Betafpv Pavo Pico
Los 10 mejores productos de julio de 2025
Última actualización:
13 de julio de 2025
BETAFPV
BETAFPV Pavo Pico ELRS Brushless Whoop Quadcopter Ultra-Light 2S Cinewhoop with HD VTX Bracket, F4 2-3S 20A AIO Flight Controller, 1102 14000KV Motor for DJI O3 Air for Cruising Indoors Outdoors
Envío gratis
98
CALIDAD MÁXIMA
VER EN AMAZON
Amazon.es
#1 GANADOR
▼ Mostrar más
▲ Mostrar menos
【Ultralight Cinewhoop】Pavo Pico is an ultra-light 2S cinewhoop with a small wheelbase that is not only equipped with 45mm propellers but also the latest F4 2-3S 20A AIO FC which greatly heightens the flying experience. Its design is well-suited for cruising indoors and outdoors alike.
【Split-Design Frame】The split-design HD VTX mounting bracket is compatible with DJI O3 Air Unit module. The side bracket, rubber damper vibration-damping design, lens holder, and antenna have all been reinforced to suppress low-frequency vibration and enhance the safety of HD VTX, ensuring a stable output of high-definition videos. Simply connect the VTX cable and complete the binding process to start flying.
【Frame Material】Ultra-light PP material is used to make the HD VTX mounting bracket, increasing its toughness. Whoop frame is constructed using PA12 material, known for its exceptional impact resistance and effortless installation process. The antenna fixing slot and frame have been fused to reduce damage risk, while the camera's installation height has been lowered with a protective printed part to limit its movable angle to within 30°.
【Camera Filter】To safeguard the DJI O3 camera lens and maintain consistent high-definition video output during flight, both a lens filter and a lens protection mount are included. With this feature, you can achieve slower shutter speeds or wider apertures when flying. These lightweight filters are crafted from high-quality optical class ensuring optimal image clarity and are too easy to install on the build.
【Battery Slot】The battery slot and HD VTX mounting bracket duct height have been reduced to enhance the overall flying experience. DIY battery fixing methods are also supported, making them compatible with batteries of varying sizes and capacities.
VER EN AMAZON
BETAFPV
BETAFPV Pavo Pico Brushless Whoop Frame with HD VTX Bracket, 80mm Wheelbase, PA12 Material, Ultra-Light, Toughness, for HD Digital VTX like DJI O3 Air Unit, Walksnail Avatar HD Pro, Caddx Vista Kit
Envío gratis
96
CALIDAD SUPERIOR
VER EN AMAZON
Amazon.es
#2
▼ Mostrar más
▲ Mostrar menos
【Pavo Pico Frame】The Pavo Pico frame kit is a split design frame with an HD VTX mounting bracket. Die-cast screw whoop frame design increased whoop quadcopter strength and precision, enhance flight stability, and improved reliability.
【HD VTX Bracket】HD digital VTX bracket made of lightweight and tough injection-molded PP material with an adjusted structure to prevent HD VTX displacement or loss after the crash.
【Vibration Damping Design】We have incorporated the Rubber Damper design to reduce low-frequency vibrations, which is used with GyroFlow stabilization software for a stable and clear camera image during high-speed flight.
【More Batteries Choices】With 16mm*12.7mm battery slot size, recommend pilots use 450mAh 2S batteries. To accommodate a wider range of battery sizes, the main body of the frame can be trimmed through DIY methods at the same time. Additionally, larger batteries can be installed by using battery straps or printed components.
【Compatible HD Kits】Pavo Pico brushless whoop frame supports to install the DJI O3 directly, while Avatar and Vista require a 20*20 mounting plate and screws (included) for fixation. Install quickly and effortlessly, while meeting pilots' various DIY needs, and exploring more possibilities for flying.
14,99 € EN AMAZON
BETAFPV
BETAFPV LiteRadio 3 RC Radio Transmitter with Nano Module Bay for External TX Module Support Simulator Joystick Calibration Firmware Update for RC Models Multirotor Airplane Drone - Frsky Mode 2
Envío gratis
95
CALIDAD EXCELENTE
VER EN AMAZON
Amazon.es
#3
▼ Mostrar más
▲ Mostrar menos
【Nano Joystick Gimbal】 LiteRadio 3 has a newly designed Joystick Gimbal. With ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it is long longevity up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight
【Nano Module Bay】LiteRadio 3 reserved a nano bay on the backside, it supports CRSF protocol external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available
【Long Use Time】Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously
【BETAFPV Configurator Supported】LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy and convenient, further to fulfilled your different fly requirement
【FPV Simulator Supported】LiteRadio 3 is ergonomic and has the shape of a gaming controller. Adopted the rubber coat, comfortable to hold, and the anti-slip texture on the handles allow for a solid grip. It has the function of FPV simulator which can act as a USB Joystick when connected to PC, supports most of the simulators on market with comprehensive configuration
54,99 € EN AMAZON
BETAFPV
BETAFPV 2 baterías de litio de Lava 550 mAh 2S 7,6 V 75 C LiHV con conector XT30, batería recargable FPV para drones 2S FPV Racing Whoop Drone Quadcopter como Meteor85, Pavo Pico 2S sin escobillas
Envío gratis
88
CALIDAD DISTINGUIDA
VER EN AMAZON
Amazon.es
#4
▼ Mostrar más
▲ Mostrar menos
Proceso de plegado Z: el proceso de plegado Z mejora la densidad de energía en un 5 % en comparación con el proceso de bobinado, lo que prolonga el tiempo de vuelo y reduce las molestias de cambiar la batería.
【Alta tasa de C】 Con una tasa de descarga aumentada de 75C, proporciona un mayor rendimiento de ráfaga para un rendimiento de vuelo superior y maniobrabilidad para un control sin precedentes.
【Tiempo más largo】Con una mayor duración de la batería, garantiza un mayor soporte de energía, lo que garantiza un rendimiento duradero y fiable del piloto.
Múltiples aplicaciones: la batería de polímero de litio LAVA 550 mAh 2S viene con un conector XT30 con alambre de silicona de 16 AWG, funciona con voltaje de 7,6 V, adecuada para drones FPV 2S como Meteor85, Pavo Pico y otros quadcopters sin escobillas de drones Whoop 2S en el mercado.
【Paquete y soporte】Recibirás 2 baterías de polímero de litio LAVA 550 mAh 2S con conector XT30; si necesitas soporte técnico, puedes encontrarnos fácilmente a través de Amazon.
30,99 € EN AMAZON
BETAFPV
BETAFPV 2pcs Lava 550mAh 3S 11.4V LiHV 75C FPV Lipo Battery with XT30 Connector, Rechargeable Lipo Battery for 3S FPV Racing Whoop Drone Quadcopters Like Pavo20 3S Brushless Drone, Pavo Pico Frame
Envío gratis
87
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#5
▼ Mostrar más
▲ Mostrar menos
【Z-Folding Process】Featuring the Z-Folding Process, it achieves a 5% energy density upgrade compared to the Winding Process, extending flight time and reducing battery replacement inconvenience.
【High C-Rate】With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
【Longer Time】With an extended battery cycle life, it ensures prolonged power support, bringing pilots sustained and reliable performance.
【Various Application】LAVA 550mAh 3S lipo battery comes with an XT30 plug with 16AWG silicone wire, operating at 11.4V voltage, suitable for 3S FPV drones like Pavo20, and other 3S drones with XT30 connector.
32,99 € EN AMAZON
BETAFPV
BETAFPV F4 2-3S 20A AIO Brushless Flight Controller, for HD 2-3S HD Whoop Quadcopter like Pavo Pico/Pavo20/Pavo20 Pro/Pavo Femto
Envío gratis
82
CALIDAD FIABLE
VER EN AMAZON
Amazon.es
#6
▼ Mostrar más
▲ Mostrar menos
It features a dual 9V@2A for DJI O3 Air and 5V@3A for external device BEC
Including a new 6-pin PMU for easy installation without solder
Improving control with a 20A ESC featuring a single NMOS for continuous current capability
It offers additional UART TX3 and RX3 ports for connecting the external device
64,99 € EN AMAZON
BETAFPV
BETAFPV 2pcs Lava 450mAh 3S 11.4V LiHV 75C FPV Lipo Battery with XT30 Connector, Rechargeable Lipo Battery for 3S FPV Racing Whoop Drone Quadcopters Like Pavo20 3S Brushless Drone, Pavo Pico Frame
Envío gratis
80
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#7
▼ Mostrar más
▲ Mostrar menos
【Z-Folding Process】Featuring the Z-Folding Process, it achieves a 5% energy density upgrade compared to the Winding Process, extending flight time and reducing battery replacement inconvenience.
【High C-Rate】With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
【Longer Time】With an extended battery cycle life, it ensures prolonged power support, bringing pilots sustained and reliable performance.
【Various Application】LAVA 450mAh 3S lipo battery comes with an XT30 plug with 16AWG silicone wire, operating at 11.4V voltage, suitable for 3S FPV drones like Pavo20, other 3S drones with XT30 connector.
【Package&Support】You will receive 2pcs LAVA 450mAh 3S lipo battery with XT30 plug; Any technical support is needed just feel free to find us via Amazon.
30,99 € EN AMAZON
BETAFPV
BETAFPV Pavo20 Pro Brushless Whoop Quadcopter with HD Digital Bracket Compatible for O4 Air Unit Pro, with 1104 7200KV Motor, F4 2-3S 20A FC, COB LED Strip for FPV Freestyle Shooting
Envío gratis
74
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#8
▼ Mostrar más
▲ Mostrar menos
Upgraded: This Pavo20 Pro 2.2'' cinewhoop drone quadcopter has an HD digital bracket compatible with the O4 Air Unit Pro. Under 150g, the pocket-sized Pavo20 Pro is ideal for pilots to enter FPV. Exclusively sculpted for FPV freestyle shooting
Freestyle-Optimized Propulsion: The GF 2218 3-Blade Props (co-developed with Gemfan) and LAVA 1104 | 7200KV Brushless Motors offers unparalleled thrust, while the aerodynamic frame adds an 8–11% boost for aggressive maneuvers. Easily swap between the O3 Air Unit Bracket and O4 Air Unit Pro Bracket to accommodate your preferred HD VTX
Cinematic Stability: The injection-molded HD VTX and Pavo Series' Classic Rubber Damper ensures jitter-free footage, while the dual cam fixed holes for O4 Air Unit Pro wide-angle shooting and optimized antenna holder gurantees every frame you captured is perfect
Flight Controller: Equipped with F4 2-3S 20A AIO flight controller integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. It includes a O3/O4 6-pin PMU allowing for connection to HD VTX without soldering. Its improved computing power, high response speed, and stable flight make it an ideal choice for Freestyle
Modular HD VTX Bracket System: The latest Pavo20 Pro brushless whoop drone comes with a new modular HD VTX bracket for O4 Air Unit Pro. It also compatible for the O3 Air Unit by swapping the bracket, no frame integrated injection-molded bracket for hassle-free setup with just 8 screws—no tedious screw adjustments needed
139,99 € EN AMAZON
BETAFPV
BETAFPV Pavo Femto Brushless Whoop Quadcopter, 2S Pocket Drone with HD VTX Bracket for DJI O4 Air Unit, F4 2-3S 20A FC, LAVA 1102|14000KV Motor, for Flying Smooth Aerial Photography Freestyle Flight
Envío gratis
72
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#9
▼ Mostrar más
▲ Mostrar menos
2S 4K Pocket Drone: BETAFPV Pavo Femto is a 2S high-definition brushless drone tailored for the DJI O4 Air Unit, delivering exceptional 4K/60fps video recording and unparalleled 2S 4K flight performance in a compact design. With customizable settings and robust components, the Pavo Femto excels in both freestyle flying and aerial videography (Comes without DJI O4 Air Unit by default)
High-Performance Propulsion System: Equipped with the new LAVA 1102|14000KV motors, Gemfan 1611 3-Blade propellers and optimized frame, the Pavo Femto boasts an impressive thrust-to-weight ratio of 6.75:1. Its compact, lightweight build ensures agility and stability, making it the ultimate 2S 4K pocket drone for both beginners and experienced pilots
Pavo Femto Frame Kit: The Pavo Femto Brushless Whoop Frame delivers a 4% thrust increase in a compact design, offering enhanced power and stability. It features improved connections between the whoop duct and carbon fibre plate with added supports and limits for secure assembly. Optimized for the DJI O4 Air Unit, it includes a reinforced protective structure for the circuit board. Meanwhile, its modular design is compatible with Pavo Pico and Pavo20 components
Shock-Absorbing Components: To ensure crystal-clear video, the Pavo Femto includes a specialized shock-absorbing system for the DJI O4 Air Unit. Made from ultra-strong POM material, the shock-absorbing components effectively isolates high-frequency vibrations, reducing jello effect and delivering stable, professional-grade footage
Fine Tune Your Flight: Fine Tune Your Flight: Precisely tuned for both aerial videography and freestyle flying, the Pavo Femto comes with optimized PID and RATE settings. Its advanced F4 20A flight controller with dual BECs, supporting 9V 2A for DJI O4 Air Unit and 5V 3A for external devices ensures responsive, agile handling, making it perfect for capturing dynamic shots or mastering acrobatic manoeuvres
139,99 € EN AMAZON
BETAFPV
BETAFPV Pavo20 Pro Brushless Whoop Quadcopter 2.2inch Cinewhoop with HD Digital Bracket, LAVA 1104 7200KV Motor GF2218 3-B Prop Compatible for DJI O3/Caddx Vista/Runcam Link for FPV Freestyle Shooting
Envío gratis
68
CALIDAD BUENA
VER EN AMAZON
Amazon.es
#10
▼ Mostrar más
▲ Mostrar menos
As a 2.2'' cinewhoop drone quadcopter under 150g, the pocket-size Pavo20 Pro is an ideal choice for DJI pilots to enter FPV. Supports various types of HD digital VTX systems like DJI O3 Air unit/Caddx Vista/Runcam Link etc.Exclusively sculpted for FPV freestyle shooting
Continuing the frame structure of Pavo20, we improved the whoop duct, combined LAVA1104 7200KV motor, and 2.2'' lower pitch Gemfan 2218 3-blade propeller propulsion system, this equipment offers unparalleled max thrust for freestyle. It achieves a thrust-to-weight ratio greater than 5:1, delivering a faster and more agile freestyle
Integrated injection molding HD VTX mounting bracket, has a split design that makes it effortless to install for pilots DIY, and explores more possibilities while ensuring HD image quality. The camera side panel and 6-point fixation hole design precisely safeguard the lens, guaranteeing uncompromised lens protection, including 2 new cam fixed holes for the wide-angle mode shooting, minimizing the cam side panel shadows for the wide-angle view
Pavo20 Pro with a 93.7mm wheelbase frame is constructed with a crash-proof PA12 thickened whoop duct, its reinforced cross-section design enhances the strength and blast resistance, ensuring durability in demanding flight conditions. It also accommodated COB LED strips seamlessly which can be securely mounted on the frame whoop duct, adding unique lighting effects and a visually captivating appearance.
Equipped with F4 2-3S 20A AIO flight controller integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. It includes a DJI O3 6-pin PMU allowing for connection to HD VTX without soldering. Its improved computing power, high response speed, and stable flight make it an ideal choice for Freestyle
139,99 € EN AMAZON
pavo pico
betafpv pavo 30
betafpv pavo 35
betafpv pavo 25
betafpv pavo femto
#1 GANADOR
