main logo

Emisora Fpv Elrs

Los 10 mejores productos de julio de 2025
Última actualización: 16 de julio de 2025
BETAFPV
BETAFPV
BETAFPV ELRS LiteRadio 3 Radio Transmitter RC Controller, Support FPV Simulator, Joystick Calibration, USB Charging, Compatible for RC Models Like Multirotor Airplane FPV Drone Quadcopter - Mode 2
Envío gratis
star

95

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • 【Nano Joystick Gimbal】 LiteRadio 3 has a newly designed Joystick Gimbal. With ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
  • 【Up to 15Hours】Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
  • 【BETAFPV Configurator Supported】LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy and convenient, further fulfilled your different fly requirement
  • 【FPV Simulator Supported】LiteRadio 3 is ergonomic and has the shape of a gaming controller. The rubber coat is comfortable to hold, and the anti-slip texture on the handles allows for a solid grip. It has the function of an FPV simulator which can act as a USB Joystick when connected to a PC, and supports most of the simulators on the market with a comprehensive configuration
  • 【Please Note】The default firmware of the LIteRadio 3 Radio Transmitter (ELRS 2.4G) has been ELRS V3 since Nov 2023 instead of the previous version ELRS V2.0. LiteRadio 3 Radio Transmitter ELRS V3 no longer supports an external TX Module ! ! !
  • 54,99 € EN AMAZON
BETAFPV
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Envío gratis
star

91

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • 【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
  • 【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
  • 【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
  • 【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
  • 【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
  • 28,99 € EN AMAZON
BETAFPV
BETAFPV
BETAFPV LiteRadio 3 RC Radio Transmitter with Nano Module Bay for External TX Module Support Simulator Joystick Calibration Firmware Update for RC Models Multirotor Airplane Drone - Frsky Mode 2
Envío gratis
star

87

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • 【Nano Joystick Gimbal】 LiteRadio 3 has a newly designed Joystick Gimbal. With ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it is long longevity up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
  • 【Nano Module Bay】LiteRadio 3 reserved a nano bay on the backside, it supports CRSF protocol external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available
  • 【Long Use Time】Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
  • 【BETAFPV Configurator Supported】LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy and convenient, further to fulfilled your different fly requirement
  • 【FPV Simulator Supported】LiteRadio 3 is ergonomic and has the shape of a gaming controller. Adopted the rubber coat, comfortable to hold, and the anti-slip texture on the handles allow for a solid grip. It has the function of FPV simulator which can act as a USB Joystick when connected to PC, supports most of the simulators on market with comprehensive configuration
  • 54,99 € EN AMAZON
BETAFPV
BETAFPV
BETAFPV ExpressLRS Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone V1.2
Envío gratis
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • Updated: Building on the open-source ExpressLRS framework – renowned for delivering ultra-low latency, blistering speeds, and exceptional range – the upgraded Lite Receiver flat antenna V1.2 now features an extra-thin 3mm board, an ultra-lightweight 0.46g design, and enlarged soldering pads. Optimised impedance matching elevates signal reliability and sensitivity, enabling 300m range at 25mW transmitter power and up to 1000m at 50mW, pushing the boundaries of long-range potential in micro-sized receivers
  • Enhanced Signal Reliability & Sensitivity: The flat antenna V1.2’s optimised impedance matching unlocks a transformative leap in signal reliability and sensitivity. Where the original flat antenna V1.1 achieved 500-600m at 50 transmitter power/500Hz, the V1.2 now delivers a robust 1000m under identical conditions, alongside superior signal consistency. This precision-tuned design minimises packet loss during high-speed manoeuvres and enhances low-power efficiency, ensuring crisp responsiveness at 25 (300m range) and unwavering stability at max output
  • Lightweight Design, Simplified Installation: In response to community feedback, the flat antenna V1.2 now features enlarged soldering pads designed to simplify installation and reduce errors – a critical upgrade for both novices and seasoned builders. Combined with a 13.2% weight reduction (now just 0.46g), the updated design retains its compact footprint while shedding unnecessary mass, freeing up crucial weight budgets for performance-focused builds
  • Flat Antenna: The Lite Receiver flat antenna V1.2 boasts a 3mm ultra-thin board and 0.46g lightweight design, perfect for space-limited drones. Its low-profile, crash-resistant build offers greater durability than traditional tower antennas. The V1.2’s optimised impedance matching enhances signal reliability and sensitivity, extending its range to 1,000m. This upgrade focuses on refining the flat antenna’s crash resistance, providing pilots with unmatched range and durability in a compact form
  • Note: Now the firmware version of Lite Receiver flat antenna V1.2 is ELRS 3.3.0; ELRS Innovative team has officially released version 3.3.0. If you want to flash official ELRS firmware, please download the latest ExpressLRS-Configurator or read our manual for flashing it. Significantly, the TX module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully
  • Configuration & Bind: ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. For more binding details, please refer to manual or the product picture
  • 16,99 € EN AMAZON
BETAFPV
BETAFPV
BETAFPV ExpressLRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Simulator Joystick Calibration - Mode 2 Left Throttle
Envío gratis
star

81

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • 【Connect with the Computer】This radio transmitter isn't compatible with Windows 11/Windows 10 systems running on AMD CPUs, please check your computer CPUs first when you want to connect it with the computer to play the simulator, setting or connect with the BETAFPV Configurator
  • 【Update】This transmitter supports updating the firmware, operating the Joystick Calibration, or setting up by using BETAFPV self-developed LiteRadio System BETAFPV Configuration, full function of the ExpressLRS configuration, and Channel mixer for fixed wing drones
  • 【Firmware Version】This LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same firmware version and then could be bound together
  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE
  • BETAFPV Configurator】This transmitter supported BETAFPV Configuration with the function of radio controller setup, checking your computer CPUs before connect with it
  • 44,99 € EN AMAZON
Dgayaeic
Dgayaeic
Drone Receiver, 2.4GHz Express LRS ELRS EP1 TCXO Long Range Low Latency Receiver, Receiver Long Range Low Latency Receiver with UFL T Antenna For FPV Drone FPV Racing Drone Quadcopter
star

70

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • High Refresh Rate for Smooth Control: This ELRS receiver an high refresh rate, providing seamless, real-time communication between your remote control and drone. Ideal for racing quadcopters, it ensures smooth, responsive control, which is critical during high-speed maneuvers and racing events.
  • Long Range Performance: With a 915MHz frequency (or optional 2.4GHz) signal, this ExpressLRS receiver provides an impressive long-range connection. Whether you’re racing through large tracks or flying over vast distances, you can count stable and communication, extending your experience without interruptions.
  • T-Type Antenna for Enhanced Signal Reception: Equipped with a T-type antenna, this receiver signal reception and a more stable connection. The unique antenna design improves signal strength, reducing the risk of signal dropouts and interference, especially in challenging environments with obstacles or long-distance flights.
  • WiFi Upgrade Support for Enhanced Functionality: The receiver supports WiFi upgrades, making it easy to update firmware and fine-tune settings via a wireless connection. This ensures your receiver is always up to date with the latest performance enhancements, boosting overall functionality and experience.
  • Perfect for Racing and High-Performance Drones: Designed specifically for racing quadcopters and high-performance drones, this ELRS receiver fast response times and connectivity. Whether you're racing tracks or exploring freestyle maneuvers, this receiver ensures precise control, stable signal transmission, and minimal latency, making it an component for any competitive drone racer.
  • 17,19 € EN AMAZON