main logo

E Paper Display

Los 10 mejores productos de mayo de 2025
Última actualización: 24 de mayo de 2025
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Hat Display Module, 800×480 Resolution, Supports Black/White 2 Colors, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Envío gratis
star

99

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 69,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#2

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Raw Display Panel (B) 800x480 Resolution E-Ink Electronic Paper Screen Without PCB Support Red Black and White Three-Color and White SPI Interface
Envío gratis
star

95

CALIDAD EXCELENTE

VER EN AMAZON
Amazon.es
#3

  • INTERFACE:3-wire SPI, 4-wire SPI; OUTLINE DIMENSIONS:170.2 × 111.2 × 1.18mm; FULL REFRESH TIME:26s; DISPLAY SIZE:163.2 × 97.92mm ; DOT PITCH:0.205 × 0.204mm; VIEWING ANGLE:>170°.
  • Low power consumption, basically power is only required for refreshing.Wide viewing angle, paper-Like displaying without electricity
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags,industrial instruments.
  • E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
  • E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
  • 65,99 € EN AMAZON
Waveshare
Waveshare
Waveshare Universal e-Paper Driver Board with WiFi SoC ESP32 Onboard Supports Various SPI e-Paper Raw Panels
Envío gratis
star

88

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • Onboard ESP32, supports Arduino development;Easy to be integrated into wireless applications
  • Provides Android APP, allows to refresh display content via EDR
  • Provides HTML host code, allows to refresh display content via remote webpage, suit for Internet applications
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image Supports popular image formats: BMP, JPEG, GIF, PNG, etc.
  • Includes traditional BR/EDR, and low power BLE
  • 22,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating Via SPI Interface
Envío gratis
star

86

CALIDAD FIABLE

VER EN AMAZON
Amazon.es
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 1.54 Inch E-Paper Display Panel Module V2 Kit 3.3v/5v 200x200 Resolution E-Ink Electronic Screen Partial Refresh for Raspberry Pi/Jetson Nano/Arduino/STM32 with SPI Interface
Envío gratis
star

81

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#6

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.7 Inch E-Paper Display Hat Module Kit 264x176 Resolution 3.3v/5v E-Ink Electronic Paper Screen with Embedded Controller for Raspberry Pi/Jetson Nano/Arduino/STM32 with SPI Interface
Envío gratis
star

80

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.Onboard 4x Keys
  • Ultra low power consumption, basically power is only required for refreshing.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano。Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display Hat 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Envío gratis
star

78

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#8

  • V4 Latest Version Ink display, This is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!
  • No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo.
  • Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Envío gratis
star

71

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#9

  • V4 Latest Version.Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,,but incompatible with Netatmo
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € EN AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch E-Paper Raw Display V4 Panel 250x122 E-Ink Electronic Paper Screen Without PCB, Embedded Controller Partial Refresh SPI Interface, for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B
Envío gratis
star

66

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#10

  • Note:V4 Version,please use corresponding demo code in wiki.This is an E-Ink raw display, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 13,99 € EN AMAZON
e-paper display e paper e-paper e-paper color display stands paper e-paper 10