main logo

Development Board

Los 10 mejores productos de julio de 2025
Última actualización: 13 de julio de 2025
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 with Display, Support 3.7V Li Battery(Not Included)
Envío gratis
star

99

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#1 GANADOR

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € EN AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 SIM7670G 4G Development Board, LTE Cat-1 / WiFi/Bluetooth/GNSS Positioning Support, Global Coverage Multi Band, Suitable for 4G Portable WiFi, Onboard Camera/Antenna
Envío gratis
star

98

CALIDAD MÁXIMA

VER EN AMAZON
Amazon.es
#2

  • Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Built in 512KB SRAM, 384KB ROM, 2MB of PSRAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, featuring superior RF performance.
  • Equipped with the SIM7670G cellular module, supports 4G Cat-1 networking, GNSS positioning and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of SIM7670G, suitable for connecting with PC for dial-up internet or debugging of SIM7670G module
  • Onboard lithium battery charging, solar charging, power management, battery capacity measurement, and related protection circuits, supports USB and solar charging with real-time battery capacity measurement. Onboard 18650 battery holder (18650 battery is NOT included), adapting VBAT pin header for connecting to external 3.7V lithium battery, with anti-reverse protection
  • Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption
  • Comes with GNSS high-precision ceramic antenna, OV2640 camera, acrylic case, etc., easy to develop various applications. Comes with online development resources and manual (including tutorials, demos for 4G portable WiFi and other IoT examples). Equipped with SIM7670G Cat-1 4G communication module to achieve mobile network connection and meet the low-power requirements of IoT, mobile devices, outdoor monitoring, smart home, and other applications.
  • 68,99 € EN AMAZON
Behogan
Behogan
Behogan 3 placas de desarrollo ESP32, módulo NodeMCU, placa de desarrollo ESP-32S, placa de desarrollo de 2,4 GHz, Dual Core WiFi, Bluetooth, 2 en 1, microcontrolador ESP32 USB C, placa de desarrollo
Envío gratis
star

90

CALIDAD DISTINGUIDA

VER EN AMAZON
Amazon.es
#4

  • Placa de desarrollo ESP32 módulos NodeMCU: placa de desarrollo ESP32 módulos NodeMCU integra antena y equilibrio de radiofrecuencia, amplificador de potencia, amplificador de bajo ruido, filtro y módulo de gestión de energía. El módulo Nodemcu-32s integra Bluetooth tradicional, Bluetooth Low Energy y Wi-Fi. La placa de desarrollo ESP32 proporciona prototipos a través de una programación simple a través del script Lua.
  • Soporta tres modos: AP, STA, AP+STA coexisten. El módulo NodeMCU de esta placa de desarrollo ESP32 es el chip ESP32 que es escalable y autoadaptable. La fuente de alimentación y las características de radiofrecuencia son buenas y se pueden ampliar a diferentes aplicaciones. La frecuencia de reloj se puede ajustar desde 80MHz 240MHz y es compatible con RTOS.
  • Bajo consumo de energía: la placa de desarrollo ESP32 integra el equilibrio de antena y radiofrecuencia, amplificador de potencia, amplificadores de bajo ruido, filtros y módulo de gestión de energía. La tarjeta de desarrollo ESP32 se utiliza junto con el chip Wi-Fi y Bluetooth de doble forma de 2,4 GHz. Utiliza la tecnología de alimentación baja de 40 nm. Muy bajo consumo de energía, funciona perfectamente con Arduino IDE.
  • Uso multifuncional: la placa de desarrollo ESP32 módulos NodeMCU Potente, soporta protocolo LWIP, freeRTOS. ESP32 también integra periféricos ricos como sensores táctiles capacitivos, sensores Hall, interfaces de tarjeta SD e interfaces Ethernet.
  • Amplia aplicación: Wi-Fi admite una variedad de conexiones de comunicación y también admite la conexión directa a Internet a través de enrutadores, mientras que Bluetooth permite a los usuarios conectarse a teléfonos móviles o enviar balizas para detectar señales. ESP32 Placa de desarrollo 2,4 GHz Dual Core WLAN Bluetooth CH340C Chip.
  • 15,99 € EN AMAZON
LUCKFOX
LUCKFOX
LUCKFOX-Pico-Mini(B) with 128MB Flash, RV1103 Linux Micro Development Board with Arm Cortex-A7/RISC-V MCU/NPU/ISP,64MB DDR2,with Camera Port,Micro TF Card Slot,Used for Various Intelligent Devices
Envío gratis
star

78

CALIDAD BUENA

VER EN AMAZON
Amazon.es
#7

  • [Powerful Processing Capability] LUCKFOX Pico Mini(B) with 128MB SPI NAND FLASH is equipped with a highly integrated IPC vision processor SoC, RV1103 chip, featuring a single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. With a built-in NPU supporting INT4/INT8/INT16 mixed operations, it delivers a remarkable computing power of up to 0.5TOPs
  • [Advanced Image Processing] The Development Board features a new hardware-based ISP that supports a range of Algorithm Accelerator, including HDR, 3A, LSC, 3DNR, 2DNR, sharpening, and gamma correction. This enables enhanced image quality and correction, making it ideal for various AI-related applications.(The Self-developed third-generation ISP3.2 supports 4 megapixels with multiple image enhancement and correction algorithms such as HDR, WDR, and multi-level noise reduction)
  • [High-performance Encoding] LUCKFOX Pico Mini(B) with 128MB FLASH offers powerful encoding performance with intelligent encoding mode and adaptive stream saving for optimized bit rate. By saving more than 50% of bit rate compared to conventional CBR mode, it ensures high-definition images with smaller file sizes, effectively doubling the storage space
  • [Versatile Application Scenarios] This Development Board is designed for a wide range of applications, such as smart home devices, industrial automation devices, robots and drones, intelligent surveillance devices, intelligent transportation devices, and intelligent medical devices. Its versatility makes it suitable for various AI application scenarios
  • [Developer-Friendly] LUCKFOX Pico Mini(B) with 128MB FLASH supports multiple interfaces, including GPIO(17pins), UART, SPI, I2C, USB, etc., enabling developers to carry out rapid development and debugging. With built-in 16-bit DRAM DDR2, POR, audio codecs, MAC PHY, and RISC-V MCU, it ensures efficient memory bandwidth, streamlined functionality, and low power consumption. It also integrates Micro TF card holder and MIPI CSI 2-lane camera interface, making development simpler
  • 15,99 € EN AMAZON