Can Module Raspberry
Los 10 mejores productos de mayo de 2025
Última actualización:
24 de mayo de 2025
RUIZHI
MCP2515 Can Bus Módulo RUIZHI 5 Piezas MCP2515 Can Bus Shield Basado en Receptor TJA1050 Soporta tecnología Can V2.0B Protocolo SPI Compatible con Arduino con Raspberry Pi
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
Transmisión de alta velocidad：El módulo CAN MCP2515 soporta el estándar CAN V2.0B, velocidad de comunicación de hasta 1Mb/s para una transferencia de datos estable.
Conformidad con CAN V2.0B：Soporta tramas estándar/extendidas/remotas con longitud de datos de 0-8 bytes, ideal para diagnósticos de automoción y automatización industrial.
Bajo consumo de energía：MCP2515 módulo CAN corriente típica de trabajo de 5mA, corriente de espera de 1μA, prolongando la vida útil del dispositivo.
SPI Interface Control：Compacta PCB de 4x2.8cm con entrada de 5V DC, compatible con Arduino/con microcontroladores Raspberry Pi/STM32.
Compatibilidad：Soporta MCP2515 CAN controlador y receptor TJA1050, compatible con el protocolo SPI, adecuado para 51 microcontroladores y controladores ARM.
10,99 € EN AMAZON
innomaker
InnoMaker USB to Can Converter Module for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Beaglebone/Tinker Board Any Single Board Computer Mac Os Equal or Above v10.11
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
InnoMaker USB to CAN Converter compatible with all Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Beaglebone/Tinker Board/any single board computer and Mac Os equal or above v10.11.
Plug and Play USB device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support CAN bus 2.0A and 2.0B specification.
Power supply isolation, signal input/output isolation, Built-in surge and static protection. 120 Ohm resistor selectable jumper feature.
Quality Assurance with CE Verification and FCC SDOC Verification from SGS-CSTC.
Provide C/Python demos with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os.
32,99 € EN AMAZON
Waveshare
RS485 RS232 Hat para Raspberry Pi Aislado RS485 RS232 Placa de Expansión Adoptar SC16IS752+SP3485, SP3232 Esquema, Convierte SPI a RS485, RS232, Tasa de Comunicación de hasta 921600bps
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
RS485 RS232 HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero 2 W, with standard Raspberry Pi 40PIN GPIO extension header, suitable for Raspberry Pi series boards
RS485 RS232 expansion HAT board adopt the combination scheme of SC16IS752 uart expansion chip, SP3485 RS485 transceiver and SP3232 RS232 transceiver, converts SPI to one RS485 and one RS232
Built-in power isolation, ADI magnetic coupling isolation and TVS, resettable fuse and other protection circuits, can effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
Breakout SPI control pins, for connecting with Arduino and other host control boards
Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!
26,90 € EN AMAZON
Freenove
Freenove I2C IIC LCD 1602 Module, New Type TWI Serial 16x2 Display, Compatible with Arduino Raspberry Pi Pico ESP32 ESP8266
Envío gratis
90
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
LCD 1602: This module can display 2 lines of characters, with 16 characters per line
I2C / IIC Interface: Saves a lot of ports compared to parallel interface (This new model integrates the conversion circuit, making it more stable)
Detailed Tutorial: Provides step-by-step guide and detailed explanations (The download link can be found on the product box) (No paper tutorial)
Compatible Models: Compatible with mainstream models of Arduino / Raspberry Pi / Raspberry Pi Pico / ESP32 / ESP8266, with example project and code (Other controllers are also compatible but without examples)
Get Support: Our technical support team is always ready to answer your questions
8,95 € EN AMAZON
Waveshare
Funda para Raspberry Pi 5, carril DIN, carcasa ABS compatible con Raspberry Pi HATs PoE Hat (F), RS485 CAN HAT, etc. Ventana superior transparente, gran espacio interior, modulación de inyección
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
Carcasa ABS con riel DIN para Raspberry Pi 5
Soporte de montaje en riel DIN, cuerpo ABS modulador de inyección, fácil de usar
Compatible con varios sombreros Raspberry Pi, como PoE HAT (F), RS485 CAN HAT, 2-CH RS485 HAT, etc. El gran espacio interior permite acomodar un complemento adicional
15,39 € EN AMAZON
LUCKFOX
LUCKFOX RS485 Can Module, Waveshare RS485 Can Expansion Board, for RPi to Communicate with Other Devices in a Long Distance, Based on Pi 40pin GPIO Interface, for Raspberry Pi Series Motherboard
Envío gratis
81
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
Entry level 485 and CAN without isolation. Based on Pi 40pin GPIO interface, compatible with Raspberry Pi series motherboard
Features CAN communication function, using SPI interface CAN controller MCP2515, with transceiver SIT65HVD230DR
Features RS485 communication function, using UART control, half duplex communication, supporting automatic switching of transceiver status without program control, and the transceiver is SP3485
On board TVS(transient voltage suppression tube) and RS485 communication can effectively suppress the surge voltage and transient peak voltage in the circuit, and avoid static electricity
The control interface is reserved to facilitate the control of other controllers; Provide a complete manual of supporting materials (provide routines for wiringPi/python). Please ask 24-hour customer service for relevant routines
20,99 € EN AMAZON
innomaker
RS485 Can Hat for Raspberry Pi Via SPI Onboard 1 x Can Bus MCP2515 Transceiver 2 x RS485 Bus SC16IS1752, Signal and Power Isolated, ESD Protection Port, Stable Long-Distance Communication Module
Envío gratis
79
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
The RS485 CAN Module compatible with Raspberry Pi 4 / Zero / Zero W / 2B / 3B / 3B+. Only a small amount of GPIO are used and the rest pins allow to work for other extended function.
Support the latest Raspbian(v5.4 kernel), Power supply and signal transmission isolation, Build-in surge and ESD protection.On-board individual 120 Ohm terminal resistance.
CAN Function - Onboard CAN controller MCP2515 via SPI interface, onboard high speed CAN transceiver, onboard digital isolation ADUM1201BRZ, Communication Rates 20Kbps-1Mpbs can be programmed arbitrarily.
RS485 Function - Controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard SPI to RS485 SC16IS1752. Electrical data isolation ADM2483.
We offer C/Python demo and Modbus communication demo. For more information please refer to our wiki（view the link on color page comes with the goods).
32,00 € EN AMAZON
Raspberry Pi
Raspberry Pi Camera Module V2 8MP
75
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Módulo de cámara capaz de una resolución de 3280 x 2464 pixeles
Captura de vídeo a 1080p/30, 720p/60 y 640p x 480p/90
Sensor de imagen Sony IMX219 de 8MP
Dimensiones del producto de 25 x 23 x 9 mm
30,80 € EN AMAZON
Waveshare
Waveshare LC29H Series Dual-Band GPS Module for Raspberry Pi, Dual-Band L1+L5 Positioning Technology, Supports RTK Base, Can Establish a Base Station to Transmit Correction Data
Envío gratis
70
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
Supports GNSS raw observation and correction data output, suitable for establishing RTK base station
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds Support QGNSS software, easy to set various module functions
78,99 € EN AMAZON
AZDelivery
AZDelivery 5 x Modulo MCP2515 Can Bus Shield Compatible con Arduino con E-Book Incluido!
Envío gratis
65
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
✔️ ¡Obtenga cinco Módulos MCP2515 CAN Bus Shield a un precio especial de descuento por cantidad!
✔️ El AZDelivery Módulo MCP2515 CAN a SPI Bus es un módulo de bus autónomo de Red de Área de Control (CAN) que implementa la especificación CAN, versión 2.0 B. y la convierte a interfaz SPI
✔️ Con el MCP2515 se conecta el CAN-Bus a los microcontroladores a través de una interfaz SPI.
✔️ Las resistencias de terminación de 120 ohmios y la adaptación de impedancia del módulo MCP2515 CAN aseguran la capacidad de la unidad y la transmisión remota de datos contra el ruido de la señal. La velocidad de comunicación hasta 1Mb/s.
✔️ Este producto incluye un E-Book que proporciona información útil sobre cómo comenzar su proyecto, ayuda con una configuración rápida y ahorra tiempo en el proceso de configuración. Proporcionamos una serie de ejemplos de aplicación, guías de instalación completas y bibliotecas.
18,99 € EN AMAZON
can module
raspberry module
gsm module raspberry
#1 GANADOR
