Hc-x1500e: 10 mejores de junio de 2025

▼ Mostrar más▲ Mostrar menos

【Easy operation-1】 1. Sensing module for about a minute after power initialization time, during the interval to the output module 0-3 times a minute in standby mode. 2. Should avoid direct lighting such as interference sources close the surface of the lens module so as to avoid the introduction of interference signal generator malfunction; use of the environment to avoid the flow of the wind, the wind sensor will also cause interference.
【Easy operation-2】3. Sensor module using a dual probe, the probe's window is rectangular, dual (A per B million) in the direction of the ends of long, when the body passed from left to right or right to left when the reach the dual IR time, distance difference, the greater the difference, more sensitive sensors, when the body from the front to the probe or from top to bottom or from bottom to top direction passing, dual IR not detected changes in the distance.
【Easy operation-3】so the sensors should be installed dual direction of the probe with human activities as much as possible parallel to the direction of maximum to ensure that the body has been passed by the dual sensor probe. To increase the sensing range of angles, the module using a circular lens, the probe also makes sense on all four sides, by the above installation requirements.VCC, trig (control side), echo (receiving end), GND.
【Easy operation-4】5, with induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a "sensor output time" and "blocking time" the interval between the work produced can be applied to detect the interval Products .
【Easy operation-5】6, the working voltage range: the default voltage DC4.5V-20V. 7, micro-power consumption: static current "50 microamps, especially for battery-powered automatic control products. !!Note!!: The potentiometer clockwise to adjust the distance, sensing range increases (about 7 meters), on the contrary, sensing range decreases (about 3 meters).Delay adjustment potentiometer clockwise rotation, sensor delay longer (about 300S), the other hand, induction by the short delay (about 5S)
7,76 € EN AMAZON

Hc-x1500e

Los 10 mejores productos de junio de 2025

Última actualización: 3 de junio de 2025

Panasonic

Panasonic HC-X1500E - Videocámara 4K (lente Leica, Live Streaming, gran angular 25 mm, zoom óptico de 24x, Wifi), negro

99

CALIDAD MÁXIMA

Amazon.es

Navitech

Navitech Trípode De Aluminio Ligero - Compatible con la Panasonic HC-X1500E Camcorder

96

CALIDAD SUPERIOR

Amazon.es

ELEGOO

ELEGOO Sensor Ultrasonidos HC-SR04 Kits de Sensores de Distancia por Ultrasonidos Compatible con R3 Mega, Hoja de Datos Disponible para Descargar para Arduino

92

CALIDAD EXCELENTE

Amazon.es

OcioDual

OcioDual Módulo HC-SR04 Sensor de Ultrasonidos Medidor Distancia Medición Ultrasónico HCSR04 Compatible con Raspberry Pi AVR DIY

91

CALIDAD DISTINGUIDA

Amazon.es

Aihasd

Aihasd 3 Piezas HC-SR04 Módulo de sensores ultrasónicos Sensores de distancia Ultrasonic Distance Sensor Para Arduino

84

CALIDAD FIABLE

Amazon.es

DollaTek

DollaTek 5pcs SR501 módulo de Sensor Humano piroeléctrico infrarrojo PIR Motion Detector módulos

81

CALIDAD BUENA

Amazon.es

CELLONIC

CELLONIC, Batería para Cámara Compatible con Panasonic HC-X2000, HC-X1500, HC-X1, AG-DVX200 (7.4V, 4400mAh) 2 Unidades

81

CALIDAD BUENA

Amazon.es

TECNOIOT

2pcs SR501 HC-SR501 HCSR501 Adjust IR Motion Sensor

75

CALIDAD BUENA

Amazon.es

AZDelivery

AZDelivery 5 x HC de módulo ultrasónico hc-SR04 telémetro Sensor Compatible con Arduino y Raspberry Pi con eBook Incluido

70

CALIDAD BUENA

Amazon.es

mtb more energy

Batería NP-FH100 Compatible con Sony HDR-CX520, HC3, HC5, HC7, HC9, SR5, SR7, SR8, SR10, SR11, SR12

68

CALIDAD BUENA

Amazon.es