Cm5 Board
Los 10 mejores productos de octubre de 2025
Última actualización:
8 de octubre de 2025
Waveshare
Waveshare CM5 Mini Base Board (A) Compatible with Raspberry Pi Compute Module 5 Lite/eMMC Series, Suitable for Evaluating The Raspberry Pi CM5 or Being Integrated into End Products
Envío gratis
99
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header; Suitable for Compute Module 5 Lite/eMMC series module
Onboard multiple connectors, more convenient to use
Gigabit Ethernet RJ45 connector; 16PIN PCIe (PCIe Gen2/3 x1); USB 3.2 Gen1 Type A × 2, USB 2.0 via 6PIN 1mm FFC connector × 2; 5V, 4PIN JST-SH PWM connector; DC 5V 5A power input
4-lane MIPI interface × 2 (22pin 0.5mm FFC connector); HDMI port × 2 (including one port via FFC connector), supports dual 4K outputs; TF card slot for Compute Module 5 Lite (without eMMC) variants;
Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
32,99 € EN AMAZON
Waveshare
Waveshare CM5 Pi Compute Module 5，Comes with an Official Raspberry Pi CM5108000 (with Wireless, 8GB RAM, 0GB eMMC Flash), an Antenna Kit and a HEATSINK
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
8GB RAM, 0GB eMMC Flash, with WIFI
Raspberry Pi Compute Module 5 is a system on module (SoM) that delivers the power of Raspberry Pi 5 in a compact form factor, integrates a quad-core Arm Cortex-A76 processor, providing a variety of RAM and eMMC flash options, supports power circuitry and a rich set of interfaces.
Compute Module 5 enables you to leverage Raspberry Pi 5's powerful hardware and optimised software stack in your own custom systems and form factors. Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance More options for RAM (2GB / 4GB / 8GB / 16GB) More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
Faster eMMC Flash storage, up to 200 Mbps data rate Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications Adopts B to B connectors, most compatible with Compute Module 4
Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
128,99 € EN AMAZON
Waveshare
CM5 Waveshare Pi Compute Module 5 CM5104032 (with WiFi Module, 4GB RAM, 32GB Flash eMMC), Raspberry Pi Computing Module Core Board, Also Comes with an Antenna and a Heatsink (3 Items)
Envío gratis
92
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
The Raspberry Pi CM5104032 ( CM5 module ) is a System-on-Module ( SoM ) with a new CPU upgrade to the BCM2712, a quad-core Cortex-A76 64-bit processor for more powerful performance
4GB of RAM, 32GB of eMMC flash memory (eMMC flash memory is faster with transfer rates up to 200 Mbps)
Dual-band (2.4GHz/5.0GHz) IEEE 802.11b/g/n/ac wireless WiFi and BT5.0/BLE module on board, support IEEE 1588 Gigabit Ethernet, suitable for network application development
Supports power supply circuit and rich interfaces, adopts B to B connector design, mostly compatible with CM4
Comes with PCIe interface for flexible expansion of related modules. On-board PCB antenna and external antenna can be accessed, more suitable for industrial applications
113,99 € EN AMAZON
Geekworm
Geekworm X1501 CM5 IO Carrier Board for Raspberry Pi Compute Module 5 Support Dual M.2 NVMe SSD|1GbE+2.5GbE Ethernet Puertos
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Compatibility: X1501 is compatible with Raspberry Pi Compute Module 5 CM5 and all CM5 variants
Function: Support Dual M.2 NVMe SSD, with Dual Ethernet Ports 1GbE and 2.5GbE, USB2.0 + USB3.0 ports, Dual Hdmi 2.0 Ports, Dual MIPI DSI/CSI-2 Connectors, RTC, PWM Fan connector and convenient power button
How to Power: 5.1Vdc +/-5% 5A power via USB-C port of X1501; Please use power supply capable of delivering 5.1V at 5A output, an incompatible power supply with a lower output voltage may fail to power on the system
Packing List: 1 x X1501 CM5 IO Carrier Board, 1 x Screws Pack Accessories
Matching Metal Case (Not included): Case for Raspberry Pi CM5 and X1501 IO board, refer to X1500-C1 case (ASIN: B0F5WXFX3R)
69,00 € EN AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
Envío gratis
84
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
46,99 € EN AMAZON
Waveshare
Nano Base Board (A) for Raspberry Pi Compute Module 5 Lite/eMMC,Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Nano Base Board (A) for Raspberry Pi Compute Module 5 Lite / eMMC
Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Same Size As The CM5.Compact size and fully functional, With Multiple Peripheral Interfaces, Suitable for Narrow Application Environments
With powerful features integrated into a compact design, it is only the size of a CM5 with USB3.2 Gen1 interface onboard.
Storage:TF card socket for Compute Module 5 Lite (without eMMC) variants
23,03 € EN AMAZON
Geekworm
Geekworm X1500 CM5 IO Carrier Board for Raspberry Pi Compute Module 5 Support Dual M.2 NVMe SSD|1GbE Ethernet Port
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
Compatibility: X1500 is compatible with Raspberry Pi Compute Module 5 CM5 and all CM5 variants
Function: Support Dual M.2 NVMe SSD, with 1GbE Ethernet Ports, Dual USB 3.0 Ports, Dual Hdmi 2.0 Ports, Dual MIPI DSI/CSI-2 Connectors, RTC, PWM Fan connector and convenient power button
How to Power: 5.1Vdc +/-5% 5A power via USB-C port of X1500; Please use power supply capable of delivering 5.1V at 5A output, an incompatible power supply with a lower output voltage may fail to power on the system
Packing List: 1 x X1500 CM5 IO Carrier Board, 1 x Screws Pack Accessories
Matching Metal Case (Not included): Case for Raspberry Pi CM5 and X1500 IO board, refer to X1500-C1 case (ASIN: B0F5WXFX3R)
58,00 € EN AMAZON
Waveshare
Waveshare Interface Protection Adapter Board For Raspberry Pi Compute Module Series, Provides Physical Protection For Frequent Plugging and Unplugging of CM4 / CM5 Socket
Envío gratis
78
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Interface Protection Adapter Board For Raspberry Pi CM4 / CM5
Based On Raspberry Pi CM4 / CM5: Onboard Standard CM4 / CM5 Connectors, Supports Access To The Lite / EMMC Series Of CM4 / CM5 And Connecting To Corresponding Baseboard Or Expansion Board
Physical Protection For Frequent Plugging And Unplugging: Prevents Damage To The CM4 / CM5 Socket From Frequent Physical Plugging And Unplugging, Suitable For Applications That Require Frequent Connections Of CM4 / CM5
Easy installation: You can easily connect the Compute Module 4 to Compute Module 4 IO Board via CMX-ADAPTER; You can also easily connect the Luckfox Core3566 Module to Touch screen expansion board via CMX-ADAPTER
13,99 € EN AMAZON
Waveshare
Waveshare Nano Base Board (B) For Raspberry Pi Compute Module 5, Same Size As The CM5
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
As the mini IO board of the Raspberry Pi Compute Module 5, CM5-NANO-A is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features integrated into a compact design, it is only the size of a CM5 and has interfaces including USB 3.2 Gen1, HDMI, audio, Ethernet port, etc.
Onboard default USB 3.2 Gen1 port.Type C can be used as a USB SLAVE interface to flash images.
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
USB TYPE A interface maximum power output 2A. It is forbidden to unplug and unplug any device other than USB when it is charged
27,99 € EN AMAZON
Waveshare
Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 5, Same Size as The CM5
Envío gratis
67
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
Nano Base Board (A) For CM5, Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Base Board for Compute Module 5 Lite / eMMC
Same Size As The CM5, Compact Size And Fully Functional, With Multiple Peripheral Interfaces, Suitable For Narrow Application Environments
23,99 € EN AMAZON
cm5
cm5 io board
#1 GANADOR
