main logo

Gnss Raspberry

Los 10 mejores productos de octubre de 2025
Última actualización: 9 de octubre de 2025
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,89 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G Hat (B) for Raspberry Pi Supports LTE Cat-4 4G/3G/2G GNSS Positioning Global Band
Envío gratis
star

96

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#2

  • 4G HAT FOR RASPBERRY PI,Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning,Based on SIM7600G-H, Global Band
  • Suitable For Raspberry Pi / PC,Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
  • Global Band 4G / 3G / 2G Support,Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network
  • USB HUB Feature,Onboard USB HUB Chip With USB2.0/1.1 Compliant, Providing 2x USB-A Connector And 1x USB Solder Pad
  • GNSS Positioning,Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Telephoto Call & SMS Support,Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
  • 96,99 € EN AMAZON
Waveshare
Waveshare
gsm GPRS GNSS Bluetooth Hat Module for Raspberry Pi, SIM868 Quad-Band GPS Tracker Expansion Board Compatible with Arduino, for SMS Call Data Transfer Navigation IoT Projects
star

94

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • ✅ All-in-One GSM GPRS GNSS Bluetooth Functionality: This HAT module for Rasp-berry Pi supports GSM, GPRS, GNSS (GPS/Glonass/Compass/LBS), and Bluetooth 3.0 connectivity, ideal for wireless IoT, SMS, call, and tracking applications.
  • 🍓 Quad-Band GSM with Data & Voice Capabilities: Supports GSM 850/900/1800/1900MHz bands with features like SMS, phone call, GPRS data transfer, and voice encode/decode, perfect for global cellular communication use cases.
  • 📡 High Precision GPS & GNSS Positioning: Built-in GNSS receiver offers <2.5m horizontal accuracy with fast cold/hot start times, making this GPS module for Raspberry Pi great for real-time navigation and tracking solutions.
  • 🔧 Raspberry Pi & Arduino Compatible Plug-and-Play HAT: Designed with standard 40PIN GPIO for easy integration with Rasp-berry Pi boards, also supports Ar-duino and STM32 via AT commands, ideal for versatile development and prototyping.
  • 🔋 Built-in USB to UART & RTC for Stable Performance: Features onboard CP2102 USB-to-UART converter, SIM card slot, RTC with backup battery, and LED status indicators to ensure robust GSM GPRS GNSS Bluetooth connectivity and reliable operation.
  • 30,00 € EN AMAZON
Waveshare
Waveshare
Waveshare SX1262 868/915M LoRaWAN Node Module, LoRaWAN/GNSS Expansion Board for Raspberry Pi, with L76K Module, Sucker Antenna and GPS Antenna, Suitable for HF Band, for LoRaWAN Networks Building
Envío gratis
star

92

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#4

  • [SX1262 868/915M LoRaWAN/GNSS HAT]Suitable for HF band, comes with a magnetic CB antenna, a GPS antenna and IPEX adapter cables (2PCS)
  • This series of products are LoRa modules using the new generation of SX1262 RF chip, features higher power efficiency, longer communication distance and stronger anti-interference than SX1278. Suitable for Sub-GHz frequency band network, and is available in HF (850~930MHz) frequency band. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network
  • In addition to the basic LoRaWAN, it also onboards L76K module with GPS/BD support, provides accurate clock and location info for node module. Onboard button cell holder, supports ML1220 rechargeable cell(not included), for preserving ephemeris information and hot starts
  • Standard Pi 40PIN GPIO header, compatible with Raspberry Pi series boards. Onboard 4 LED indicators for module operating status
  • Provide complete supporting documentation manuals (C example programs and user manuals, etc.). Please contact our 24-hour customer service through 'buyer/seller message' to obtain relevant manuals
  • 36,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi gsm/GPRS/GNSS Hat Expansion Board with Low-Power Consumption Based on SIM868 Compatible with Raspberry Pi 2B 3B Zero Zero W
star

88

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#5

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning;Supports data transferring.
  • Onboard USB TO UART converter CP2102 for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder;Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);
  • Supports SIM application toolkit: GSM 11.14 Release 99;
  • 39,99 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H M.2 4G Hat for Raspberry Pi LTE CAT4 High Speed Global Coverage Multi Band 4G/3G/2G Communication and GNSS Positioning
star

82

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#6

  • Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
  • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Aduino
  • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
  • Onboard audio jack and audio decoder, allows audio operation like making phone call. High efficiency power supply circuit, up to 3A output current
  • 107,99 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G Hat, Global Band, Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning, Compatible with Raspberry Pi and PC
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • Connected via pogo pin or MicroUSB connector. Dedicated pogo pin for Raspberry Pi Zero/Zero W. MicroUSB connector for other Raspberry Pi boards or PC.
  • Incorporates SIM7600G-H global band 4G module, for 2G/3G/4G network with global support. USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access.
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning. SIM card slot, supports 1.8V/3V SIM card.
  • Onboard audio jack and audio decoder for making telephone call. 2x LED indicators, easy to monitor the operating status. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT. Comes with development resources and online user manual (examples for Raspberry Pi).
  • 96,99 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G Hat, Supports LTE Cat-4 4G/3G/2G, GNSS Positioning, Global Band, Compatible with Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero/Jetson
star

77

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard USB to UART converter, for serial debugging
  • Onboard audio jack and audio decoder for making telephone call. 2x LED indicators, easy to monitor the operating status. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 96,99 € EN AMAZON
Waveshare
Waveshare
Waveshare SIM7600E-H 4G-Module, Used for Windows/Linux Dial-up Internet Access, Cloud Platform Communication, GNSS Locating, Compatible with Raspberry Pi/Jetson Nano/ESP32/STM32 Programming Platforms
Envío gratis
star

73

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • Typical application: Used for Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture. With 3× IPEX antenna connector, comes with 2× yellow pin header and FPC antenna. Applicable regions: Europe/Southeast Asia/West Asia/Africa/China/Korea
  • Compatible with 2G/3G/4G network with global support. Supports dial-up, telephone calls, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, etc. Supports GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc
  • Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header. Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility. Built-in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32
  • Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery). Supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use
  • Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 67,99 € EN AMAZON
Waveshare
Waveshare
Waveshare NEO-M8T GNSS Timing Hat for Raspberry Pi Multi-Constellation Receiver Support Single-Satellite Timing Feature
star

66

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • Precise timing feature, high availability even with one single satellite. High dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption
  • Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity
  • Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing. Supports U-Center, an easy way to config the module. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Supports DDC (I2C compliant) interface: up to 400KHz (max)
  • Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. 4x LEDs for indicating the module operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 106,99 € EN AMAZON
gnss