B: GeeekPi Raspberry Pi 4 Power Supply USB-C Power Supply is specially designed and tested for the Raspberry Pi 4; With a Type-C to Micro USB power adapter for Raspberry Pi 3B+/3B.
With Professional Certification: Raspberry Pi 4B Power Supply with CE Certification, GS,TUV and RoHS Certification; Input: 100-240V AC~50/60Hz; Output: 5V 3.6A 18W; Extended Cord: 120cm.
18W 5V 3.6A Power Supply: 5V 3.6A USB C Power Supply will make your Pi work more stable.
With ON/OFF Switch: It's convenient for you to power on and power off your Raspberry Pi 4.
Multi-Protection Functions: Over voltage protection; Under voltage protection; Over temperature protection; Over current protection; Short circuit protection.
Package Includes: 1x 5V 3.6A EU Plug Power Supply with ON/OFF Switch, 1x Micro USB Adapter for Raspberry pi 3B+/3B
11,69 € EN AMAZON
GeeekPi
GeeekPi DC 5V 4A Fuentes de Alimentación Adaptador para Raspberry Pi X820/X825 SATA Expansion Board/ X700 UPS/ X720/ X735 Power Management Board/Jetson Nano/X822/X852/T300/T100/T200/X750
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Para productos jetson nano y series X820 o tiras led
Con TUV, FCC, RoHS, certificaciones CE
ENTRADA: 100-240VAC ~ 50 / 60Hz; SALIDA: DC5V / 4A
Con enchufes estándar cambiables de EE. UU. / Reino Unido / UE
El paquete incluye: 1 x fuente de alimentación de 5V / 4A, 1 x enchufe estándar cambiable de EE. UU., 1 x enchufe estándar cambiable del Reino Unido, 1 x enchufe estándar cambiable de la UE
15,99 € EN AMAZON
esp32 power supply
esp32 power
power supply
1000w power supply
power supply 1000w
power supply 60v
power supply battery
truetone power supply
usb power supply
asus power supply
#1 GANADOR