Power For Esp32
Los 10 mejores productos de julio de 2025
Última actualización:
11 de julio de 2025
JZK
JZK ESP32 Tablero de Desarrollo ESP-WROOM-32 ESP-32 ESP-32S 2.4GHz WiFi + Bluetooth Modo Dual Módulo de Antena con Ultra Low Power
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
El ESP-WROOM-32 es un módulo de uso general Wi-Fi + BT + BLE MCU potente y versátil que se puede utilizar para redes de sensores de bajo consumo y tareas exigentes como codificación de voz, transmisión de audio y decodificación de MP3, etc.
El chip de modo dual Wi-Fi más Bluetooth de 2,4 GHz es confiable, escalable y adaptable. Se pueden controlar o alimentar dos núcleos de CPU individualmente.
Pequeño volumen, fácil de integrar con otros productos. ESP32 integra interruptores de antena, baluns de RF, amplificadores de potencia, amplificadores de bajo ruido, filtros y módulos de administración de energía. La solución completa ocupa el área más pequeña de la placa de circuito impreso.
El usuario puede apagar la CPU y utilizar el coprocesador a baja potencia para monitorear continuamente el estado de los periféricos o si algunos de los valores analógicos exceden el umbral.
ESP32 también integra una gran cantidad de periféricos, incluidos sensores táctiles capacitivos, sensores Hall, sensores de bajo ruido, interfaz de tarjeta SD, interfaz Ethernet, SDIO/SPI de alta velocidad, UART, I2S e I2C.
7,99 € EN AMAZON
Freenove
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield HAT with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
Compatible Models: Freenove ESP32 / ESP32-S3 series (Note: Not compatible with boards from other brands due to different pinout)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Power Circuit: Provide multiple 5V and 3.3V power outputs (5V output up to 3A with external power supply)
Terminal Block and Header: Connect to all pins of ESP32 / ESP32-S3, 2.54 mm (0.1 inch) pitch
12,95 € EN AMAZON
LILYGO
LILYGO T-ETH-Lite ESP32-S3 W5500 Módulo de placa de desarrollo Ethernet TTGO ESP32-S3-WROOM compatible con TF expandible Power POE Shield
94
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
Memoria: flash: 16 MB, PSRAM: 8 MB
【MCU】ESP32-S3-WROOM-1
Escudo: POE/protector de cámara
Inalámbrico: Wi-Fi: 802.11 b/g/n, BLE 5 + malla Bluetooth
Github: github.com/Xinyuan-LilyGO/LilyGO-T-ETH-Series
28,00 € EN AMAZON
TECNOIOT
Camera Module ESP32-CAM Bluetooth Module WiFi Board Development ESP32 OV2640 (Camera Included)
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
【ESP32-CAM】 ESP-32CAM se puede usar en varias aplicaciones de IoT. Es adecuado para dispositivos domésticos inteligentes, control inalámbrico industrial, monitoreo inalámbrico, identificación inalámbrica QR, señales de sistema de posicionamiento inalámbrico y otras aplicaciones IoT. Es una solución ideal para aplicaciones de IoT.
【Diseño compacto】 ESP-32CAM está empaquetado en DIP y se puede conectar directamente al panel posterior para una producción rápida. Proporciona a los clientes un método de conexión altamente confiable y es conveniente para su uso en varios terminales de hardware IoT.
【Alto rendimiento】 Módulo de conexión Wi-Fi + BT / BLE ultra pequeño 802.11b / g / n; CPU de 32 bits de bajo consumo y doble núcleo para procesadores de aplicaciones; Hasta 240MHz, hasta 600 DMIPS; SRAM incorporado de 520 KB, PSRAM externo de 4M.
【Compatible】 Admite interfaces como UART / SPI / I2C / PWM / ADC / DAC; Admite cámaras OV2640 y OV7670 con flash incorporado; Imagen de soporte de carga WiFi Tarjeta de apoyo TF; Soporta múltiples modos de suspensión.
【Datasheet and Resource】https://amzn.to/2MmturO
11,66 € EN AMAZON
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B, 800×480, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, with Onboard Antenna
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation
Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Onboard voltage regulator, supports 7~36V wide range power supply
Onboard RTC chip and rechargeable battery holder to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and battery recharging status
Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
53,99 € EN AMAZON
YUNIQUE GREEN-CLEAN-POWER
YUNIQUE GREEN-CLEAN-POWER - Juego de 4 Baterías de Litio Recargables 3.7V 1000mAh 802540 | con Tarjeta Protectora | para ESP32, Arduino, Nodemcu, Modelismo, Plata | 26x44x9 mm - 16,40 g
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
🔋 **Energía Sostenible al Alcance de tu Mano**: Con la batería recargable de litio YUNIQUE GREEN-CLEAN-POWER de 3.7V y 1000mAh, disfruta de una fuente de energía confiable y duradera para tus proyectos de desarrollo con WiFi ESP32 y Arduino Nodemcu. Ideal para alimentar tus innovaciones sin preocuparte por la duración de la batería
🌐 **Conectividad Sin Límites**: Esta batería es perfecta para aquellos que buscan explorar el mundo del Internet de las Cosas (IoT). Con una corriente de funcionamiento máxima de 1A, es la compañera ideal para proyectos que requieren una conexión constante sin demandar altas corrientes, asegurando un rendimiento óptimo y una larga vida útil
⚡ **Carga Eficiente y Rápida**: Olvídate de las largas esperas. Con opciones de recarga estándar y rápida, esta batería se adapta a tu ritmo de vida. Recarga estándar en 8 horas (0.2C) o si necesitas velocidad, opta por la recarga rápida en solo 2.5 horas (0.5C), manteniendo tus proyectos en movimiento sin interrupciones
📏 **Diseño Compacto y Ligero**: Con dimensiones de 26X44X9 mm y un peso de solo 16,40 gramos, esta batería se integra perfectamente en cualquier diseño, desde prototipos de electrónica hasta pequeños dispositivos IoT, ofreciendo una solución de energía potente sin sacrificar espacio ni comodidad
🛡️ **Seguridad Garantizada**: Equipada con una placa protectora, la batería YUNIQUE GREEN-CLEAN-POWER ofrece una experiencia de uso segura, protegiendo tus proyectos contra sobrecargas, descargas excesivas y cortocircuitos. Disfruta de la tranquilidad de saber que tu creatividad está respaldada por una fuente de energía fiable y segura
28,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3 Eth Development Board, 10/100Mbps RJ45 Ethernet Port, Wi-Fi & BT Support, 240MHz Dual Core Processor, Onboard Type-C Port and TF Card Slot, PoE Module
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
There are several options for this item, this option comes with a PoE module. For more package content details, please check the image 2
Adopts ESP32-S3R8 high-performance chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, with an onboard antenna. Supports switching to use external antenna
Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Optional for PoE module to realize Power over Ethernet function (IEEE 802.3af-compliant)
Onboard camera interface, compatible with OV2640, OV5640 and other mainstream cameras for image and video capture. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
Onboard TF card slot for external TF card storage of pictures or files. Compatible with Pico header, onboard multiple peripheral interfaces, offering strong compatibility and expandability
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
31,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3-ETH-8DI-8RO(Common Network Port), Industrial 8-Ch ESP32-S3 WiFi Relay Module, Isolated RS485 Interface, Xtensa 32-bit LX7 2-Core Processor, Up To 240MHz, Multi Isolation Protection
Envío gratis
76
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Common network port version. Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance
High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control
Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging
Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal
Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use
63,99 € EN AMAZON
Waveshare
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module, Onboard RS485 / Pico Hat Interfaces, with Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case
Envío gratis
72
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module
Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. High quality relay, contact rating: ≤10A 250VAC/30VDC. Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard USB Type-C port for power supply, firmware downloading and debugging
Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard digital isolation to prevent interference from external signal
Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Rail-mounted ABS case, easy to install, safe to use
Onboard 40PIN header compatible with some Raspberry Pi Pico HAT, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
43,99 € EN AMAZON
Waveshare
Waveshare ESP32-S3-POE-ETH-8DI-8RO(PoE Network Port), Industrial 8-Ch ESP32-S3 WiFi Relay Module, Isolated RS485 Interface, Xtensa 32-bit LX7 2Core Processor, Up To 240MHz, Multi Isolation Protection
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
PoE network port version, with built-in PoE module for PoE capability (compliant with IEEE 802.3af standard). Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance
High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control
Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging
Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal
Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use
69,99 € EN AMAZON
esp32 power
power for all
power for alliance
sensor for esp32
power bi for
bosch power for all
power bank for pc
power bank for samsung
power bank for camping
power bank for macbook
#1 GANADOR
