main logo

Esp32 S3 Display

Los 10 mejores productos de mayo de 2025
Última actualización: 24 de mayo de 2025
Waveshare
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Display Development Board, 240x320, IPS, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Onboard Antenna
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
  • Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 37,99 € EN AMAZON
Binghe
Binghe
ESP32-S3 con Pantalla de 1,9" LVGL Binghe ESP32-S3 ESP32 Display Tarjetas de Desarrollo con Pantalla Inteligente de 170 * 320 Módulo LCD TFT WiFi + Bluetooth 8M PSRAM 16M Flash Compatible con Arduino
Envío gratis
star

97

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#2

  • 【Potente procesamiento】：Desbloquee el potencial de sus proyectos con la placa de desarrollo Binghe ESP32-S3 LVGL, que incorpora un robusto procesador Xtensa LX7 de 32 bits de un solo núcleo a una frecuencia de hasta 240 MHz, que satisface las demandas de aplicaciones complejas.
  • 【Conectividad inalámbrica】：Conecte y controle a distancia sus dispositivos sin problemas con los módulos WiFi y Bluetooth integrados, compatibles con redes inalámbricas IEEE 802.11 b/g/n de 2,4 GHz y protocolo Bluetooth 5.0.
  • 【Vibrante pantalla LVGL ESP32】：Experimente imágenes nítidas y vivas con la pantalla LVGL de 1,9 pulgadas con una resolución de 170*320, ideal para mostrar diversas interfaces gráficas e interactivas.
  • 【Módulo TFT】：ESP32-S3 con pantalla de 1,9 pulgadas Placa de desarrollo LVGL Aprovechando la tecnología TFT (Thin Film Transistor), disfrute de tiempos de respuesta rápidos, colores vibrantes y alto contraste, permitiendo una visualización de imágenes y vídeo de alta calidad.
  • 【Desarrollo conveniente】：Facilitando el rápido desarrollo y personalización de ESP32, esta placa de desarrollo es compatible con la biblioteca de gráficos LVGL, ofreciendo una plétora de controles de interfaz gráfica y efectos de animación.
  • 17,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.47inch LCD Display Development Board, 72×320, 262K Color, Dual-Core Processor Up to 240MHz Frequency, Supports WiFi & BLE 5, with Colorful RGB LED, ESP32 with Display
Envío gratis
star

96

CALIDAD SUPERIOR

VER EN AMAZON
Amazon.es
#3

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BlE 5 (LE), with onboard antenna
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.47inch LCD display, 172×320 resolution, 262K color
  • Adapting multiple IO interfaces, integrates full-speed USB port Onboard TF card slot for external TF card storage of pictures or files
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects
  • ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
  • 20,99 € EN AMAZON
LILYGO
LILYGO
LILYGO T-Display-S3 ESP32-S3 - Placa de desarrollo TTGO con pantalla LCD normal con carcasa
star

88

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • Flash: 16 MB PSRAM: 8 MB
  • Características: montado con carcasa negra
  • MCU: microprocesador LX7 de doble núcleo ESP32-S3R8
  • Pantalla: pantalla LCD ST7789 de 1.9 pulgadas de resolución de 170 x 320, y se ha añadido una placa acrílica para fijarlo.
  • Más información: github.com/Xinyuan-LilyGO/T-Display-S3
  • 32,00 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.69inch Touch Display Development Board, 240×280 Pixels, 262K Color, Compact Size, Micro LCD Display with ESP32-S3, Accelerometer and Gyroscope Sensor
Envío gratis
star

83

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240X280 pixels 262K capacitive touch display for clear color pictures. Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
  • Onboard RST, BOOT and a programmable PWM button for easy custom function development. Onboard 3.7V MX1.25 lithium battery recharge/discharge header. High touch screen transmittance, fast response and long lifetime
  • Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 32,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4inch Capacitive Touch Display Development Board, 480×480, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi, with Onboard Antenna
Envío gratis
star

82

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#6

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color
  • Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
  • 46,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B, 800×480, 5-Point Touch, 32-bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, with Onboard Antenna
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation
  • Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Onboard voltage regulator, supports 7~36V wide range power supply
  • Onboard RTC chip and rechargeable battery holder to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and battery recharging status
  • Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
  • 53,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.1inch LCD Capacitive Touch Round Display Development Board, 480×480 IPS Screen I2C Touch Panel with 32-bit LX7 Dual-Core Processor, Supports 2.4GHz WiFi & BLE 5, 262K Color
Envío gratis
star

74

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • Onboard 2.1inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.1inch capacitive touch display, 480×480 resolution, 262K color
  • Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Supports touch control via I2C interface, with interrupt support
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • Rich WiKi Resources We provide official Wiki resources, please contact us for more information.
  • 45,99 € EN AMAZON
APKLVSR
APKLVSR
APKLVSR ESP32 S3 ESP32 Display,ESP32 S3 Desarrollo Placa de Desarrollo 7 Pulgadas Módulo TFT Pantalla táctil WiFi + Bluetooth ESP32 S3 Pantalla Compatible con Arduino/LVGL
Envío gratis
star

72

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • La placa de desarrollo ESP32-8048S070 se basa en el controlador ESP32-S3, una CPU de doble núcleo con bajo consumo de energía, una frecuencia de reloj de hasta 240 MHz e integra una gran cantidad de periféricos de recursos, SDIO de alta velocidad, SPI, UART y otras funciones
  • La placa de desarrollo de pantalla ESP32 S3 es una verdadera herramienta de desarrollo de Internet de cosas con una pantalla de visualización controlable que se puede utilizar para el control remoto de la aplicación, la recopilación remota de datos ambientales, la fusión remota de datos, la configuración remota de parámetros y otras aplicaciones de desarrollo de loT
  • Esta pantalla táctil ESP32-S3 de 7 pulgadas ESP32 de 7 pulgadas con una resolución de 800 x 480 ofrece imágenes de alta resolución, lo que es muy adecuado para crear una interfaz de aplicación que cumpla con sus propias necesidades.
  • Soporte: ①UART/SPI/I2C/PWM/ADC/DAC y otras interfaces②Cámaras OV2640 y OV7670, flash integrado③Carga WiFi de imagen④Tarjeta TF⑤Múltiples modos de sueño。 Modo de trabajo integrado Lwip y FreeRTOS STA/AP/STA+AP Configuración de red con un solo clic. Desarrollo secundario
  • Aplicación: Pantalla ESP32 para transmisión de imágenes de dispositivos inteligentes domésticos, monitoreo inalámbrico, agricultura inteligente, identificación inalámbrica QR, señales de sistemas de posicionamiento inalámbricos y otras aplicaciones de IoT
  • 58,99 € EN AMAZON
LILYGO
LILYGO
LILYGO TTGO T-Display-S3 ESP32-S3 1.9 " ST7789 LCD Display Development Board Weld Pin Joint Version
29% Descuento
star

68

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • MCU: RP2040 Dual ARM Cortex-MO+ FLASH: 4 MB
  • Lenguaje de programación: C/C++, MicroPython Support Machine Learning Biblioteca TensorFlow Lite
  • Tipo de conexión: JST GH 1,25 mm, compatible con USB/Li-Po batería dual fuente de alimentación JST, soporte de biblioteca de aprendizaje automático TensorFlow Lite
  • Github:github.com/Xinyuan-LilyGO/T-Display-S3
  • "Useful Electronics": youtube.com/watch?v=88MwR-4Dy0Q
  • 27,00 € EN AMAZON
display esp32 esp32 display lilygo t-display-s3 esp32-s3 esp32 s3 esp32-s3 esp32 lora display esp32 lcd display t display s3 esp32 display touch